Претраживање
Приказ резултата 41-50 од 174
Influence of technological development on encouraging innovativeness of domestic industrial enterprises / Uticaj tehnološkog razvoja na podsticanje inovativnosti domaćih industrijskih preduzeća
(Savez ekonomista Srbije, Beograd, 2016)
Technology and technological development are the key factors of contemporary socio-economic development, and the application of the latest technological achievements is the developed countries' most powerful means of ...
Some aspects of physical metallurgy of microalloyed steels
(Savez inženjera metalurgije Srbije, Beograd, 2019)
Some aspects of deformation, precipitation, and recrystallization behavior in medium carbon V-microalloyed and low carbon Nb/Ti-microalloyed steels are presented in the paper. Changes in microstructure are explained together ...
Integrity assessment of reverse engineered ti-6al-4v eli total hip replacement implant
(Society for Structural Integrity and Life, Institute for Material Testing, 2019)
Total hip replacement implants are used as an artificial replacement for disfunctional hips in order to sustain joint movement. Chosen material and design of total hip replacement are the most influential factors for ...
Solvatochromism of 5-(4-substituted arylazo)-4-phenyl-6-methyl-3-cyano-2-pyridones / Solvatohromizam 5-(4-supstituisanih arilazo)-4-fenil-6-metil-3-cijano-2-piridona
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Eight 5-(4-substituted arylazo)-4-phenyl-6-methyl-3-cyano-2-pyridones were synthesized by reaction of benzoylacetone and arendiazonium salt, followed by condensation with cyanoacetamide. Absorption spectra of all azo ...
Integrated procedure for recycling and valorization of useful components from secondary raw materials based on hard metals
(Savez inženjera metalurgije Srbije, Beograd, 2017)
Wide application of hard metals requires increased consumption of their constituents. Their high cost and scarcity impose the need for finding new, both ecologically and economically justified ways for their production. ...
Ni-pd/al(2)o(3) catalyst supported on reticulated ceramic foam for dry methane reforming
(Savez inženjera metalurgije Srbije, Beograd, 2015)
In the present study, Ni-Pd/Al2O3 catalyst supported on alpha-Al2O3 based foam was prepared and evaluated in the dry methane reforming process. Corresponding metal chlorides were deposited to the foam surface by impregnation ...
PtAu catalyst with enhanced activity for formic acid oxidation / PtAu katalizator sa poboljšanom aktivnošću za reakciju oksidacije mravlje kiseline
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
PtAu systems are recognized as good catalysts for the oxidation of formic acid electrooxidation, which is investigated as a possible anodic reaction in low-temperature fuel cells. In this research, bimetallic PtAu ...
Hardness and assessment of adhesion of monolayer and multilayer nickel thin films electrochemically deposited on silicon substrates with and without the ultrasonic agitation / Tvrdoća i procena adhezije jednoslojnih i višeslojnih tankih filmova nikla elektrohemijski deponovanih na silicijumskim podlogama sa i bez ultrazvučnog mešanja
(Academy of Criminalistic and Police Studies, Belgrade, 2019)
Composite systems of monolayer and multilayer nickel films electrochemically deposited on single crystal (100)-oriented silicon wafers were fabricated with and without the ultrasonic agitation. The hardness and adhesion ...
Obtaining and characterization of multilayer nickel thin films electrodeposited with the assistance of ultrasonic agitation / Dobijanje i karakterizacija višeslojnih tankih filmova nikla elektrodeponovanih uz pomoć ultrazvučnog mešanja
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Multilayer composite structures of electrodeposited Ni films on polycrystalline copper substrates were fabricated with the assistance of ultrasonic agitation. Alternate ordinary and ultrasonicassisted electrodeposition of ...
Treatment of dispersed iron-bearing raw materials and modeling of the protection systems against air-pollution
(Association of Metallurgical Engineers of Serbia, 2016)
Based on the analysis of the non-standard iron-bearing raw materials treatment process and the results of real composition measurements of the flue gas, the study of hazards by identification of harmful substances that ...