Претраживање
Приказ резултата 41-50 од 188
Adsorption kinetics of polyethersulfone membrane-supported hydrogels
(Desalination Publ, Hopkinton, 2018)
This study presents the route for preparation of the membrane-supporting materials with good mechanical behavior and adsorption properties that provide functionality and are easy to use in various environments. Polyethersulfone ...
Thermodynamics of mixed and pure aqueous solutions of K2HPO4 at T=298.15 K
(Maik Nauka/Interperiodica/Springer, New York, 2015)
Experimental results on isopiestic measurements for three ternary aqueous solutions of K2HPO4 with KCl, KBr, and KNO3 at T = 298.15 K were modeled with the Clegg-Pitzer-Brimblecombe equation based on mole-fraction-composition ...
Immobilization of maltase from Saccharomyces cerevisiae on thiosulfonate supports
(Srpsko hemijsko društvo, Beograd, 2016)
In this study, two commercial supports (Eupergit (R) C and Purolite (R) A109) were chemically modified in order to introduce thiosulfonate groups, which could subsequently exclusively react with the cysteine residues on ...
Determination of s-genotype in apple and sweet cherry cultivars released at fruit research institute, Cacak
(Društvo genetičara Srbije, Beograd, 2017)
Apples and sweet cherries are generally characterized by self-incompatibility, which is controlled by the multiallelic locus S with gametophytic action. Thus the identification of S-genotype represents crucial information ...
Differences in the mode of thermomechanical processing between white gold alloys to produce semi-finished products
(Bulgarian Acad Science, Sofia, 2015)
The results of the investigation of the reduction degree on the hardness of a gold sample with chemical composition Au58,5Ag15Cu9,5Ni9Zn5Pd3 for old white gold alloy and Au58,5Ag18Cu10,5Ga8Zn5 (wt %) for new white gold ...
Photocatalytic Performance of Carbon Monolith/TiO2 Composite
(Hindawi Ltd, London, 2015)
The new and simple approach for deposition of catalytically active TiO2 coating on carbon monolith (CM) carrier was presented. CM photocatalysts were impregnated with TiO2 using titanium solution and thermal treatment, and ...
Isopiestic Determination of the Osmotic and Activity Coefficients of the {yNa(2)HPO(4) + (1-y)K2HPO4}(aq) System at T=298.15 K
(Springer/Plenum Publishers, New York, 2016)
Isopiestic measurements have been made for aqueous mixtures of Na2HPO4 and K2HPO4 at T = (298.15 +/- 0.01) K, at Na2HPO4 ionic strength fractions y = (0.2023, 0.4060, 0.6027, 0.8007, and 1), using KCl(aq) as the reference ...
Modelling, simulation and optimisation of pulse-reverse regime of copper, silver and gold electrodeposition
(Carl Hanser Verlag, 2018)
Pulse-reverse power modes are used in galvanotechniques in order to obtain coatings with better characteristics in terms of gloss, adhesion, tracking sharp edges and uniform distribution of deposits on complex shape objects, ...
Structure and photocatalytic properties of sintered TiO2 nanotube arrays
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2018)
One-dimensional (1D) TiO2 nanotubes perpendicular to the substrate were obtained by electrochemical oxidation of titanium foil in an acid electrolyte. In order to alter the crystallinity and the morphology of films the ...
Removal of emerging pathogenic bacteria using metal-exchanged natural zeolite bead filter
(Iwa Publishing, London, 2019)
Hospital wastewaters can become a route for dissemination of antibiotic-resistant bacteria to the environment if not properly treated. Some of these bacteria are able to survive conventional disinfection treatments (e.g. ...