Search
Now showing items 1-10 of 32
Complex sulphide-barite ore leaching in ferric chloride solution
(Association of Metallurgical Engineers of Serbia, 2016)
The results of research on the leaching process of complex sulphide-barite ore were presented in this paper. The leaching process was carried out in a laboratory autoclave by ferric chloride solution. Considering that those ...
The morphology of ductile cast iron surface damaged by cavitation
(Association of Metallurgical Engineers of Serbia, 2012)
The study was designed to investigate the cavitation behavior of the ductile cast iron with microstructure consisting of spheroidal graphite in a predominantly ferrite matrix with 10% pearlite. The experiments were conducted ...
The inhibitive effect of ethanolamine on corrosion behavior of aluminium in NaCl solution saturated with CO2
(Association of Metallurgical Engineers of Serbia, 2012)
In this study, the inhibitive effect of ethanolamine on corrosion behavior of aluminium was investigated in 3 wt. % NaCl solution, saturated with CO2. All the experiments were carried out at 20°C. Ethanolamine was added ...
Conceptual design for treatment of mining and metallurgical wastewaters which contains arsenic and antimony
(Association of Metallurgical Engineers of Serbia, 2012)
This paper presents a preliminary design for treatment of mining and metallurgical wastewaters (MMW) from the basin of antimony 'Zajača', which contains high concentrations of arsenic and antimony. MMW have been investigated ...
Thermal and mechanical properties of high alumina low cement castable
(Association of Metallurgical Engineers of Serbia, 2012)
Alumina based low cement castable (LCC) was synthesized and then treated from room temperature to 1600°C. Ultrasonic measurements were applied with the aim to obtain results of longitudinal and transversal ultrasonic ...
Analysis of copper losses throughout weak acid effluent flows generated during off-gas treatment in the new copper smelter RTB Bor
(Association of Metallurgical Engineers of Serbia, 2013)
The previous inadequate treatment of off-gas in RTB Bor in Serbia has resulted in serious pollution of the environment and the possibly high losses of copper through the effluent flows. The project of New Copper Smelter ...
Dynamic mechanical properties of aramid fabrics impregnated with carbon nanotube/poly (vinyl butyral)/ethanol solution
(Association of Metallurgical Engineers of Serbia, 2013)
In this study six samples of polyurethane/p-aramid multiaxial fabric forms (Colon fabrics) were coated with 10 wt.% poly (vinyl butyral) (PVB)/ethanol solution with the addition of multiwalled carbon nanotubes (MWCNT). The ...
The effect of cooling rate of slag from primary copper production in the valorization of copper in the flotation process
(Savez inženjera metalurgije Srbije, Beograd, 2015)
Technological procedure of slow cooling slag from primary copper production is applied in the purpose of copper recovery in the level of 98.5% to blister. This technological procedure is divided into two phases, first slow ...
Treatment of dispersed iron-bearing raw materials and modeling of the protection systems against air-pollution
(Association of Metallurgical Engineers of Serbia, 2016)
Based on the analysis of the non-standard iron-bearing raw materials treatment process and the results of real composition measurements of the flue gas, the study of hazards by identification of harmful substances that ...
Ni-pd/al(2)o(3) catalyst supported on reticulated ceramic foam for dry methane reforming
(Savez inženjera metalurgije Srbije, Beograd, 2015)
In the present study, Ni-Pd/Al2O3 catalyst supported on alpha-Al2O3 based foam was prepared and evaluated in the dry methane reforming process. Corresponding metal chlorides were deposited to the foam surface by impregnation ...