Претраживање
Приказ резултата 21-30 од 135
Analysis of copper losses throughout weak acid effluent flows generated during off-gas treatment in the new copper smelter RTB Bor
(Association of Metallurgical Engineers of Serbia, 2013)
The previous inadequate treatment of off-gas in RTB Bor in Serbia has resulted in serious pollution of the environment and the possibly high losses of copper through the effluent flows. The project of New Copper Smelter ...
Contamination of cakes with toxigenic molds / Kontaminacija poslastičarskih proizvoda toksigenim plesnima
(Matica Srpska, 2013)
The total number of molds in cakes ranged up to 9.0 x 102 CFU/g. The highest number of molds was isolated on Dichloran 18% Glycerol Agar (DG18), and the lowest on Malt Yeast Extract 50% Glucose Agar (MY50G). Mycopopulation ...
Determination of fatigue crack growth parameters in welded joint of HSLA steel / Određivanje parametara zamornog rasta prsline kod zavarenih spojeva od HSLA čelika
(Society for Structural Integrity and Life, Institute for Material Testing, 2011)
The structural integrity and operational safety of welded pressure vessels primarily depends on the behaviour of weldments. In spite of all efforts in material production and improvements in welding techniques, including ...
Application of controlled release glass in the production of French marigold (Tagetes patula L.) / Primena stakla sa kontrolisanim otpuštanjem hranljivih elemenata u proizvodnji rasada kadifice (Tagetes patula L.)
(Institute of field and vegetable crops, Novi Sad, 2012)
This paper investigates the possibility and justification of controlled release glass application as a new ecological material in the production of plants-seedlings of French marigold (Tagetes patula L.). During the ...
Evaluation of the residue of lactic acid fermentation on stillage as an animal feed / Ispitivanje kvaliteta džibre nakon mlečno-kiselinske fermentacije kao hrane za životinje
(Nacionalno društvo za procesnu tehniku i energetiku u poljoprivredi, Novi Sad, 2013)
Lactic acid is a significant chemical for the food industry. Fermentative lactic acid production on wastes could significantly improve the economy and sustainability of the process. In this study, lactic acid production ...
Simultaneous crystallization testing in a crucible furnace
(University of Kragujevac, Faculty of Science, 2012)
An air-cooled test tube, with a series of modular and movable rings (cylindrical-multilateral, folding-matryoshka 'crystallization comb-key'), installed in a laboratory crucible furnace is presented. The setup allows easy ...
Inhibitory activity of the onion essential oil on growth Cladosporium cladosporioides, Emericella nidulans, and Eurotium spp. / Inhibitorska aktivnost etarskog ulja crnog luka na rast Cladosporium cladosporioides, Emericella nidulans, i Eurotium spp.
(Nacionalno društvo za procesnu tehniku i energetiku u poljoprivredi, Novi Sad, 2013)
This study was aimed at investigating the antifungal potential of onion (Allium cepa L. cultivar Kupusinski jabučar) essential oil against Cladosporium cladosporioides, Emericella nidulans, and Eurotium spp. isolated from ...
Dynamic mechanical properties of aramid fabrics impregnated with carbon nanotube/poly (vinyl butyral)/ethanol solution
(Association of Metallurgical Engineers of Serbia, 2013)
In this study six samples of polyurethane/p-aramid multiaxial fabric forms (Colon fabrics) were coated with 10 wt.% poly (vinyl butyral) (PVB)/ethanol solution with the addition of multiwalled carbon nanotubes (MWCNT). The ...
Avoidance of tunnel type defect in FSW welded Al 5052-H32 plates / Eliminacija tunela pri zavarivanju trenjem alatom legure Al 5052-H32
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2012)
Some experiences in elimination of tunnel type defect Friction Stir Welding of Al alloy 5052-H32 are presented in this paper. In order to evaluate the influence of the processing parameter (ratio between rotation and ...
Secondary measures for reduction of NOx emission in glass melting process / Sekundarni postupci smanjenja emisije oksida azota u procesu topljenja stakla
(Savez inženjera i tehničara Srbije, Beograd, 2012)
In this paper the new methods for reduction of NOx emission from glass melting furnaces were presented. The secondary measures are focused on development of different methods for elimination of nitrogen oxide from the smoke ...