Претраживање
Приказ резултата 1-10 од 20
Particle characterization of polydisperse quartz filtration sand
(Elsevier Science Bv, Amsterdam, 2014)
In this paper, different methods for particle characterization were applied to 16 polydisperse fractions of quartz filtration sand obtained by sieving, with sieve diameters in the interval d(m) = 0359 to 2.415. For each ...
Prediction of bed expansion of polydisperse quartz sand mixtures fluidized with water
(Elsevier Science Bv, Amsterdam, 2016)
In this paper, the minimum fluidization velocity and bed expansion of polydisperse sand mixtures fluidized with water were investigated. The fluidization experiments were carried out using 19 different fractions of quartz ...
Analogy between momentum and heat transfer in liquid-solid fluidized beds
(Elsevier Science Bv, Amsterdam, 2015)
Wall-to-bed heat transfer in particulate fluidized beds of spherical particles was studied. Experiments were performed using spherical glass particles of 0.80-2.98 mm in diameter with water in a 25.4 mm I.D. copper tube ...
Mass transfer and concentration boundary layer in a particulate fluidized bed
(Elsevier Science Bv, Amsterdam, 2016)
The aim of this study was to analyze the concentration boundary layer for a comprehensive description of the mass transfer in systems with fluidized particles. Mass transfer from the wall of the column to the fluid in the ...
Hydrodynamic modeling of downward gas-solids flow. Part I: Counter-current flow
(Elsevier, Amsterdam, 2014)
The one-dimensional model of accelerating turbulent downward counter-current gas-solids flow of coarse particles was formulated and experimentally verified by measuring the pressure distribution along the transport tube. ...
Tailoring of magnetite powder properties for enhanced phosphate removal: Effect of PEG addition in the synthesis process
(Elsevier Science Bv, Amsterdam, 2016)
This study demonstrates that PEG-assisted hydrothermal synthesis provides a convenient and eco-friendly route to fabrication of mesoporous magnetite with enhanced capacity for phosphate removal, excellent potential for ...
Properties of quenched LiFePO4/C powder obtained via cellulose matrix-assisted method
(Powder Technology, 2013)
In this study, nanocrystalline LiFePO4/C composite powder has been synthesized via a cellulose matrix-assisted method. In an experiment conducted under extreme conditions involving rapid heating, short high-temperature ...
Prediction of the choking velocity and voidage in vertical pneumatic conveying of coarse particles
(Elsevier, 2006)
A method for predicting the choking velocity and voidage in vertical pneumatic conveying of coarse particles is developed and verified using the data obtained in this study as well as the data of Capes and Nakamura [C.E. ...
Prediction of single particle settling velocities through liquid fluidized beds
(Powder Technology, 2009)
Single particle settling velocities through water fluidized beds of mono-sized glass spheres (dp = 0.645, 1.20, 1.94, 2.98 and 5 mm in diameter) were studied experimentally using a column, 40 mm in diameter. The settling ...
Morphologies of electrochemically formed copper powder particles and their dependence on the quantity of evolved hydrogen
(Elsevier Science Sa, Lausanne, 2008)
Copper powder particles formed by electrolysis under different quantities of evolved hydrogen were analyzed using the scanning electron microscopy (SEM) technique. It was found that the structure of the powder particles ...