Претраживање
Приказ резултата 11-18 од 18
The influence of the deposition parameters on the porosity of thin alumina films on steel / Uticaj parametara elektroforetskog taloženja praha aluminijum-oksida iz vodenih suspenzija na poroznost dobijenih tankih filmova na čeliku
(Serbian Chemical Society, Belgrade, 2004)
The influence of the deposition parameters on the porosity of thin alumina films electrophoretically deposited on steel from aqueous suspensions was investigated. The effects of the applied voltage, deposition time, ...
Influence of formation conditions and precursor viscosity on mean fiber diameter formed using the relating disk method
(Elsevier, Amsterdam, 2000)
Alumina ceramic fibers were produced from aluminum-hydroxidechloride based sol. Polyvinyl alcohol and surface active material were applied to adjust the rheological characteristics of the: sol. The rotating disk formation ...
The use of image analysis program for the determination of surface deterioration of refractory specimen during thermal shock / Korišćenje programa za analizu slike za određivanje stepena oštećenja vatrostalnog uzorka pri termošoku
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd, 2006)
During examination of refractory specimen, one of the most important characteristics is their resistance to thermal shock. Standard method of testing is based on monitoring the surface shanging during thermal stability ...
Electrophoretic deposition of thin alumina films from water suspension
(Elsevier, Amsterdam, 2002)
Alumina water suspensions have been prepared for thin alumina film deposition on steel. The type and quantity of deflocculant have been determined using zeta potential and viscosimetric measurements. The deposition was ...
A fracture mechanics approach to thermal shock investigation in alumina-based refractory
(9th International Conference on Multiscale and Functionally Graded Materials, FGM IX, 2008)
The thermal shock behavior of large grain size, alumina-based refractories was investigated experimentally using a standard water quench test. A mathematical model was employed to simulate the thermal stability behavior. ...
Thermal stability of cordierite/silicon carbide composites after cyclic thermal shock
(Natl Inst Optoelectronics, Bucharest-Magurele, 2008)
In this paper composite material made from silicium carbide and cordierite was used in experiments. Behavior of the material in conditions of rapid temperature changes was investigated. Modified water quench test was applied ...
Microstructural dependence of fracture toughness in high-strength 7000 forging alloys
(Pergamon-Elsevier Science Ltd, Oxford, 2008)
The effects of microstructural parameters associated with the coarse intermetallic phases particles and precipitates on the fracture toughness of the overaged 7000 alloy forgings are investigated. Detailed microstructural ...
The influences of multiscale-sized second-phase particles on fracture behaviour of overaged 7000 alloys
(Procedia Engineering, 2009)
To identify the most important parameters of multiscale microstructural features influencing the fracture modes and resistance to damage, detailed microstructural and fractographic analysis of overaged 7000 alloy plates ...