Претраживање
Приказ резултата 1471-1480 од 1481
Mathematical modeling of zinc ions biosorption by short hemp fibers / Matematičko modelovanje procesa biosorpcije jona cinka kratkim vlaknima konoplje
(Union of Textile Engineers and Technicians of Serbia, Belgrade, 2013)
Waste hemp fibers were used as an efficient biosorbent for removal of zinc ions from polluted water. In order to obtain the material with better sorption properties, short hemp fibers were chemically modified. The following ...
Arsenic(III) adsorption from aqueous solutions on novel carbon cryogel/ceria nanocomposite
(Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad, 2016)
Carbon cryogel/ceria composite, with 10 wt.% of ceria, was synthesized by mixing of ceria and carbon cryogel (CC). The sample was characterized by field emission scanning electron microscopy, nitrogen adsorption and X-ray ...
Image analysis as a useful tool for fast detection of dimensional and structural changes of poly(ethylene terephthalate) containers
(Savez hemijskih inženjera, Beograd, 2018)
The aim of this paper is to present image analysis as a useful technique for fast, reliable and non-destructive detection of dimensional and structural changes in polymers. The possibility of applying image analysis was ...
Effect of alumina based particles on mechanical properties and resistance to acryloid composites cavitation / Uticaj čestica na bazi aluminijum oksida na mehanička svojstva i otpornost na kavitaciju akriloidnih kompozita
(Savez inženjera i tehničara Srbije, Beograd, 2018)
In the processes of preservation and restoration of sculptures and archaeological objects, copolymer materials of acrylate type are used because they have proved useful in conservation practice. The main disadvantage of ...
The influence of the shape and size of the AL2O3 particles on the flexural properties of the PMMA composite modified by the addition of dimethyl itaconate / Uticaj oblika i veličine čestica AL2O3 na savojna svojstva PMMA kompozita modifikovanog dodatkom dimetil itakonata
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Dental materials have specific requirements regarding behavior in exploitation conditions. Poly (methyl methacrylate) (PMMA) is one of the most commonly used prosthetic materials. It is of interest to improve the mechanical ...
The shape of the polarization curve and diagnostic criteria for control of the metal electrodeposition process
(Serbian Chemical Society, 2016)
The simulated shapes of the polarization curves were correlated with the type of metal electrodeposition process control as a function of the ratio of the exchange current density to the limiting diffusion current density ...
Kinetics and thermodynamics of Mo(VI) and Re(VII) sorption on amino-functionalized magnetic polymer
(Belgrade : Society of Physical Chemists of Serbia, 2018)
Kinetics and thermodynamics of Mo(VI) and Re(VII) sorption onto amino
functionalized magnetic poly(glycidyl methacrylate-co-ethylene glycol
dimethacrylate) [mPGME-deta] at 298 K and pH=4.0 were investigated. It
was shown ...
Improvement of cavitation resistance of composite films using functionalized alumina particles
(Savez hemijskih inženjera, Beograd, 2018)
Composite films having the UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as a matrix and the ferrous oxide doped alumina (Al2O3 Fe) based particles were prepared and subjected ...
Cavitation of refratory samples based on talc and domestic zeolite / Ispitivanje vatrostalnih uzoraka na bazi talka i domaćeg zeolita na dejstvo kavitacije
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Using domestic zeolite from Igroš as row material for ceramic samples for application in condition of cavitation erosion. Samples based on talc with 15 % of zeolite, from Igroš, sintered at 1200oC were used in this ...
The influence of basalt content on the properties of austenitic stainless steel 316L
(Belgrade : Materials Research Society of Serbia, 2018)
The aim of the paper is to examine the influence of basalt content on the properties of austenitic
stainless steel as well as the possibility of using this composite material for wider industrial
application. In the ...