Претраживање
Приказ резултата 11-20 од 187
Creep crack growth - Comparison of two steel P91 and P22
(14th International Conference on Fracture, ICF 2017, 2017)
The deformation and crack growth behaviour of P22 and P91 steel weldments tested at 550 °C and 600 °C, respectively,compact C(T) type specimens with sharp EDM starter notches in the base metal (BM) and heat affected zone ...
Are the Tube Microreactors Future of Wastewater Treatment?
(Belgrade : Association of Chemists and Chemical Engineers of Serbia UHTS, 2019)
In the industry, wastewater is important environmental problem. Due to the growing
environmental concern this problem became one of key issues. Large amounts of highly
contaminated wastewater, as consequence of industrial ...
Industrial use of a new ultrasound spray for coolin and wet gas treatment in the pyrometallurgical processes
(141st Annual Meeting and Exhibition, TMS 2012, 2012)
This paper presents the results of a new industrial use the ultrasonic spray for gas cooling from sulphide copper concentrate roasting in the fluo solid reactor and the results of wet gas treatment (washing) in the scrubber ...
Heat generation and removal in fixed-bed reactors for fischer-tropsch synthesis
(Catalysis and Reaction Engineering Division 2017 - Core Programming Area at the 2017 AIChE Annual Meeting, 2017)
Fabrication and applications of multifunctional nanostructured TiO2
(Belgrade : Faculty of Agriculture, Department for Agricultural Engineering, 2017)
Nanomaterials development is a rapidly emerging field of research with enormous potential for societal and economic benefits. In agro and food industries dimension-dependent properties or phenomena of nanomaterials may be ...
Lubrication regime analysis on sliding bearing example
(5th World Tribology Congress, WTC 2013, 2013)
Influence of V and N on Transformation Behavior and Mechanical Properties of Medium Carbon Forging Steels
(Trans Tech Publications Ltd, Durnten-Zurich, 2010)
The influence of vanadium and nitrogen on microstructure and mechanical properties of medium-carbon steels has been studied by means of metallography and mechanical testing. Vanadium addition to the low nitrogen steel ...
Precipitation of the beta-phase and corrosion behavior of an al-6.8 wt.% mg alloy
(John Wiley & Sons, Chichester, 2012)
This study was performed on the Al-Mg alloy with the chemical composition: Al-Mg6.8-Mn0.51-Fe0.2-Si0.1. As-received cold rolled material (O-temper) was subjected to (i) cold rolling and annealing at 265 degrees C and 320 ...
Preparation and Characterisation of Novel Biodegradable Material Based on Chitosan and Poly(Itaconic Acid) as Adsorbent for Removal of Reactive Orange 16 Dye from Wastewater
(Springer Int Publishing Ag, Cham, 2015)
Environmental protection has been a topic of great interest in recent years. Discharging azo dyes in aquatic systems contaminates water and causes serious ecological problems. Azo dyes are bio-accumulative, and, due to ...
Study of lipase-catalyzed synthesis of ascorbyl oleate using response surface methodology
(6th Central European Congress on Food, CEFood 2012, 2012)
L-ascorbic acid has good antioxidative properties but its efficiency in stabilizing fats and oils in products with high lipid content is negligible due to its hydrophilic characteristics. On the other hand, fatty acid ...