Pretraživanje
Prikaz rezultata 1-10 od 53
Influence of different iron powders on the friction properties of sintered friction materials based on iron
(Elsevier Science B.V., 2000)
The possibility of using iron powders of different morphological, chemical and physical properties as the bases of the metal matrix of the friction layer in sintered friction materials for dry friction under severe braking ...
Study of chlorination of nickel silicate by gaseous chlorine and calcium chloride in the presence of active additives
(Wiley, Hoboken, 2000)
The paper presents a thermodynamic analysis and experimental research on the kinetics of the chlorination of nickel silicate (2NiO x SiO2) by gaseous chlorine and calcium chloride without additives and in the presence of ...
Deformation pattern and strain hardening in a highly textured 8090 Al-Li alloy sheet
(Elsevier Science Sa, Lausanne, 2000)
Structure-deformation pattern analysis was made on a highly textured 8090 AI-Li alloy sheet deformed in tension. It is shown that the sharp beta-fiber type crystallographic texture induces a strong orientation variation ...
Physical-mechanical phenomenon of woven and non-conventional materials
(Emerald Group Publishing Limited, Bradford, 2000)
The basic idea of this project is in developing series of methods for monitoring structural parameters, as well as establishing their relation with the behaviour of woven and non-woven materials. Establishing the connection ...
Approach to laminar phenomena occurring on external and internal surfaces of solid specimens
(Kluwer Academic Publishers, 2000)
This article presents a general mathematical model for describing the laminar transport phenomena during homogeneous/heterogeneous appearances in the neighborhood of external and internal surfaces of small solid specimens. ...
Thermal investigation of two FePO materials prepared in the presence of 1,2-diaminoethane
(Elsevier, Amsterdam, 2000)
Two porous iron phosphates were synthesized hydrothermaly from a reaction mixture of FeCl3:H3PO4:1,2-diaminoethane:H2O in the molar ratio 1:3:5:70. The chemical formulas indicate difference only in water content; however, ...
Hermal shock behavior of Alumina based refractories: Korrelation between damage resistance parameters and water fcuench test
(Techna Srl, Faenza, 2000)
Klaterials were five alumina based commercial refractories with different content of (AI2O3 +TiO2) from 28% to 78%.The thermal and mechanBl properties of these materials were measured using standard laboratory procedure.Thermal ...
Gas chromatographic retention indices for the N-methyl-N-substituted benzamides on capillary columns
(Natl Inst Science Communication, New Delhi, 2000)
Gas chromatographic retention indices (1) for series of 20 synthesized N-methyl-N-substituted benzamides on DB-I, DB-5 and DB-WAX capillary columns isothermal at 170, 190 and 210 degreesC, and using temperature programmed ...
Thermal shock behavior of alumina based refractories: correlation between damage resistance parameters and water quench test
(Techna Srl, Faenza, 2000)
Materials were five alumina based commercial refractories with different content of (Al2O3 + TiO2) from 28% to 78%.The thermal and mechanical properties of these materials were measured using standard laboratory procedure. ...
Thermal investigations of CoAPO materials prepared by using piperidine as a structure-directing agent
(Elsevier, Amsterdam, 2000)
Two CoAPO materials (CoAPO-34 and CoAPO-20) with relatively high Co2+/Al3+ substitution level were synthesised in either fluoride-free or fluoride-containing reaction mixture using piperidine as a structure-directing agent. ...