Претраживање
Приказ резултата 471-480 од 481
Optimization of modifier deposition on the alumina surface to enhance mechanical properties and cavitation resistance
(Springer, New York, 2020)
Composites based on poly(methyl methacrylate), dimethyl itaconate matrix and alumina particles were prepared. Ferrous oxide-doped alumina particles (Al2O3Fe) and commercial alumina nanoparticles (Al(2)O(3)n) modified with ...
Mechanical properties of acrylate matrix composite reinforced with manganese-aluminum layered double hydroxide
(John Wiley and Sons Inc., 2023)
Acrylate polymers are used in several applications such as dentistry, medicine, and industry. The modification of their properties using the reinforcement is of key importance for the possible applications. Layered double ...
Improvement in cavitation resistance of poly (vinyl butyral) composite films with silica nanoparticles: A technical note
(Polymers & Polymer Composites, 2021)
In this study poly (vinyl butyral)/silica (PVB/SiO2) composite films were subjected to the cavitation process. The experiments were carried out with a 10 wt.% PVB solution in ethanol. Silica nanoparticles were added into ...
Denture composite reinforced with short polyethylene terephthalate fibers
(John Wiley and Sons Inc., 2022)
Polymer matrix composite materials have found application in dentistry because of good mechanical properties, aesthetic, easy processing, and possibilities of the repair. Acrylates are materials used to make and repair ...
Basalt-Polyester Hybrid Composite Materials for Demanding Wear Applications
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2020)
Basalt as a filler in a polymer-based composite material fulfils the demand of being natural, environment-friendly material for the production of various composite materials. The material could be used as protective layer ...
A closed cycle of sustainable development: Effective removal and desorption of lead and dyes using an oxidized cellulose membrane
(Elsevier B.V., 2023)
Oxidized cotton linters, TOCell, were used as an adsorbent or derived membrane there from by linters
cross-linking with citric acid. The adsorption/desorption study of Pb2+, methylene blue (MB), and crystal
violet (CV) ...
High temperature materials: properties, demands and applications
(Savez hemijskih inženjera, Beograd, 2020)
High-temperature materials are used in a wide range of industries and applications such as gas turbine engines for aircrafts, power and nuclear power plants, different types of furnaces, including blast furnaces, some fuel ...
The effect of polyhedral oligosilsesquioxanes (POSS) on cavitation resistance of hybrid acrylate films
(Wiley, Hoboken, 2020)
Cavitation erosion of hybrid acrylate composite films with polyhedral oligosilsesquioxanes (POSS) was investigated in this study. The hybrid films are made with 1, 3 and 5 wt% of POSS reagents containing: (a) hydroxyl ...
Hydroxyapatite-based dental inserts: microstructure, mechanical properties, bonding efficiency and fracture resistance of molars with occlusal restorations
(John Wiley and Sons Inc., 2024)
This study aimed to (1) comparatively analyze properties of Sr- and Mg-substituted hydroxyapatite (HAP)-based dental inserts; (2) evaluate insert bonding to restorative materials, and (3) evaluate the effect of doped HAP ...
Soft 3D hybrid network for delivery and controlled release of poorly soluble dihydropyrimidinone compound: An insight into the novel system for potential application in leukemia treatment
(John Wiley and Sons Inc., 2022)
Researchers are faced with everyday demands for safer and more efficient therapy for many diseases, especially serious one such as various types of cancer. Numerous anticancer drugs are poorly-water soluble and therefore ...