Претраживање
Приказ резултата 11-16 од 16
Adsorption and corrosion inhibitive properties of some organic molecules on iron electrode in sulfuric acid
(Elsevier, 2002)
Adsorption and corrosion inhibitive properties of three different organic molecules: 2-naphthalenesulfonic acid, 2,7-naphthalenedisulfonic acid and 2-naphthol-3,6-disulfonic acid are investigated on Armco-iron electrode ...
Composition and processing effects on the electrochemical characteristics of biomedical titanium alloys
(Pergamon-Elsevier Science Ltd, Oxford, 2014)
The electrochemical behaviour of the Ti-13Nb-13Zr and Ti-6Al-4V ELI alloys with martensitic microstructures was investigated by polarization and electrochemical impedance spectroscopy (EIS) in Ringer's solution. The impedance ...
The effect of T4 heat treatment on the microstructure and corrosion behaviour of Zn27Al1.5Cu0.02Mg alloy
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
The effect of heat treatment on the microstructure and corrosion behaviour of Zn27Al1 5CuO 02Mg alloy was examined The alloy was prepared by melting and casting route and then thermally processed (T4 regime) Corrosion ...
Oxygen reduction on a duplex stainless steel
(Pergamon-Elsevier Science Ltd, Oxford, 1998)
O-2 reduction on duplex stainless steel was investigated in neutral and alkaline solutions with and without the presence of chloride ions. All polarization curves showed hysteresis with higher reaction rate in positive ...
Determination of the protective properties of electrodeposited organic epoxy coatings on aluminium and modified aluminium surfaces
(Pergamon-Elsevier Science Ltd, Oxford, 2005)
The electrochemical and transport properties and thermal stability of epoxy coatings electrodeposited on aluminium and modified aluminium surfaces (anodized, phosphatized and chromatized-phosphatized aluminium) have been ...
Electrochemical testing of noble metal dental alloys: The influence of their chemical composition on the corrosion resistance
(Corrosion Science, 2021)
Platinum and nine commercial dental alloys with the contents of noble metals ranging from 27 wt.% to 97.6 wt. % were investigated by the procedure described in the Standard ISO 10271:2009, Electrochemical testing was ...