Search
Now showing items 61-70 of 99
Challenges in bioethanol production: utilization of cotton fabrics as a feedstock
(Savez hemijskih inženjera, Beograd, 2016)
Bioethanol as a dean and renewable fuel with its major environmental benefits, represents a promising biofuel today which is mostly used in combination with gasoline. It can be produced from different kinds of renewable ...
A comparative study of the removal of lead, cadmium and zinc ions from aqueous solutions by natural and Fe(III)-modified zeolite / Uporedna analiza uklanjanja jona olova, kadmijuma i cinka iz vodenih rastvora adsorpcijom na prirodnom i Fe(III)- modifikovanom zeolitu
(Association of the Chemical Engineers of Serbia, 2014)
The main purpose of this research was to explain the differences in the adsorption mechanisms and adsorption capacities of natural and Fe(III)-modified zeolite for Pb2+, Zn2+ and Cd2+. The adsorbents were characterized ...
The effect of salinity on the sorption of cadmium ions from aqueous medium on Fe(III)-sepiolite / Uticaj saliniteta vode na sorpciju jona kadmijuma na Fe(III)-sepiolitu
(Association of the Chemical Engineers of Serbia, 2015)
In this study, the sorption of cadmium ions onto sepiolite modified with hydrated iron(III) oxide, Fe(III)-sepiolite, has been investigated in natural seawater, artificial seawater, aqueous solution of NaCl of the same ...
Investigation of forced and total degradation products of amlodipine besylate by liquid chromatography and liquid chromatography-mass spectrometry / Ispitivanje degradacionih proizvoda amlodipin-bezilata primenom tečne hromatografije i tečne hromatografije-masene spektrometrije u uslovima forsirane i potpune degradacije
(Association of the Chemical Engineers of Serbia, 2014)
An isocratic, reversed-phase liquid chromatographic method was applied for the investigation of the degradation products of amlodipine besylate under stressed conditions in solution. Amlodipine besylate stock solutions ...
Stress corrosion cracking resistance of aluminum alloy 7000 series after two-step aging / Otpornost aluminijumske legure serije 7000 prema naponskoj koroziji posle dvostepenog termičkog taloženja
(Association of the Chemical Engineers of Serbia, 2015)
The effect of one-step and a new (short) two-step aging process on the resistance to stress corrosion cracking of an aluminum alloy 7000 series was investigated, using slow strain rate test and fracture mechanics method. ...
Targeting heat recovery and reuse in industrial zone
(Savez hemijskih inženjera, Beograd, 2017)
In order to reduce the usage of fossil fuels in industrial sectors by meeting the requirements of production processes, new heat integration and heat recovery approaches are developed. The goal of this study is to develop ...
Comparison of cubic-plus-association and soave-redlich-kwong equations of state for prediction of vapor-liquid equilibrium of fischer-tropsch reaction mixture
(Savez hemijskih inženjera, Beograd, 2019)
Predictions of vapor liquid equilibrium for Fischer-Tropsch mixtures were com-pared using the classical Soave-Redlich-Kwong (SRK) and cubic-plus-asso-ciation (CPA) equations of state. The performance of the two equations ...
High temperature transesterification of soybean oil with methanol using manganese carbonate as catalyst
(Savez hemijskih inženjera, Beograd, 2018)
The manganese carbonate catalyst, prepared by precipitation method, was used in transesterification of soybean oil under subcritical condition of methanol. Catalyst samples were characterized by X-ray diffraction (XRD), ...
Cfd analysis and flow model reduction for surfactant production in helix reactor
(Savez hemijskih inženjera, Beograd, 2015)
Flow pattern analysis in a spiral Helix reactor is conducted, for the application in commercial surfactant production. Step change response curves (SCR) were obtained from numerical tracer experiments by three-dimensional ...
Influence of some sol-gel synthesis parameters of mesoporous tio2 on photocatalytic degradation of pollutants
(Savez hemijskih inženjera, Beograd, 2016)
Titanium dioxide (TiO2) nanopowders were produced by sol-gel technique from tetrabutyl titanate as a precursor by varying some parameters of the sol-gel synthesis, such as temperature (500 and 550 degrees C) and the duration ...