Претраживање
Приказ резултата 21-30 од 64
Modification of CaCO3 and CaCO3 pin-coated cellulose paper under supercritical carbon dioxide-ethanol mixture for enhanced NO2 capture
(Environmental Science and Pollution Research, 2022)
In this work, we examine two modifications of fine-ground calcium carbonate material (GCC) in order to enhanced sorption of NO2 and subsequent reaction properties toward NO2-/NO3- formation by firstly exposing the GCC to ...
Multipurpose Nonwoven Viscose/Polypropylene Fabrics: Effect of Fabric Characteristics and Humidity Conditions on the Volume Electrical Resistivity and Dielectric Loss Tangent
(Korean Fiber Society, 2020)
In this work, the volume electrical resistivity and dielectric loss tangent of viscose/polypropylene multipurpose nonwoven fabrics were examined. According to the obtained results, the changes in the volume electrical ...
Synthesis, characterization and SAR studies of bis(imino)pyridines as antioxidants, acetylcholinesterase inhibitors and antimicrobial agents
(Academic Press Inc Elsevier Science, San Diego, 2020)
In this study we synthesized a series of sixteen bis(imino)pyridines (BIPs) starting from 2,6-diaminopyridine and various aromatic aldehydes, and evaluated their antioxidant, antibacterial, antifungal and acetylcholinesterase ...
Review on Adhesives and Surface Treatments for Structural Applications: Recent Developments on Sustainability and Implementation for Metal and Composite Substrates
(Materials, 2020)
Using adhesives for connection technology has many benefits. It is cost-efficient, fast, and allows homogeneous stress distribution between the bonded surfaces. This paper gives an overview on the current state of knowledge ...
Crystal growth of la(2)srb(10)o(19)from undercooled melt
(Springer, Dordrecht, 2020)
The crystal growth rate of La(2)SrB(10)O(19)in an undercooled melt of stoichiometric composition was studied. The crystallization of the bulk samples was performed in a single-stage regime under isothermal conditions at ...
Enhanced Interface Adhesion by Novel Eco-Epoxy Adhesives Based on the Modified Tannic Acid on Al and CFRP Adherends
(MDPI, Basel, 2020)
This paper presents a new process for obtaining eco-epoxide adhesives synthesized from bio-renewable raw material (tannic acid-TA) and used for bonding lightweight materials (aluminum (Al) and carbon fiber reinforced polymer ...
Numerical determination and experimental validation of the fracture toughness of welded joints
(Pergamon-Elsevier Science Ltd, Oxford, 2020)
Most of the serious weldment failures lead to catastrophic consequences in terms of damage of other equipment, loss of production, and risks to workers' health and safety. Hence, there is motivation to find margin between ...
Waste Jute Fabric as a Biosorbent for Heavy Metal Ions from Aqueous Solution
(Korean Fiber Soc, Seoul, 2020)
The influence of the chemical composition on the biosorption potential of waste jute fabric for Ni2+, Cu2+, and Zn(2+)was investigated. The raw jute fabric was treated with sodium hydroxide or sodium chlorite to selectively ...
Application of the Flotation Tailings as an Alternative Material for an Acid Mine Drainage Remediation: A Case Study of the Extremely Acidic Lake Robule (Serbia)
(MDPI, Basel, 2020)
Flotation tailings rich in carbonate minerals from the tailings deposit of the copper mine Majdanpek (Serbia) were applied for neutralization of the water taken from the extremely acidic Lake Robule (Bor, Serbia). Tests ...
Development of Coated Electrodes with Solid Wire and Flux-Cored Alloyed Wire for Microalloyed Steel Welding
(MDPI, Basel, 2020)
In this paper, we will present our investigation of the quality of J55 microalloyed steel welds that were formed by a basic flux-cored wire electrodes that were of appropriate quality and alloyed with Ni and Mo. Based on ...