Претраживање
Приказ резултата 11-20 од 57
Predicting Low-Modulus Biocompatible Titanium Alloys Using Machine Learning
(MDPI, 2023)
Titanium alloys have been present for decades as the main components for the production of various orthopedic and dental elements. However, modern times require titanium alloys with a low Young’s modulus, and without the ...
Synthesis of Silica Particles Using Ultrasonic Spray Pyrolysis Method
(Metals, 2021)
Silica has sparked strong interest in hydrometallurgy, catalysis, the cement industry, and paper coating. The synthesis of silica particles was performed at 900 degrees C using the ultrasonic spray pyrolysis (USP) method. ...
Effect of the Degree of Conversion on Mechanical Properties and Monomer Elution from Self-, Dual- and Light-Cured Core Composites
(Materials, 2021)
The objective of this work was to measure and correlate the degree of conversion (DC), mechanical properties and monomer elution from self-, dual- and light-cured core composites. Five samples of each of the following ...
Agricultural waste as a source of peroxidase for wastewater treatment: Insight in kinetics and process parameters optimization for anthraquinone dye removal
(Environmental Technology & Innovation, 2021)
The number of different technologies available for colored wastewater treatment shows the vastness of the issue. Finding the most feasible one, yet taking into account the cost, the efficiency and eco-friendliness is like ...
Mucoadhesive Gelatin Buccal Films with Propranolol Hydrochloride: Evaluation of Mechanical, Mucoadhesive, and Biopharmaceutical Properties
(Pharmaceutics, 2021)
This study processes and characterizes propranolol hydrochloride/gelatin mucoadhesive buccal films. Two types of gelatin are used: Gelatin from porcine skin, type A (GA), and gelatin from bovine skin (GB). The influence ...
Morphology, Structure and Mechanical Properties of Copper Coatings Electrodeposited by Pulsating Current (PC) Regime on Si(111)
(MDPI, Basel, 2020)
Copper electrodeposition on (111)-oriented Si substrate was performed by the pulsating current (PC) regime at various average current densities in the range of 15-70 mAcm(-2), obtained by varying either the frequency (30, ...
Selenate Adsorption from Water Using the Hydrous Iron Oxide-Impregnated Hybrid Polymer
(Metals, 2020)
Hybrid adsorbent, based on the cross-linked copolymer impregnated with hydrous iron oxide, was applied for the first time for Se(VI) adsorption from water. The influence of the initial solution pH, selenate concentration ...
Considerations for the design and conduct of human gut microbiota intervention studies relating to foods
(Springer Heidelberg, Heidelberg, 2020)
With the growing appreciation for the influence of the intestinal microbiota on human health, there is increasing motivation to design and refine interventions to promote favorable shifts in the microbiota and their ...
Multipurpose Nonwoven Viscose/Polypropylene Fabrics: Effect of Fabric Characteristics and Humidity Conditions on the Volume Electrical Resistivity and Dielectric Loss Tangent
(Korean Fiber Society, 2020)
In this work, the volume electrical resistivity and dielectric loss tangent of viscose/polypropylene multipurpose nonwoven fabrics were examined. According to the obtained results, the changes in the volume electrical ...
Tableting properties of microcrystalline cellulose obtained from wheat straw measured with a single punch bench top tablet press
(Elsevier B.V., 2020)
The objective of this work was to study the relation between the manufacturing conditions of microcrystalline cellulose (MCC), its physicochemical properties and its tableting behavior. Two different preparation procedures ...