Претраживање
Приказ резултата 3091-3100 од 3115
Influence of Electrolytic Copper Powder Particle Morphology on Electrical Conductivity of Lignocellulose Composites and Formation of Conductive Pathways
(Electrochemical Science Group, 2014)
Composites based on polymers with conductive fillers have been gaining more significant roles in a variety of technological domains and they are getting in the research focus of numerous studies as a part of growing research ...
Mixtures of methanol and 2-propanol as a potential fuel for direct alcohol fuel cells / Smeša metanola i 2-propanola kao potencijalno gorivo u gorivim spregovima sa alkoholom
(Serbian Chemical Society, Belgrade, 2007)
The electrochemical oxidation of methanol, 2-propanol, and their mixtures was investigated on a Pt/C thin film electrode in acid solution. It was confirmed that the oxidation of 2-propanol commences at less positive ...
Optimization of solid-phase extraction for analysis of artificial sweeteners in water
(Beograd : Srpsko hemijsko društvo, 2018)
After decades of using artificial sweeteners in the food and pharmaceutical industry, their ubiquitous presence in the environment has been determined 1,2. These substances are recognized as emerging pollutants due to ...
Improvement of cavitation resistance of composite films using functionalized alumina particles
(Savez hemijskih inženjera, Beograd, 2018)
Composite films having the UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as a matrix and the ferrous oxide doped alumina (Al2O3 Fe) based particles were prepared and subjected ...
Acentric factor estimation from the corresponding states principle
(Serbian Chemical Society, 2006)
Acentric factor estimation from the corresponding states principle was conducted. The reported values, or analytical expressions, of the functions f(0), f(1) and f(2) are presented. The tabulated values of f(0), f(1) and ...
Effect of plasma hardfacing and carbides presence on the occurrence of cracks and microcracks
(Society for Structural Integrity and Life, Institute for Material Testing, 2018)
Presented is the effect of plasma hardfacing (or just hardfacing) and carbides presence on the occurrence of cracks and microcracks in the welded layer. The reasons behind this phenomenon are analysed and explained. In ...
Fuel consumption analysis in cooper melting and refining plants / Analiza potrošnje energenata u pogonima za topljenje i rafinaciju bakra
(Savez inženjera metalurgije Srbije, Beograd, 2004)
Cathode cooper production and refining include significant consumption of almost all-conventional fuel types. The given consumption is high in specific and in nominal way. Especially high fuel value content is on Cathode ...
Structural and functional characterization of papain-assisted ultrasound pretreated egg white hydrolysis
(Portugal : Proteomass, 2016)
The main objective of this research is to quantitatively investigate the impact of high intensity
ultrasound waves generated by probe-type sonicator on the selected functional and structural properties of papainassisted ...
KIT-5-Assisted Synthesis of Mesoporous SnO2 for High-Performance Humidity Sensors with a Swift Response/Recovery Speed
(MDPI, 2023)
Developing highly efficient semiconductor metal oxide (SMOX) sensors capable of accurate and fast responses to environmental humidity is still a challenging task. In addition to a not so pronounced sensitivity to relative ...
Micromechanical fracture analysis of laminated glass-epoxy composite material tested by bending / Mikromehanička analiza loma laminatnog staklo-epoksi kompozitnog materijala ispitivanog savijanjem
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
The object and purpose of this work is the micromechanical analysis of failures caused by mechanical tests of laminate glass-epoxy composite material in bending. The structure of glass-epoxy composite material is a glass ...