Претраживање
Приказ резултата 61-70 од 224
The influence of zinc surface pretreatment on the adhesion of epoxy coating electrodeposited on hot-dip galvanized steel
(Elsevier Science Sa, Lausanne, 2007)
The adhesion and electrochemical properties of epoxy coatings electrodeposited on hot-dip galvanized steel with and without passive films were investigated during exposure to 3% NaCl. The passive films were formed in hot ...
Deformation behaviour of welded stainless steel: Carbon steel sandwich sheet material / Deformaciono ponašanje zavarenog spoja sendvič lima nerđajući čelik - ugljenični čelik - nerđajući čelik
(Military Technical Institute, Belgrade, 2007)
Formability of welded austenitic stainless steel (321 type) - low carbon steel (1010 type) sandwich sheet material was tested. Gas tungsten arc welding (GTAW) and shield metal arc welding (SMAW) procedures were used. After ...
Stillage as by-product of alcoholic fermentation / Džibra - sekundarni proizvod alkoholne fermentacije
(Univerzitet u Nišu - Tehnološki fakultet, Leskovac, 2007)
Processes of bioethanol production from sugars, starch or cellulose produce enormous amounts of stillage (about 20 dm3 per dm3 ethanol), as a by-product. Chemically, stillage is an aqueous solution of different products ...
Preparation of heterogeneous catalyst for biodiesel synthesis
(2007 AIChE Annual Meeting, 2007)
Certain disadvantages of conventional processes of biodiesel, e.g., fatty acid methyl esters (FAME) synthesis could be avoided by applying new technologies that are based on using heterogeneous catalyst. A new type of ...
Adhesion and corrosion resistance of epoxy primers used in the automotive industry
(Taylor & Francis Ltd, Abingdon, 2007)
One of the most important factors in corrosion prevention by protective coatings is the loss of adhesion of the coating under environmental influence. Thus, adhesion strength is often used when characterizing protective ...
Preparation of heterogeneous catalyst for biodlesel synthesis
(2007 AIChE Annual Meeting, 2007)
Certain disadvantages of conventional processes of biodiesel, i.e. fatty acid methyl esters (FAME) synthesis could be avoided by applying new technologies which are based on using heterogeneous catalyst. In this study a ...
Removal of metal cations from wastewater using recycled wool-based non-woven material / Uklanjanje katjona metala iz otpadne vode netkanim materijalom na bazi vune kao sekundarne sirovine
(Serbian Chemical Society, Belgrade, 2007)
In this study, the effect of low-temperature air plasma, biopolymer chitosan and hydrogen peroxide treatment of recycled wool-based non-woven material on metal cation uptake was investigated. Recycled wool-based material ...
In situ radical polymerization of methyl methacrylate in a solution of surface modified TiO2 and nanoparticles
(Pergamon-Elsevier Science Ltd, Oxford, 2007)
Surface modified TiO2 nanoparticles dissolved in toluene were encapsulated in PMMA by in situ radical polymerization of methyl methacrylate initiated by 2,2'-azobisisobutyronitrile. The surface modification of the TiO2 ...
Size and surface effects on the MRI relaxivity of manganese ferrite nanoparticle contrast agents
(Amer Chemical Soc, Washington, 2007)
Superparamagnetic MnFe2O4 nanocrystals of different sizes were synthesized in high-boiling ether solvent and transferred into water using three different approaches. First, we applied a ligand exchange in order to form a ...
The influence of thermomechanical treatment and chemical composition on recrystallization of Al-Mg alloys
(Savez inženjera metalurgije Srbije, Beograd, 2007)
Recrystallization behaviour of AlMg3, AlMg4.5Mn and AlMg6Mn alloy plates subjected to different thermomechanical treatments (TMTs), has been studied by means of optical microscopy and hardness measurements. Applied two-stage ...