Pretraživanje
Prikaz rezultata 41-50 od 996
The formation of oxide nanoparticles on the surface of natural clinoptilolite
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
Nanoparticles of NiO, ZnO and Cu(2)O crystallize when the Ni-, Zn- and Cu-exchanged natural clinoptilolite, respectively, are dehydrated by heating in air at 550 degrees C. The dehydration of Mn-exchanged clinoptilolite ...
Functionalization of thermo-acid activated sepiolite by amine-silane and mercapto-silane for chromium(VI) adsorption from aqueous solutions / Adsorpcija hroma(VI) iz vodenih rastvora na termo-kiselinski aktiviranom sepiolitu funkcionalizovanom amino-silanom i merkapto-silanom
(Association of Chemical Engineers of Serbia, 2013)
Chromium(VI) adsorption from aqueous solutions onto thermo-acid activated sepiolite functionalized with (3-mercaptopropyl)trimethoxy-silane and [3-(2-aminoethylamino)propyl]trimethoxy-silane was investigated. Scanning ...
Novel hydrogel nanocomposites based on alginate and silver nanoparticles
(24th European Conference on Biomaterials, EBS 2011, 2011)
Biomechanical properties of alginate hydrogels in a biomimetic bioreactor for cartilage tissue engineering
(24th European Conference on Biomaterials, EBS 2011, 2011)
Short-circuit oxygen diffusion in thermally grown silica layer
(World Scientific Publ Co Pte Ltd, Singapore, 2010)
Amorphous polymer-derived Si-C-N ceramics can be doped with different elements (Al, B etc.) through various pre-ceramic polymer routes. Thus, controlling of the high temperature oxidation resistance can be achieved on an ...
The effect of accelerated aging on the mechanical properties of PMMA denture base materials modified with itaconates / Uticaj ubrzanog starenja na mehanička svojstva poli(metil-metakrilatnih) materijala za bazu zubnih proteza modifikovanih itakonatima
(Association of Chemical Engineers of Serbia, 2011)
This study evaluated the effect of accelerated aging on tensile strength, elongation at break, hardness and Charpy impact strength in commercial PMMA denture base material modified with di-methyl itaconate (DMI) and ...
Influence of picosecond laser pulses on the microstructure of austenitic materials
(Springer, New York, 2011)
We investigate samples of austenitic materials - stainless steel and iron-based superalloy - which are widely used at high temperatures and pressures. The samples were exposed to Nd(3+):YAG laser pulses with a wavelength ...
Field performance of micropropagated rubus species
(Acta Scientiarum Polonorum, Hortorum Cultus, 2016)
The objective of this study was to test yield and fruit quality of the red raspberry 'Meeker' and the blackberry 'Cacanska Bestrna' propagated using the standard method (ST) and in vitro, by tissue culture (TC). The monitored ...
Multipurpose nonwoven viscose/polypropylene fabrics: Effect of fabric characteristics on sorption and dielectric properties
(Wiley, Hoboken, 2018)
In this work, sorption and dielectric properties of viscose/polypropylene multipurpose nonwoven fabrics were examined. The analysis of sorption behavior showed that the changes of the water absorptive capacity, the height ...
The analysis of forming PVB-SiO2 nanocomposite fibers by the electrospinning process / Analiza formiranja PVB-SiO2 nanokompozitnih vlakana pomoću elektrospining procesa
(Military Technical Institute, Belgrade, 2011)
The poly (vinyl butyral)-silica (PVB-SiO2) nanofibers were obtained by the electrospinning process. The experiments were carried out with PVB solution in concentration of 10 wt.% where ethanol was used as the solvent. The ...