Претраживање
Приказ резултата 41-50 од 74
The Effect of Nanofibrillated Tempo-oxidized Cotton Linters on the Strength and Optical Properties of Paper
(Journal of Natural Fibers, 2022)
This study elaborates the application of composite films based on nanofibrillated cellulose obtained from cotton linters oxidized in the 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)/NaBr/NaClO system, with the use ...
PVB/sepiolite nanocomposites as reinforcement agents for paper
(Srpsko hemijsko društvo, Beograd, 2016)
In order to improve the mechanical properties of paper, 1, 3 and 5 wt. % of sepiolite were dispersed in a poly(vinyl butyral) (PVB) matrix and coated onto the surface of schrenz (110 g m(-2)). Deagglomerated sepiolite ...
Characterization of tantalum coatings deposited using vacuum plasma spray process / Karakterizacija tantal prevlake deponovane vakuum plazma sprej procesom
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Tantalum is a very popular material for the industry as a whole because of very important characteristics such as: high melting point, significant thermal and electrical conductivity, high toughness and resistance to ...
Age hardening potential of an Al-4.6 wt.% Mg alloy with Cu addition
(Belgrade : Institute of Technical Sciences of SASA, 2010)
The ageing behavior of an Al-4.6Mg-0.54Cu (in wt.%) alloy was studied after: (i) solution
treatment for 1h at 530°C, and (ii) annealing at 280°C for 3h. Both groups of the heat treated
specimens underwent further ...
Mechanical properties of composites based on unsaturated polyester resins obtained by chemical recycling of poly(ethylene terephthalate) / Mehanička svojstva kompozita na bazi nezasićenih poliestarskih smola dobijenih hemijskom reciklažom poli(etilen-tereftalata)
(Association of Chemical Engineers of Serbia, 2013)
Composites based on unsaturated polyester (UPe) resins and fumed silica AEROSIL® RY 50, NY 50, RX 50 and NAX 50, as well as graphite, TiO2 or organically modified clay CLOISITE 30B were prepared in order to investigate the ...
Mechanical and structural features of Nb coating layers deposited on steel substrates in a vacuum chamber / Mehaničke i strukturne karakteristike slojeva prevlake Nb deponovane u vakuumu
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
In this paper analyzed was the influence of implementation of inert Ar gas and a mixture of inert plasma Ar / He gases in a vacuum chamber on the deposition of reactive niobium (Nb) powder. The aim of this paper was to ...
Comparative Study of the Microstructure and Properties of Cast-Fabricated and 3D-Printed Laser-Sintered Co–Cr Alloys for Removable Partial Denture Frameworks
(MDPI, 2023)
Since additive technologies in dentistry are gradually replacing metal casting technology, it is necessary to evaluate new dental constructions intended for the development of removable partial denture frameworks. The aim ...
PMMA-Y2O3 (Eu3+) nanocomposites: Optical and mechanical properties / Nanokompozit PMMA-Y2O3 (Eu3+) - optička i mehanička svojstva
(Serbian Chemical Society, Belgrade, 2011)
The results of a study related to the processing and characterization of poly(methyl methacrylate) (PMMA)-Y2O3 (Eu3+) nanocomposites are presented herein. The nanocomposite samples were prepared using a laboratory mixing ...
Influence of SA procedure welding parameters on mechanical properties spiral welded steel tubes API X60 / Uticaj parametara EPP postupka zavarivanja na mehaničke osobine spiralno zavarenih cevi od čelika API X60
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2009)
The selection of steel, the dimensions and methods of seam welded steel tubes fabrication are closely connected to the function of tube as a whole structure in specific working conditions, for a calculated service life. ...
Fracture micromechanisms in overaged 7000 alloy forgings
(Journal of Alloys and Compounds, 2007)
Micromechanisms controlling the fracture damage in 7000 alloy forgings are studied for T73-type heat treatments. Insight into the fracture modes are obtained by varying the microstructural attributes associated with the ...