Претраживање
Приказ резултата 1-10 од 15
Influence of different iron powders on the friction properties of sintered friction materials based on iron
(Elsevier Science B.V., 2000)
The possibility of using iron powders of different morphological, chemical and physical properties as the bases of the metal matrix of the friction layer in sintered friction materials for dry friction under severe braking ...
Kinetics and mechanism of the reaction of substituted 4-pyrimidine carboxylic acids with diazodiphenylmethane in dimethylformamide
(Scientific Reviews Ltd., 2000)
Correlation of the data for the reaction of 11 substituted 4-pyrimidine carboxylic acids with diazodiphenylmethane (DDM) in dimethylformamide (DMF) with calculated atomic charges on the carboxylic group showed that the ...
The kinetics of the thermal degradation of isomeric dipropyl and dibutyl esters of poly(itaconic acid)
(Pergamon-Elsevier Science Ltd, Oxford, 2000)
Non-oxidative and oxidative thermogravimetry was performed on poly(di-n-propyl-) (PDnPI), poly(di-iso-propyl-) (PDiPI), poly(di-n-butyl-) (PDnBI), poly(di-iso-butyl-) (PDiBI) and poly(di-sec-butyl itaconate) (PDsBI). The ...
Experimental study of zinc morphology in alkaline electrolyte at low direct and pulsating overpotentials
(Elsevier Sequoia SA, 2000)
A possible mechanism of the formation of spongy zinc electrodeposits is considered. The confirmation of the proposed semiquantitative mathematical model is performed in zinc electrodeposition onto copper wire from a 0.1 M ...
Kinetic analysis of hydrogen evolution at Ni-Mo alloy electrodes
(Elsevier Science Ltd, 2000)
The hydrogen evolution reaction (HER) on Ni, Mo and MoNi intermetallic compound was investigated with ac impedance and dc polarization measurements in 1.0 mol dm-3 NaOH solution at 25 °C. The rate constants of the forward ...
Contribution to study of processes on the steel cast-sand mould contact surface during casting
(Elsevier Science B.V., 2000)
The testings involved in this paper were part of a comprehensive research project conducted to find out what complex processes were taking place at metal-mould contact surface. These investigations are of particular ...
The influence of the aging time of RuO2 and TiO2 sols on the electrochemical properties and behavior for the chlorine evolution reaction of activated titanium anodes obtained by the sol-gel procedure
(Elsevier, 2000)
The influence of the aging time of RuO2 and TiO2 sols used for the preparation of (40% RuO2+60% TiO2)/Ti anodes by the sol-gel procedure on the electrochemical properties and behavior for the chlorine evolution reaction ...
Modeling boron separation from water by activated carbon, impregnated and unimpregnated
(Roma : Società chimica italiana, 2000)
The sorption of boron from boric acid water solution by impregnated activated carbon has been studied Barium, calcium, mannitol, tartaric acid and citric acid were used as chemical active materials. All processes were ...
Stress field analysis in composite laminates with embedded optical fiber
(Trans Tech Publications Ltd, Durnten-Zurich, 2000)
A typical intensity-modulated optical fiber sensor system consists of a light source, a sensing device, within which the intensity of light is altered by the measurand in some way, a detector to measure the intensity of ...
Estimate of Si3N4 diffusion into Cu based filler metal
(Elsevier Science Ltd, 2000)
The diffusion phenomena occurring at the boundary between Si3N4 and active Cu based filler metal during Si3Nn/metal joining are discussed as a part of the general theory of reaction layer growth. The mechanism of reaction ...