Претраживање
Приказ резултата 1-10 од 22
Manifestations of dynamic strain ageing in 2090 Al-Li alloy
(International Journal of Materials Research, 2022)
The manifestations of dynamic strain ageing in a commercial 2090 Al - Li alloy were investigated in a wide range of temperatures (-40 to 100 degrees C) and strain rates (4.16x10(-5) to 4.16x10(-3) s(-1) ). Serrated yielding, ...
Macrophages, the main marker in biocompatibility evaluation of new hydrogels after subcutaneous implantation in rats
(Journal of Biomaterials Applications, 2022)
Biocompatibility of materials is one of the most important conditions for their successful application in tissue regeneration and repair. Cell-surface interactions stimulate adhesion and activation of macrophages whose ...
Modulated interference effect by ZnS nanoparticles / 3-Mercaptopropyltrimethoxysilane quasi core-shell structure: Far-infrared spectroscopy
(National Institute of Optoelectronics, 2022)
The ZnS nanoparticles, as starting materials in the present study, were synthesized mechanochemically. Surface modification of the obtained nanoparticles was performed by 3-Mercaptopropyltrimethoxysilane. SEM analysis ...
Hydrolysis of soft wheat flour: Enhanced functional properties and the effect of starch on allergenicity reduction
(Journal of Food Processing and Preservation, 2022)
The possibility to utilize Alcalase to hydrolyze soft wheat flour (SWF) containing high concentration of solids (i.e. starch) and the effect of its presence was investigated. At a degree of hydrolysis of 23.49% +/- 0.64%, ...
J-integral Analysis of the Simulated Heat-affected Zone of the Elevated-temperature Martensitic Steel
(Experimental Techniques, 2022)
Due to its superior strength at high temperatures P/T91 steel is often applied in the chemical, petrochemical and fossil-fired power generation industries. The high strength is achieved by a suitable martensitic microstructure ...
Ultrasound-assisted extraction of essential and toxic elements from pepper in different ripening stages using Box–Behnken design
(John Wiley and Sons Inc., 2022)
The influence of extraction parameters on the ultrasonically assisted extraction (UAE) of K, Na, Ca, Mg, Zn, Cu, Fe, Mn, Cr, Se, Mo, Li, Al, B, Pb, Hg, Cd, As, and Ni was studied to determine the conditions when a minimum ...
In silico–in vitro estimation of lipophilicity and permeability association for succinimide derivatives using chromatographic anisotropic systems and parallel artificial membrane permeability assay
(Biomedical Chromatography, 2022)
Passive permeability is one of the key features that determine absorbability and one of the most studied properties in the early phases of drug development. Newly synthesized succinimide derivatives from two different ...
Heat transfer by liquid convection in particulate fluidized beds / ПРЕНОС ТОПЛОТЕ КОНВЕКТИВНИМ МЕХАНИЗМОМ У ПАРТИКУЛАТИВНО ФЛУИДИЗОВАНОМ СЛОЈУ
(Serbian Chemical Society, 2022)
In this work the theoretical model for heat transfer from a wall to a
liquid-solid fluidized bed by liquid convective mechanism has been proposed.
The model is based on thickness of boundary layer and film theory. The ...
Hardness and corrosion resistance of Zn−Mn/Al2 O3 composite coatings produced by electrochemical deposition
(National Institute of Science Communication and Policy Research, 2022)
The aim of this study is development and characterization of the novel Zn-Mn/Al2O3 composite coatings. The coatings were electrodeposited with constant current density on steel, from chloride solution, without any commercial ...
Structural Design of Safety Steel Device of Railway Vehicles Through Analytical and Experimental Investigations
(Budapest Tech Polytechnical Institution, 2022)
The subject of this paper is the structural design of a safety steel device that is located between the standard wagon buffer and the collision energy absorber. The safety steel device is a sacrifical part able to withstand ...