Претраживање
Приказ резултата 61-70 од 139
Waste Lard Methanolysis Catalyzed by KOH at Moderate Temperatures
(Wiley-VCH Verlag Gmbh, Weinheim, 2016)
The KOH-catalyzed methanolysis of waste lard from piglet roasting in a moderate temperature range was investigated in order to establish the reaction kinetics. For comparison, lard and thermally treated lard were also ...
Bactericidal activity of Cu-, Zn-, and Ag-containing zeolites toward Escherichia coli isolates
(Springer Heidelberg, Heidelberg, 2017)
Two types of zeolites-natural clinoptilolite (NZ) and synthetic zeolite A (A)-were enriched with approx. 0.25 mmol of Cu(II), Zn(II), or Ag(I) ions, and the obtained materials (M-Z) were tested against three different ...
Evaluation of the impact of critical quality attributes and critical process parameters on quality and stability of parenteral nutrition nanoemulsions
(Elsevier, Amsterdam, 2017)
The aim of this study was to develop, characterize and evaluate concentrated nanoemulsions (20%) for parenteral nutrition. Those systems were developed by the high-pressure homogenization method. Optimal conditions for the ...
Ag+, Cu2+ and Zn2+ doped hydroxyapatite/tricalcium phosphate bioceramics: Influence of doping and sintering technique on mechanical properties
(University of Novi Sad, Faculty of Technology, 2018)
Green hydroxyapatite ceramics were obtained by cold uniaxial and isostatic pressing of hydrothermally synthesized powders, pure hydroxyapatite and hydroxyapatite doped with Ag+, Cu2+ and Zn2+ ions. The ceramics were ...
Nimonic 263 microstructure and surface characterization after laser shock peening
(Croatian Metallurgical Soc, Zagreb, 2015)
The Laser Shock Peening (LSP) is applied to the surface of Nimonic 263 alloy. The changes in microstructure and surface topography are observed and analyzed by Scanning Electron Microscopy (SEM), profilometer and microhardness ...
Doping of TiO2 nanotubes with nitrogen by annealing in ammonia for visible light activation: Influence of pre- and post-annealing in air
(Elsevier Ltd, 2019)
The ∼60 nm wide and ∼2 μm long TiO2 nanotubes were obtained by anodization of Ti films sputtered on F-doped tin oxide glass. For N-doping the samples were annealed in ammonia atmosphere. The effect of pre- and post-annealing ...
Equilibrium, kinetic and thermodynamic studies on removal of Cd(II), Pb(II) and As(V) from wastewater using carp (cyprinus carpio) scales
(Inst Materials Physics, Bucharest, 2013)
Unmodified farming carp (cyprinus carpio) scales were used as a biosorbent for the removal of Cd(II), Pb(II) and As(V) ions from aqueous solutions. The adsorption studies were conducted as a function of pH, contact time ...
Silver release from nanocomposite Ag/alginate hydrogels in the presence of chloride ions: experimental results and mathematical modeling
(Springer, Dordrecht, 2016)
A stepwise experimental and mathematical modeling approach was used to assess silver release from nanocomposite Ag/alginate microbeads in wet and dried forms into water and into normal saline solution chosen as a simplified ...
Synthesis and characterization of interpenetrating polymer network based on sodium alginate and methacrylic acid and potential application for immobilization of TiO2 nanoparticles
(Wiley, Hoboken, 2015)
An interpenetrating polymer network (IPN) based on the sodium alginate (A) and partially neutralized poly(methacrylic acid) (MAA) was prepared by free radical polymerization followed by additional cross-linking of sodium ...
Mechanical and corrosion properties of AA5083 alloy sheets produced by accumulative roll bonding (ARB) and conventional cold rolling (CR)
(Wiley-VCH Verlag Gmbh, Weinheim, 2018)
Influence of accumulative roll bonding (ARB) and conventional cold rolling (CR) on the mechanical and corrosion properties of AA5083 alloy sheets has been studied. Tensile tests showed significant increase in strength and ...