Претраживање
Приказ резултата 11-20 од 69
Electrochemical and sorption characteristics and thermal stability of epoxy coatings electrodeposited on steel modified by Zn-Co alloy
(Elsevier Science Sa, Lausanne, 2002)
The corrosion behaviour, transport properties and thermal stability of epoxy coatings electrodeposited on steel and steel modified by Zn-Co alloys were investigated during exposure to 3% NaCl solution. The electrochemical ...
Electrochemical deposition and characterization of zinc-nickel alloys deposited by direct and pulse current / Elektrohemijsko taloženje i karakterizacija legura cink-nikal dobijenih konstantnom i pulsirajućom strujom
(Serbian Chemical Society, Belgrade, 2002)
Chemical composition and phase structure of Zn-Ni alloys obtained by electrochemical deposition under various conditions were investigated. The alloys were deposited on a rotating disc electrode and steel panel from chloride ...
Electrochemical properties and thermal stability of epoxy coatings electrodeposited on aluminium and modified aluminium surfaces / Elektrohemijske karakteristike i termička stabilnost epoksidnih kataforetskih prevlaka na aluminijumu i modifikovanim površinama aluminijuma
(Serbian Chemical Society, Belgrade, 2001)
The corrosion behavior of epoxy coatings electrodeposited on aluminum, as well as on electrochemically and chemically modified aluminum were investigated during exposure to 3 % NaCl. Electrochemical impedance spectroscopy ...
Electrochemical and sorption characteristics of metacryloxypropyltrimethoxysilane coatings / Elektrohemijske i sorpcione karakteristike prevlaka metakriloksipropiltrimetoksisilana
(Engineering Society for Corrosion, Belgrade, Serbia, 2008)
The aim of this work was to investigate the influence of deposition parameters (silane solution concentration, deposition time, curing time) on electrochemical and sorption characteristics of metacryloxypropyltrimethoxysilane ...
The influence of steel surface modification by electrodeposited Zn-Fe alloys on the protective behaviour of an epoxy coating
(Elsevier Science Sa, Lausanne, 2003)
The electrochemical and transport properties of epoxy coatings electrodeposited on steel and steel modified by Zn-Fe alloys were investigated during exposure to 3% NaCl. The Zn-Fe alloys were deposited on steel surface ...
The study of corrosion stability of organic epoxy protective coatings on aluminium and modified aluminium surfaces
(Soc Brasileira Quimica, Sao Paulo, 2005)
Epoxy coatings were formed by cathodic electrodeposition of an epoxy resin on aluminium and modified aluminium surfaces (phosphatized, chromatized-phosphatized and anodized aluminium) using a constant voltage method (resin ...
(NH4)2SO4 corrosion of cement in concrete analyzed by an improved mathematical model / (NH4)2SO4 korozija cementa u betonu analizirana poboljšanim matematičkim modelom
(Serbian Chemical Society, Belgrade, 2009)
This paper gives a critical analysis of the equation that predicts and estimates the progress of degradation for various building materials, recently proposed by Matsufuji et al.1 After the analysis, the paper suggests an ...
Mechanics of submerged jet cavitating action: material properties, exposure time and temperature effects on erosion
(Springer, New York, 2008)
Experimental setup with a submerged cavitating jet has been used for the study of influences of material, exposure time and working fluid temperature on the erosion process. Each of the parameters has been varied separately, ...
Corrosion studies on electrochemically deposited PANI and PANI/epoxy coatings on mild steel in acid sulfate solution
(Elsevier Science Sa, Lausanne, 2005)
The corrosion behavior of mild steel and mild steel covered by electrochemically deposited (a) polyaniline (PANI) film, (b) epoxy coating
and (c) PANI/epoxy coating system in 0.1 M sulfuric acid solution were investigated ...
Corrosion protection of aluminium by a cataphoretic epoxy coating
(Elsevier Science Sa, Lausanne, 1999)
The corrosion behavior and thermal stability of epoxy coating electrodeposited on aluminium have been investigated during exposure to 3% NaCl. Electrochemical impedance spectroscopy (EIS), gravimetric liquid sorption ...