Претраживање
Приказ резултата 1-10 од 1036
Numerical simulation of fatigue crack propagation: A case study of defected steam pipeline
(Elsevier Ltd, 2019)
In order to prevent the premature failure of steam pipeline produced of molybdenum-vanadium steel, the experimental tests were performed to measure fracture toughness and to determine the mechanical behaviour of cracked ...
The removal of Zn2+, Pb2+, and As(V) ions by lime activated fly ash and valorization of the exhausted adsorbent
(Pergamon-Elsevier Science Ltd, Oxford, 2018)
This study focuses on the use of raw fly ash (FA) and modified fly ash - activated by lime (MFA), as effective and low-cost adsorbents for the removal of heavy metals (Zn2+, Pb2+ and As(V)), followed by the revalorization ...
Functionalization of polypropylene, polyamide and cellulose acetate materials with pyrethrum extract as a natural repellent in supercritical carbon dioxide
(Elsevier Science Bv, Amsterdam, 2018)
This study discusses the possibility of supercritical solvent impregnation of polypropylene and polyamide fabrics as well as cellulose acetate in the form of beads and films with pyrethrum extract in order to fabricate ...
Comparative study of CeO2 nanopowders obtained by the hydrothermal method from various precursors
(Elsevier Sci Ltd, Oxford, 2015)
The effects of common precursors used in the synthesis of CeO2 nanopowders were investigated, and the structural and spectral properties of the resulting products were compared. Two cerium (III) salts, i.e., Ce(NO3)(3)center ...
Morphology, Structure and Mechanical Properties of Copper Coatings Electrodeposited by Pulsating Current (PC) Regime on Si(111)
(MDPI, Basel, 2020)
Copper electrodeposition on (111)-oriented Si substrate was performed by the pulsating current (PC) regime at various average current densities in the range of 15-70 mAcm(-2), obtained by varying either the frequency (30, ...
Microstructure and cavitation erosion performance of nickel-Inconel 718 composite coatings produced with cold spray
(Elsevier Science Sa, Lausanne, 2020)
The cold spray technique was employed in this study to produce pure nickel (Ni) and nickel-Inconel 718 powder deposits on duplex stainless steel substrates. High quality coatings were manufactured using nitrogen as the ...
Broad Spectrum of Antimicrobial Activity of Cotton Fabric Modified with Oxalic Acid and CuO/Cu2O Nanoparticles
(Korean Fiber Soc, Seoul, 2019)
This study discusses the possibility of fabrication of textile nanocomposites with antimicrobial activity against antibiotics-resistant bacterial strains and yeast. Modification of cotton fabric with oxalic acid solutions ...
In vitro investigation of electrophoretically deposited bioactive hydroxyapatite/chitosan coatings reinforced by graphene
(Elsevier Science Inc, New York, 2017)
Graphene (Gr) and natural polymer chitosan (CS) were introduced to hydroxyapatite (HAP) to produce a three-component composite coating, which was fabricated by cathodic electrophoretic deposition on Ti substrates in an ...
Assessment of CaTiO3, CaMnO3, CaZrO3 and Ca2Fe2O5 perovskites as heterogeneous base catalysts for biodiesel synthesis
(Elsevier Science Bv, Amsterdam, 2016)
Calcium-containing perovskites CaTiO3, CaMnO3, CaZrO3 and Ca2Fe2O5 were synthesized by calcination of mechanochemically treated stoichiometric mixtures of CaCO3 and either TiO2, MnO2, ZrO2 or Fe2O3 powders. X-ray diffraction ...
Prediction of the transition temperature of bent-core liquid crystals using fuzzy "digital thermometer" model based on artificial neural networks
(Pergamon-Elsevier Science Ltd, Oxford, 2018)
A dataset containing transition temperature values for 243 bent-core liquid crystal (LC) compounds was used to develop quantitative structure property relationship (QSPR) models using only 2D molecular descriptors and ...