Претраживање
Приказ резултата 31-40 од 60
Adsorption kinetics, equilibrium, and thermodynamics of Cu2+ on pristine and alkali activated steel slag
(Taylor & Francis Inc, Philadelphia, 2020)
Two adsorbents, pristine electric arc furnace slag (EAFS) and alkali activated slag (AAS) were used for Cu2+ removal from aquatic solutions. Batch adsorption tests were conducted at various temperatures and initial Cu2+ ...
Estimation of competitive adsorption isotherms based on nonlinear frequency response experiments using equimolar mixtures-numerical analysis for racemic mixtures
(Pergamon-Elsevier Science Ltd, Oxford, 2013)
The nonlinear frequency response method for estimation of competitive adsorption isotherms, based on analysis of the response of a chromatographic column to sinusoidal perturbation of the inlet concentration, was modified ...
Removal of a Cationic Dye from Aqueous Solution by Microwave Activated Clinoptilolite-Response Surface Methodology Approach
(Springer International Publishing Ag, Cham, 2014)
Natural clinoptilolite from Zlatokop deposit, Serbia, was activated by microwave irradiations (10 min, 550 W) and its adsorptive efficiency for removal of crystal violet (CV) dye from aqueous solution was investigated. The ...
Rapid cationic dye adsorption on polyphenol-extracted coffee grounds-A response surface methodology approach
(Elsevier Science Bv, Amsterdam, 2014)
The Box-Behnken design under the response surface methodology (RSM) with five interacting parameters (adsorbent dose, initial dye concentration, time of agitation, initial solution pH and time of the adsorbent microwave ...
Removal of magnesium in spring water using the natural zeolite in a continuous flow system / Uklanjanje magnezijuma iz izvorske vode pomoću prirodnog zeolita u protočnom sistemu
(Association of Chemical Engineers of Serbia, 2014)
The aim of this work is an investigation of the possible application of Serbian natural zeolitic tuff ('Igroš Vidojević' deposit, Brus, Serbia) for improvement of the spring water quality. The concentration of magnesium ...
Alumina Particles Doped With Ferric as Efficient Adsorbent for Removal of Reactive Orange 16 from Aqueous Solutions
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2018)
Ferric oxide doped alumina particles were prepared via the sol-gel method and their performance as Reactive Orange 16 adsorbent was evaluated. The concentrations of the Reactive Orange 16 were monitored using a UV-Vis ...
Efficient As(V) removal by alpha-FeOOH and alpha-FeOOH/alpha-MnO2 embedded PEG-6-arm functionalized multiwall carbon nanotubes
(Inst Chemical Engineers, Rugby, 2017)
A novel adsorbents, 6-arm amino polyethylene glycol functionalized multiwall carbon nanotubes (PEG/MWCNT) loaded with alpha-FeOOH (Fe/PEG/MWCNT), and hybrid alpha-FeOOH/alpha-MnO2 nano-deposit (Fe-Mn/PEG/MWCNT) were used ...
Modification of multi-wall carbon nanotubes for the removal of cadmium, lead and arsenic from wastewater
(Inst Materials Physics, Bucharest, 2013)
Multi-wall carbon nanotubes (MWCNTs) was functionalized with 6-arm amino polyethylene glycol (PEG), and synthesized PEG-MWCNTs was used as adsorbent in order to study adsorption characteristics with respect to Cd(II), ...
Arsenic removal by copper-impregnated natural mineral tufa part II: a kinetics and column adsorption study
(Springer Heidelberg, Heidelberg, 2019)
This batch and column kinetics study of arsenic removal utilized copper-impregnated natural mineral tufa (T-Cu(A-C)) under three ranges of particle size. Non-competitive kinetic data fitted by the Weber-Morris model and ...
Removal of the As(V) and Cr(VI) from the Water Using Magnetite/3D-Printed Wollastonite Hybrid Adsorbent
(International Institute for the Science of Sintering (IISS), 2022)
In this study, the structure, morphology and composition of the synthesized magnetite/3D-printed wollastonite (3D_W/M) composite were characterized, and its adsorption performance with respect to As(V) and Cr(VI) were ...