Search
Now showing items 151-160 of 178
Bisphenol a removal from aqueous solution using fine alpha-fe2o3 particles
(Savez inženjera metalurgije Srbije, Beograd, 2018)
Iron(III) oxide particles (alpha-Fe2O3) were obtained from ferrous chloride (FeCl3 center dot 6H(2)O) precursor using ammonium hydroxide as a precipitating agent and particles were calcined at 700 degrees C for 4 h. ...
Synthesis of nife2o4 nanofibers by joint sol-gel and electrospinning technique
(Savez inženjera metalurgije Srbije, Beograd, 2018)
In this study, electrospinning combined with sol-gel technique is applied in order to produce magnetic nickel ferrite (Ni-ferrite) nanofibers. The prepared Ni-ferrite gel was mixed with poly(vinylpyrrolidone) (PVP) solution ...
Modelling of Dyeing of Modified Polyester at Lower Temperature by Ultrasound
(University of Ljubljani, Fac Natural Sci & Engineering, Dept Textiles, Ljubljana, 2018)
This article discusses the process of polyester dyeing through the modelling process, i.e. the ability of adsorption of dyes for chemically modified polyester fibres of knitted fabrics in aqueous environment in the presence ...
Polyaniline based corrosion inhibitors for conventional organic coatings / Primena polianilina kao inhibitora korozije klasičnih organskih prevlaka
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Corrosion protection using conventional coatings is the most used method. Application of polyaniline (PANI) as an inhibitor in conventional coating is based on its proven and well examined protective nature, with motivation ...
The effect of friction stirs welding speed on microstructure, mechanical properties and IGC of EN AW-5083 plates
(Advanced Technologies and Materials, 2019)
The aim of this work was to evaluate the influence of welding speed on microstructure, mechanical properties, as well as Intergranular corrosion (IGC) susceptibility of EN AW-5083 alloy welded using FSW. FSW was performed ...
The influence of Mg and Mn content on abnormal grain growth in AA5182 type alloys
(Savez inženjera metalurgije Srbije, Beograd, 2019)
The occurrence of abnormal grain growth (AGG) in AA5182 alloy during annealing imposes severe restrictions on processing parameters and deteriorates mechanical properties. In this work, we investigated the effect of chemical ...
Micromalting of triticale varieties NS Paun and Odisej
(Faculty of Technology, Novi Sad, 2018)
The objective of this study was to evaluate the possibility of application of two triticale varieties, NS Paun and Odisej, as partial substitutes for barley malt in wort production, based on the triticale analyses, ...
Microstructure evolution of the hot-rolled modified AA 5083 alloys during the two stage thermal treatment
(Savez inženjera metalurgije Srbije, Beograd, 2011)
The effects of the two stage heat treatment on the structure of two hot-rolled 5083 aluminum alloys without and with 0.12% Zr addition were investigated. Combination of the metallographic and transmission electron microscopy ...
Determination of the coffin-manson equation under low-cycle fatigue conditions
(Structural Integrity and Life-Integritet I Vek Konstrukcija, 2021)
The cycle loading of a material results in the modification of its properties and so in this paper is presented the behaviour of the fatigue life using low-cycle fatigue parameters. By applying the Coffin-Manson equation ...
Recyclability of technology metals from E-waste: Case study of in and Ga recovery from magnetic fraction
(Association of Metallurgical Engineers of Serbia, 2019)
This study presents the results of the theoretical assessment and a preliminary experimental investigation of technology metals (TM) recovery from magnetic fraction obtained after mechanical treatment of waste printed ...