Претраживање
Приказ резултата 21-30 од 41
The importance of using hydrogen evolution inhibitor during the Zn and Zn-Mn electrodeposition from ethaline
(Srpsko hemijsko društvo, Beograd, 2019)
Cyclic voltammetry was used for the characterization of zinc electro-deposition on steel from ethaline deep eutectic solution (1:2 choline chloride:ethylene glycol). The influence of 4-hydroxy-benzaldehyde (HBA) as an ...
Ceria Particles as Efficient Dopant in the Electrodeposition of Zn-Co-CeO2 Composite Coatings with Enhanced Corrosion Resistance: The Effect of Current Density and Particle Concentration
(Molecules, 2021)
Novel Zn-Co-CeO2 protective composite coatings were deposited successfully from chloride plating solutions. Two different types of ceria sources were used and compared: commercial ceria powder and home-made ceria sol. ...
Manganese electrodeposition from urea-rich electrolyte
(Soc Chemists Technologists Madeconia, Skopje, 2015)
Pure manganese coatings were prepared on the steel (AISI 4340) electrode by a non-conventional electrodeposition method, in the presence of 8 mol dm(-3) of urea as a plating additive. The influence of urea on the ...
Ternary Zn-Ni-Co alloy: anomalous codeposition and corrosion stability
(Srpsko hemijsko društvo, Beograd, 2015)
Electrochemically deposited Zn-Ni-Co alloys under various deposition conditions were investigated using atomic absorption spectroscopy for the determination of the chemical composition, atomic force microscopy for surface ...
Morphology, Structure and Mechanical Properties of Copper Coatings Electrodeposited by Pulsating Current (PC) Regime on Si(111)
(MDPI, Basel, 2020)
Copper electrodeposition on (111)-oriented Si substrate was performed by the pulsating current (PC) regime at various average current densities in the range of 15-70 mAcm(-2), obtained by varying either the frequency (30, ...
Effect of temperature on the electrodeposition of disperse copper deposits / Uticaj temperature na elektrohemijsko taloženje disperznih taloga bakra
(Serbian Chemical Society, 2007)
The effect of temperature on the electrodeposition of copper at overpotentials belonging to the plateau of the limiting diffusion current density and higher was examined by the determination of the average current efficiency ...
Influence of the type of electrolyte on the morphological and crystallographic characteristics of lead powder particles / Uticaj tipa elektrolita na morfološke i kristalografske karakteristike praškastih čestica olova
(Serbian Chemical Society, 2013)
Lead electrodeposition processes from basic (nitrate) and complex (acetate) electrolytes were mutually compared by scanning electron microscopy and X-ray diffraction investigation of the produced powder particles. The shape ...
Morphology and Structure of Electrolytically Synthesized Tin Dendritic Nanostructures
(MDPI, 2022)
The formation of tin dendritic nanostructures by electrolysis from the alkaline electrolytehas been investigated. Morphology and structure of Sn dendrites produced applying both potentiostatic and galvanostatic regimes of ...
INFLUENCE OF ELECTRODEPOSITION REGIME AND Sn:Pd RATIOS IN Sn-Pd ELECTROCATALYSTS ON ETHANOL OXIDATION REACTION / ВЛИЈАНИЕ НА РЕЖИМОТ НА ЕЛЕКТРОДЕПОЗИЦИЈАТА И НА ОДНОСИТЕ НА Sn:Pd ВО Sn-Pd-ЕЛЕКТРОКАТАЛИЗАТОРИТЕ ВРЗ ОКСИДАЦИЈАТА НА ЕТАНОЛОТ
(Society of Chemists and Technologists of Macedonia, 2023)
A series of bimetallic Sn-Pd catalysts were prepared by a template-free two step electrodeposition method. According to this method, Sn was electrodeposited firstly in potentiostatic or galvanostatic regime on Cu electrodes ...
Estimation of the exchange current density and comparative analysis of morphology of electrochemically produced lead and zinc deposits
(Serbian Chemical Society, 2017)
The processes of lead and zinc electrodeposition from the very dilute electrolytes were compared by the analysis of polarization characteristics and by the scanning electron microscopic (SEM) analysis of the morphology of ...