Претраживање
Приказ резултата 3241-3250 од 3271
The potential use of aby-6 starter culture in fermentation of soy based substrates
(Novi Sad : Institute of Food Technology, 2016)
The aim of this study was selection of optimal fermentation parameters (inoculum level and temperature) for production of fermented soy milk based beverage, using starter culture ABY-6 specially designed for yogurt production. ...
The shape of the polarization curve and diagnostic criteria for control of the metal electrodeposition process
(Serbian Chemical Society, 2016)
The simulated shapes of the polarization curves were correlated with the type of metal electrodeposition process control as a function of the ratio of the exchange current density to the limiting diffusion current density ...
Quantification of viable spray-dried Lactobacillus plantarum TA and 7A after two years of storage by using real-time PCR
(6th Central European Congress on Food, CEFood 2012, 2012)
Probiotic are "living microorganisms, which upon ingestion in certain numbers, exert health benefits beyond inherent basic nutrition", and it is recommended that probiotic products contain at least 107 live microorganisms ...
Metal pollution index as a tool for assessing water quality of Boka Kotorska Bay
(Belgrade : Faculty of Agriculture, 2013)
Monitoring of temperature images of objects / Мониторинг температурного изображения объектов
(Odesa : Politekhperiodika, 2018)
In this study, the temperature images of different objects were observed using the IR thermographic camera
and a system of thermosensors connected to the eight-channel system for temperature monitoring based on
the PC ...
Utilization of agro-industrial waste for removal of copper ions from aqueous solutions and mining-wastewater
(Elsevier Science Inc, New York, 2019)
In this study, unmodified lemon peel, as agro-industrial waste, was used to investigate removal efficiency of copper ions from aqueous solutions and mining wastewater. The effects of solution pH, adsorption time, metal ion ...
The influence of the shape and size of the AL2O3 particles on the flexural properties of the PMMA composite modified by the addition of dimethyl itaconate / Uticaj oblika i veličine čestica AL2O3 na savojna svojstva PMMA kompozita modifikovanog dodatkom dimetil itakonata
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Dental materials have specific requirements regarding behavior in exploitation conditions. Poly (methyl methacrylate) (PMMA) is one of the most commonly used prosthetic materials. It is of interest to improve the mechanical ...
New surface characterization tools for alumina based refractory material exposed to cavitation - Image analysis and pattern recognition approach
(Elsevier Science Inc, New York, 2018)
The aim of this study was to examine the influence of cavitation erosion on the morphology of defects formed on the surfaces of alumina-based materials. The alumina-based samples were exposed to cavitation erosion for 42 ...
Influence of the fabrication process of copper matrix composites on cavitation erosion resistance
(Savez inženjera metalurgije Srbije, Beograd, 2017)
Copper matrix composites reinforced with ZrB2 particles were produced in two ways: by hot pressing (HP) and laser-sintering process. Powder mixture Cu-Zr-B was mechanically alloyed before densification processes. Variations ...
Modifikovana nanoceluloza kao nosač za imobilizaciju lipaze iz Candida rugosa / Modified nanocellulose as a support for adsorption of lipase from Candida rugosa
(Beograd : Srpsko hemijsko društvo, 2016)
Sa ubrzanim razvojem nanotehnologije, celuloza kao najrasprostranjeniji i najvažniji prirodni polimer na zemiji privlači sve veću pažnju u formi nanoceluloze. Zbog svoje biodegradabilnosti, biokompatibilnosti i velike ...