Претраживање
Приказ резултата 11-20 од 26
Synthesis of α-Al2O3 based foams with improved properties as catalyst carriers
(Institute of Metals and Technology, 2014)
This paper explores the possibility of synthesising catalyst supports with improved properties. Alumina foams were produced with the polymer replication technique. Representative high- and low-temperature sintering ceramics ...
Studying the influence of common wet processes on the quality of 1 × 1 rib cotton/elastane knitted fabrics
(SAGE Publications Ltd, 2022)
This research studied the influence of common wet processes (i.e. bleaching, dyeing, or softening) on the quality of 1 × 1 rib cotton/elastane knitted fabrics. The changes in their structural (thickness, weight, and stitch ...
Mehanička svojstva hibridnog kompozita UHMWPE/EVA ojačanog vlaknima dobijenim elektropredenjem / Mechanical properties of UHMWPE/EVA hybrid composite reinforced with fibers obtained by electrospinning
(Savez inženjera i tehničara Srbije, 2018)
Aluminijum oksidna (Al2O3) nanovlakna pripremljena su iz vodenog rastvora aluminijum hlorohidrata/poli(vinil alkohola) (PVA) korišćenjem tehnike elektropredenja. Maseni odnos aluminijum hlorohidrata/PVA bio je 5:1. Nakon ...
Effects of poly(vinyl alcohol) blending with Ag/alginate solutions to form nanocomposite fibres for potential use as antibacterial wound dressings
(Royal Society Publishing, 2022)
In this work, nanocomposite fibres and microfibres based on alginate and poly(vinyl alcohol) (PVA) with silver nanoparticles (AgNPs) were produced and characterized for potential application as antibacterial wound dressings. ...
Inorganically modified particles FeAl-LDH"SiO2 as reinforcement in poly (methyl) methacrylate matrix composite
(Royal Society Open Science, 2021)
Silica particles were obtained from rice husk to which layered double hydroxide particles were deposited (weight ratio 1 : 1). Fe2+-Al3+ layered double hydroxides (FeAl-LDH) were synthesized by co-precipitation with ratios ...
Age hardening potential of an Al-4.6 wt.% Mg alloy with Cu addition
(Belgrade : Institute of Technical Sciences of SASA, 2010)
The ageing behavior of an Al-4.6Mg-0.54Cu (in wt.%) alloy was studied after: (i) solution
treatment for 1h at 530°C, and (ii) annealing at 280°C for 3h. Both groups of the heat treated
specimens underwent further ...
Quality of Cotton and cotton/elastane Single Jersey Knitted Fabrics before and after Softening and in Situ Synthesis of Cu-based Nanoparticles
(Taylor and Francis Ltd., 2022)
The quality of cotton and cotton/elastane single jersey knitted fabrics before and after softening was evaluated through their mechanical properties, pilling, and volume electrical resistivity. Elastane-containing fabrics ...
Mechanical properties of two Al-Mg alloys manufactured by accumulative roll bonding (ARB) process
(Belgrade : Association of Metallurgical Engineers of Serbia (AMES), 2017)
The influence of alloying on the mechanical properties of AA5083 type Al-Mg
alloy sheets produced by accumulative roll bonding (ARB) process was studied.
Two investigated Al-Mg alloys: commercial AA5083 alloy with 4.2% ...
Influence of an accumulative roll bonding (ARB) process on the properties of AA5083 Al-Mg alloy sheets
(Association of Metallurgical Engineers of Serbia AMES, 2014)
In this study, fully annealed AA5083 type alloy sheets with 1 mm in thickness
were processed by accumulative roll bonding (ARB) at room temperature, up to 6 ARB
cycles. It was found that microstructure was refined and ...
Development of Coated Electrodes with Solid Wire and Flux-Cored Alloyed Wire for Microalloyed Steel Welding
(MDPI, Basel, 2020)
In this paper, we will present our investigation of the quality of J55 microalloyed steel welds that were formed by a basic flux-cored wire electrodes that were of appropriate quality and alloyed with Ni and Mo. Based on ...