Претраживање
Приказ резултата 21-30 од 188
A study of the photocatalytic degradation of the textile dye CI Basic Yellow 28 in water using a P160 TiO2-based catalyst / Proučavanje fotokatalitičke degradacije tekstilne boje CI Basic Yellow 28 u vodi koristeći P160 katalizator na bazi TiO2
(Serbian Chemical Society, Belgrade, 2012)
The photocatalytic degradation of the synthetic textile dye CI Basic Yellow 28 (BY28) in water, using a recently synthesized P160 TiO2-based catalyst, under Osram ultra-vitalux® lamp (300 W) light, was studied. The effects ...
Electrochemical impedance spectroscopy of a silver-doped hydroxyapatite coating in simulated body fluid used as a corrosive agent / Spektroskopija elektrohemijske impedancije prevlake hidroksiapatita dopirane srebrom u simuliranoj telesnoj tečnosti korišćenoj kao korozioni agens
(Serbian Chemical Society, Belgrade, 2012)
Titanium is a key biomedical material due to its good biocompatibility, mechanical properties and corrosion stability, but infections at the implantation site still pose a serious threat. One approach to prevent infection ...
Controlled swelling and degradation studies of alginate microbeads in dilute natrium citrate solutions / Ispitivanje mogućnosti kontrolisanog bubrenja i razgradnje alginatnih mikročestica u razblaženim rastvorima natrijum-citrata
(Association of Chemical Engineers of Serbia, 2010)
Alginate hydrogels are widely used in biomedicine due to alginate availability, hydrophilic nature, biocompatibility and biodegradability. Alginate microbeads are particularly attractive for applications in pharmacy and ...
The effect of accelerated aging on the mechanical properties of PMMA denture base materials modified with itaconates / Uticaj ubrzanog starenja na mehanička svojstva poli(metil-metakrilatnih) materijala za bazu zubnih proteza modifikovanih itakonatima
(Association of Chemical Engineers of Serbia, 2011)
This study evaluated the effect of accelerated aging on tensile strength, elongation at break, hardness and Charpy impact strength in commercial PMMA denture base material modified with di-methyl itaconate (DMI) and ...
Development of RuO2/TiO2 titanium anodes and a device for in situ active chlorine generation / Razvoj titanskih RuO2/TiO2 anoda i uređaja za in situ proizvodnju aktivnog hlora
(Association of Chemical Engineers of Serbia, 2013)
Chlorine is used worldwide for water disinfection purposes. However, due to its toxicity the EU has imposed a set of standards that must be applied when transporting and storing chlorine. In Serbia, numerous studies have ...
Wireless system for sleeper vibrations measurement
(Communications - Scientific Letters of the University of Zilina, 2014)
This paper describes testing of a wireless technique for measuring the actual sleeper vibrations and determination of their dynamic deflection based on the experimentally acquired acceleration data. Practical measurements ...
Electrospun Poly(vinylbutyral)/silica Composite Fibres for Impregnation of Aramid Fabrics
(Materiale Plastice, 2014)
The poly (vinyl butyral)/silica (PVB/SiO2) composite fibers were produced by the electrospinning process. The experiments were performed with the PVB solution in concentration of 10 wt.% where ethanol was used as the ...
Controlled production of alginate nanocomposites with incorporated silver nanoparticles aimed for biomedical applications / Kontrolisano dobijanje alginatnih nanokompozita sa inkorporisanim nanočesticama srebra u cilju biomedicinske primene
(Serbian Chemical Society, Belgrade, 2012)
The production of nanocomposite alginate microbeads with electrochemically synthesized silver nanoparticles (AgNPs) based on the electrostatic extrusion technique was investigated with respect to their potentials for ...
Removal of copper(II) ion from aqueous solution by high-porosity activated carbon
(Water Research Commission, Pretoria, 2013)
The removal of copper(II) ion from aqueous solution by the granular activated carbon, obtained from hazelnut shells (ACHS) (Corylus avellana L. var. lunga istriana), was investigated. The ACHS was prepared from ground dried ...
Effects of friction-welding parameters on the morphological properties of an al/cu bimetallic joint
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2016)
The objective of this research is to consider the effects of certain parameters of the friction-welding process on the morphology of an aluminum/copper joint. The effect of the following parameters was monitored: the ...