Pretraživanje
Prikaz rezultata 31-40 od 168
Polyaniline based corrosion inhibitors for conventional organic coatings / Primena polianilina kao inhibitora korozije klasičnih organskih prevlaka
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Corrosion protection using conventional coatings is the most used method. Application of polyaniline (PANI) as an inhibitor in conventional coating is based on its proven and well examined protective nature, with motivation ...
Defect formation during synthesis and welding of silver nanowires for solar cell applications
(Savez inženjera metalurgije Srbije, Beograd, 2019)
Structural defects such as stacking faults and twins, observed in many face-centered cubic (FCC) structured metals and alloys with low stacking fault energies, in general, play an important role in microstructure evolution, ...
The effect of friction stirs welding speed on microstructure, mechanical properties and IGC of EN AW-5083 plates
(Advanced Technologies and Materials, 2019)
The aim of this work was to evaluate the influence of welding speed on microstructure, mechanical properties, as well as Intergranular corrosion (IGC) susceptibility of EN AW-5083 alloy welded using FSW. FSW was performed ...
Micromalting of triticale varieties NS Paun and Odisej
(Faculty of Technology, Novi Sad, 2018)
The objective of this study was to evaluate the possibility of application of two triticale varieties, NS Paun and Odisej, as partial substitutes for barley malt in wort production, based on the triticale analyses, ...
Characterization and usefulness of corn cob as biosorbent for Pb2+, Cu2+ and Zn2+ ions removal from aqueous solutions / Karakterizacija i primena oklaska kukuruza za biosorpciju Pb2+, Cu2+ i Zn2+ jona iz vodenog rastvora
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
The objective of this study was to investigate corncob as biosorbent for heavy metals removal from aqueous solutions. All biosorption experiments were performed in batch system. The biosorbent were caracterized by thermal ...
Algorithm for quantifying the particle size distribution of non-metallic inclusions formation in steel production
(Metallurgical & Materials Engineering, 2021)
When the quantitative characterization of non-metallic inclusions in steel is done and the effect of limiting factors is assessed, and based on that the possibility of reconstruction of the total content of non-metallic ...
Influence of technological development on encouraging innovativeness of domestic industrial enterprises / Uticaj tehnološkog razvoja na podsticanje inovativnosti domaćih industrijskih preduzeća
(Savez ekonomista Srbije, Beograd, 2016)
Technology and technological development are the key factors of contemporary socio-economic development, and the application of the latest technological achievements is the developed countries' most powerful means of ...
Some aspects of physical metallurgy of microalloyed steels
(Savez inženjera metalurgije Srbije, Beograd, 2019)
Some aspects of deformation, precipitation, and recrystallization behavior in medium carbon V-microalloyed and low carbon Nb/Ti-microalloyed steels are presented in the paper. Changes in microstructure are explained together ...
Applicability of risk-based maintenance strategy to a penstock / Strategija održavanja zasnovana na riziku - primenljivost na cevovod
(Society for Structural Integrity and Life, Institute for Material Testing, 2012)
The risk of brittle fracture of the penstock of the reversible pump turbine is recognized in an early stage of design. To reduce the cost of penstock construction one tunnel is accepted. The HSLA steel of 700 MPa yield ...
Influence of microwave irradiation on hypochlorite decolorisation of synthetic dyes / Uticaj mikrotalasnog zračenja na obezbojavanje sintetskih boja hipohloritom
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
In this study three synthetic dyes were treated using hypochlorite or combination of hypochlorite and microwave irradiation in order to investigate factors which determine decolorisation of the investigated compounds. An ...