Претраживање
Приказ резултата 1-10 од 164
Titanium dioxide nanoparticles surface modified with imine as fillers for epoxy resin / Nanočestice titan-dioksida površinski modifikovane iminom kao punioci za epoksidnu smolu
(Univerzitet u Nišu - Tehnološki fakultet, Leskovac, 2018)
The surface of anatase TiO2 nanoparticles was modified with in situ synthesized imine, based on 3,4-dihydroxybenzaldehyde and octadecylamine. The modified TiO2 nanoparticles were investigated using FTIR and UV-Vis spectroscopy, ...
Characterization of NiAl layers deposited by atmospheric plasma spray (APS) / Karakterizacija NiAl slojeva deponovanih atmosferskim plazma sprejom (APS)
(Engineering Society for Corrosion, Belgrade, Serbia, 2020)
In this paper analyzed were the mechanical properties and microstructure of the Ni30Al coating layers deposited using atmospheric plasma spray (APS). For deposition of the coating applied was a composite Ni30wt.% Al powder, ...
Production of lactic acid on liquid distillery stillage / Proizvodnja mlečne kiseline na tečnoj destilerijskoj džibri
(Nacionalno društvo za procesnu tehniku i energetiku u poljoprivredi, Novi Sad, 2011)
Bioethanol produced by fermentation of biomass is one of the most important renewable and ecologically friendly energy resources today. After bioethanol distillation a considerable amount of liquid stillage remains (1 hl ...
Numerical simulation of constraint effect on fracture initiation in welded specimens using a local damage model / Numerička simulacija uticaja veze na inicijaciju loma kod zavarenih epruveta upotrebom modela lokalnog oštećenja
(Society for Structural Integrity and Life, Institute for Material Testing, 2011)
In this paper, two micromechanical models: the Gurson-Tvergaard-Needleman (GTN) model and Complete Gurson Model (CGM) are used to predict ductile fracture initiation of two different welded specimens, SE(B) and C(T). The ...
Characterisation of biocompatible layers of ZrO28%Y2O used in combination with other ceramics to modify the surface of implants / Karakterizacija biokompatibilnih slojeva ZrO28%Y2O3 koji se koriste u kombinaciji sa drugom keramikom za modifikaciju površine implantata
(Inženjersko društvo za koroziju, 2021)
The aim of this study was to deposit multi-functional ZrO28%Y2O3 coating layers using the plasma spray technology and then to characterise such layers. In combination with other biomedical ceramics, this coating is intended ...
Quality, sources and balancing of iron and steel scrap / Kvalitet, izvori i bilansiranje otpadaka gvožđa i čelika
(Savez inženjera i tehničara Srbije, Beograd, 2015)
Besides iron ore, the main raw material of iron and steel production is steel scrap. This paper presents the quality and sources of creation the iron and steel scrap and estimation of their creation in the future. The ...
Leaching of chalcopyrite concentrate by hydrogen peroxide in sulphuric acid solution / Luženje halkopiritnog koncentrata rastvorom sumporne kiseline i vodonik-peroksida
(Savez inženjera i tehničara Srbije, Beograd, 2019)
Due to complex mineralogy and/or low content of base metals, some ores and mineral concentrates are not suitable for pyrometallurgical treatment. Therefore, those ores and concentrates have to be treated by application of ...
The mechanical and microstructural properties of VPS-Ti porous coating deposited on titanium alloy substrates for osseointegration / Mehanička i mikrostrukturna svojstva VPS-Ti porozne prevlake deponovane na podlogama od legure titana za osteointegraciju
(Engineering Society for Corrosion, Belgrade, Serbia, 2020)
The topography of the surface of the deposited VPS-Ti coatings on substrate surfaces of implants relating to the roughness and porous structure plays a decisive role in the process of on growth of the implants to the bones ...
Thermal treatment of composite wastes for energy recovery / Termički tretman otpadnih kompozitnih materijala u cilju dobijanja energije
(Engineering Society for Corrosion, Belgrade, Serbia, 2020)
The expression waste-to-energy technologies is increasingly being used regarding waste reduction and utilization. Waste-to-energy technologies are procedures used to generate different forms of energy starting from a waste ...
Estimation of GHG emission in Serbia for period 1995-2013 using recurent neural networks / Emisije gasova staklene bašte u Srbiji za period 1995-2013. godina primenom rekurentnih neuronskih mreža
(Naučno-stručno društvo za zaštitu životne sredine Srbije - Ecologica, Beograd, 2015)
The aim of this work was to create an ANN model for the prediction of GHG emissions in the Republic of Serbia in the period 1995-2013. Because of the lack of GHG emission data and inputs for Serbia, the ANN model was ...