Pretraživanje
Prikaz rezultata 1-10 od 67
Black Pine (Pinus nigra) Essential Oil as a Green Corrosion Inhibitor for Carbon Steel
(MDPI, 2023)
In this work, the essential oil of black pine (Pinus nigra J. F. Arnold) was used for the first time as a natural, ecological, and sustainable corrosion inhibitor for the acid cleaning of carbon steel. The essential oil ...
Effect of alumina coatings on corrosion behavior of X10CrAlSi7 steel in sulfuric acid
(Belgrade : Association of Metallurgical Engineers of Serbia (AMES), 2019)
The results of experimental studies of the effect of the plasma sprayed alumina coating on the improved corrosion resistance of the heat-resistant ferritic
stainless steel (W.Nr. 1.4713, EN X10CrAlSi7) in the sulfuric ...
Electrochemistry towards excellence (ISE 2020): Foreword
(Elsevier, 2022)
In spite of the long tradition that electrochemical science hashad in the Republic of Serbia, the 71st Annual Meeting (AM) of theInternational Society of Electrochemistry (ISE) was the first timeSerbia was supposed to be ...
Analysis of metal ion release from biomedical implants
(Association of Metallurgical Engineers of Serbia, 2013)
Metallic biomaterials are commonly used for fixation or replacement of damaged bones in the human body due to their good combination of mechanical properties. The disadvantage of metals as implant materials is their ...
Electrochemical synthesis and corrosion behavior of thin polyaniline film on mild steel, copper and aluminum
(Belgrade : Association of the Chemical Engineers of Serbia, 2011)
The electrochemical synthesis of polyaniline (PANI) on mild steel, aluminum and copper from the sodium benzoate solutions has been investigated. It has been shown that thin, highly adherent, polyaniline films on the ...
The acid resistance and corrosion stability of polyester coatings on phosphatized steel
(Serbian Chemical Society, Belgrade, 1998)
Protective polyester coatings on phosphatized steel were obtained with different combinations of diols (2-butyl-2-ethyl-1,3-propanediol or 2,2-dimethyl-1,3-propanediol), organic acids (1,3-cyclohexanedicarboxylic acid, ...
Precipitation of the beta-phase and corrosion behavior of an al-6.8 wt.% mg alloy
(John Wiley & Sons, Chichester, 2012)
This study was performed on the Al-Mg alloy with the chemical composition: Al-Mg6.8-Mn0.51-Fe0.2-Si0.1. As-received cold rolled material (O-temper) was subjected to (i) cold rolling and annealing at 265 degrees C and 320 ...
Corrosion behaviour of epoxy coatings investigated by EIS
(Trans Tech Publications Ltd, Durnten-Zurich, 1998)
Epoxy coatings were formed by cathodic electrodeposition of an epoxy resin on steel and on electrochemically modified steel surface by Fe-P alloy using constant voltage method (resin concentration 10 wt.%, temperature 26 ...
Electrochemical deposition and characterization of zinc-nickel alloys deposited by direct and reverse current / Elektrohemijsko taloženje i karakterizacija legura cink-nikal dobijenih konstantnom i reversnom strujom
(Serbian Chemical Society, Belgrade, 2005)
Zn-Ni alloys electrochemically deposited on steel under various deposition conditions were investigated. The alloys were deposited on a rotating disc electrode and on a steel panel from chloride solutions by direct and ...
The influence of zinc surface pretreatment on the adhesion of epoxy coating electrodeposited on hot-dip galvanized steel
(Elsevier Science Sa, Lausanne, 2007)
The adhesion and electrochemical properties of epoxy coatings electrodeposited on hot-dip galvanized steel with and without passive films were investigated during exposure to 3% NaCl. The passive films were formed in hot ...