Search
Now showing items 1-10 of 317
Structural, Chemical and Magnetic Properties of Nickel Vertical Posts Obtained by Glancing Angle Deposition Technique
(Science of Sintering, 2017)
In this work, Glancing Angle Deposition technique was used for obtaining nanostructured nickel thin film with vertical posts on glass substrate which was positioned 75 degrees with respect to the substrate normal and rotated ...
Application and testing of a new simple experimental set-up for thermal conductivity measurements of liquids
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2017)
Transient hot wire method is considered a reliable and precise technique for measuring the thermal conductivity of liquids. The present paper describes a new transient hot wire experimental set-up and its initial testing. ...
Mechanism of adsorption of Cu2+ and Zn2+ on the corn silk (Zea mays L.)
(Elsevier, Amsterdam, 2017)
In this study the novel biosorbent - raw corn silk (CS) was investigated for Cu2+ and Zn2+ removal from aqueous solutions. The physical and chemical properties of CS were determined by SEM - EDX and ATR - FTIR techniques. ...
Formation of Porous Wollastonite-based Ceramics after Sintering With Yeast as the Pore-forming Agent
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2017)
In this paper, synthesis of porous wollastonite-based ceramics was reported. Ceramic precursor, methylhydrocyclosiloxane, together with micro-sized CaCO3, was used as starting material. After 20 min of ultrasound treatment, ...
Blend of natural waxes as a matrix for aroma encapsulation / Smeša prirodnih voskova kao nosač za inkapsulaciju aroma
(Univerzitet u Nišu, Niš, 2017)
In this study, the possibility of using a blend of natural waxes (bees and carnauba) for encapsulation of some aroma compounds was investigated. Melt dispersion/melt solidification technique was applied for microbeads ...
Dependence of Structural Characteristics of Polyamide Textured Yarns on the Parameters of the False Twist Yarn Texturing Process
(Inst Chemical Fibres, Lodz, 2017)
In the false twist texturing process, due to the action of mechanical forces and heat, a disorientation of structural elements happens at all levels of the supramolecular structure. These changes are related to changes in ...
Structure and Properties of Polymer Nanocomposite Films With Carbon Nanotubes and Graphene
(Wiley, Hoboken, 2017)
In this report, we demonstrate a simple fabrication route for polyvinyl butyral (PVB)-based nanocomposites with carbon nanotubes and graphene. In spite of insufficient percolation threshold due to low concentration of ...
Effect of sepiolite organomodification on the performance of PCL/sepiolite nanocomposites
(Pergamon-Elsevier Science Ltd, Oxford, 2017)
Poly(epsilon-caprolactone) (PCL) based nanocomposites with unmodified and organomodified sepiolites were prepared by solution casting method. The sepiolites were modified with short (3-mercaptopropyl)trimethoxysilane ...
Effects of Catalyst Activity, Particle Size and Shape, and Process Conditions on Catalyst Effectiveness and Methane Selectivity for Fischer-Tropsch Reaction: A Modeling Study
(Amer Chemical Soc, Washington, 2017)
We investigate effects of catalyst activity, catalyst particle shape (sphere, slab, and hollow cylinder), size (i.e., diffusion length), catalyst distribution (uniform vs eggshell type distribution for a spherical particle), ...
Selective magnetic GMA based potential sorbents for molybdenum and rhenium sorption
(Elsevier Science Sa, Lausanne, 2017)
Magnetic macroporous crosslinked copolymer glycidyl methacrylate (GMA) and ethylene glycol dimethacrylate (EGDMA) samples with different magnetite content were prepared by suspension copolymerization and functionalized ...