Претраживање
Приказ резултата 11-20 од 71
Short-circuit oxygen diffusion in thermally grown silica layer
(World Scientific Publ Co Pte Ltd, Singapore, 2010)
Amorphous polymer-derived Si-C-N ceramics can be doped with different elements (Al, B etc.) through various pre-ceramic polymer routes. Thus, controlling of the high temperature oxidation resistance can be achieved on an ...
Solubility in K+-Na+-Mg (4) (2-) aqueous solution at T=298.15 K
(Maik Nauka/Interperiodica/Springer, New York, 2013)
In the salt solubility predictions for K+-Na+-Mg (4) (2-) aqueous solution the treatment of thermodynamic data of three-component systems at T = 298.15 K involved the application of the Extended Pitzer's ion-interaction ...
Synthesis of mesoporous nanocrystalline titania powders by nonhydrolitic sol-gel method
(Academic Press Ltd- Elsevier Science Ltd, London, 2009)
Mesoporous titania with well-crystallized anatase phase was synthesized by nonhydrolytic sol-gel process combined with solvothermal treatment. Titanium-isopropoxide, titanium-tetrachloride, and carbon-tetrachloride were ...
Field performance of micropropagated rubus species
(Acta Scientiarum Polonorum, Hortorum Cultus, 2016)
The objective of this study was to test yield and fruit quality of the red raspberry 'Meeker' and the blackberry 'Cacanska Bestrna' propagated using the standard method (ST) and in vitro, by tissue culture (TC). The monitored ...
Influence of picosecond laser pulses on the microstructure of austenitic materials
(Springer, New York, 2011)
We investigate samples of austenitic materials - stainless steel and iron-based superalloy - which are widely used at high temperatures and pressures. The samples were exposed to Nd(3+):YAG laser pulses with a wavelength ...
Electrospun Poly(vinylbutyral)/silica Composite Fibres for Impregnation of Aramid Fabrics
(Materiale Plastice, 2014)
The poly (vinyl butyral)/silica (PVB/SiO2) composite fibers were produced by the electrospinning process. The experiments were performed with the PVB solution in concentration of 10 wt.% where ethanol was used as the ...
Electrochemical decolorization of CI Acid Orange 3 in the presence of sodium chloride at iridium oxide electrode
(Springer International Publishing Ag, Cham, 2017)
The electrocatalytic degradation of C.I. Acid Orange 3 from simulated wastewater by indirect electrochemical oxidation using an IrOx electrode was investigated. The effects of different operating parameters on the rate of ...
Quantitative Structure-Retention Relationships Modeling and Multivariate Data Analysis of Lipophilicity Data of New Spirohydantoin Derivatives
(Akademiai Kiado Zrt, Budapest, 2016)
Modeling properties of newly synthesized compounds is important for both understanding their activity and predicting their interactions. This paper describes the evaluation of the lipophilicity of the newly synthesized ...
Differences in the mode of thermomechanical processing between white gold alloys to produce semi-finished products
(Bulgarian Acad Science, Sofia, 2015)
The results of the investigation of the reduction degree on the hardness of a gold sample with chemical composition Au58,5Ag15Cu9,5Ni9Zn5Pd3 for old white gold alloy and Au58,5Ag18Cu10,5Ga8Zn5 (wt %) for new white gold ...
Raman spectroscopy study of anodic film on Ag43Cu37Zn20 alloy
(Natl Inst Optoelectronics, Bucharest-Magurele, 2016)
The objective of this study was characterization of anodic film obtained when Ag43Cu37Zn20 alloy was treated electrochemically in 3.5% wt. NaCI under potentiostatic conditions. At the potential of +0.25 V a complex multilayer ...