Претраживање
Приказ резултата 101-110 од 133
Antimicrobial oxidized hemp fibers with incorporated silver particles / Antimikrobna tempo-oksidisana vlakna konoplje sa inkorporisanim česticama srebra
(Serbian Chemical Society, Belgrade, 2012)
In this study, antimicrobial silver-loaded hemp fibers were prepared by selective TEMPO-mediated oxidation, i.e., oxidation with sodium hypochlorite, catalytic amount of sodium bromide and the 2,2,6,6-tetramethylpipe-ridine-1-oxy ...
Mechanical properties of composites based on unsaturated polyester resins obtained by chemical recycling of poly(ethylene terephthalate) / Mehanička svojstva kompozita na bazi nezasićenih poliestarskih smola dobijenih hemijskom reciklažom poli(etilen-tereftalata)
(Association of Chemical Engineers of Serbia, 2013)
Composites based on unsaturated polyester (UPe) resins and fumed silica AEROSIL® RY 50, NY 50, RX 50 and NAX 50, as well as graphite, TiO2 or organically modified clay CLOISITE 30B were prepared in order to investigate the ...
Obezbeđenje kvaliteta podataka o emisijama zagađujućih materija u vazduh iz energetskih postrojenja u Republici Srbiji / Quality assurance of the Serbian national E-PRTR register reported data for large combustion plants
(Association of Chemical Engineers of Serbia, 2012)
U periodu od 2007. do 2009. godine, a radi kontrole i ograničenja emisije iz industrije u
skladu sa Pravilnikom o metodologiji za izradu integralnog katastra zagađivača, za potrebe
Integralnog katastra zagađivača niz ...
Solid state synthesis of extra phase-pure Li4Ti5O12 spinel
(Belgrade : International Institute for the Science of Sintering, 2011)
Extra phase-pure Li4Ti5O12 spinel with particle sizes less than 500 nm was synthesized by solid state reaction of mechanochemicaly activated mixture of nano anatase and Li2CO3 for a very short annealing time, 4 h at 800°C. ...
Improvement of cavitation resistance of composite films using functionalized alumina particles
(Savez hemijskih inženjera, Beograd, 2018)
Composite films having the UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as a matrix and the ferrous oxide doped alumina (Al2O3 Fe) based particles were prepared and subjected ...
Influence of material velocity on heat generation during linear welding stage of friction stir welding
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2016)
The heat generated during friction stir welding process depends on plastic deformation of the material and friction between the tool and the material. In this work, heat generation is analysed with respect to the material ...
In vitro biocompatibility assessment of Co-Cr-Mo dental cast alloy
(Srpsko hemijsko društvo, Beograd, 2015)
Metallic materials, such as Co-Cr-Mo alloys, are exposed to aggressive conditions in the oral cavity that represents an ideal environment for metallic ion release and biodegradation. The metallic ions released from dental ...
Stimuli-Sensitive Hydrogel Based on N-Isopropylacrylamide and Itaconic Acid for Entrapment and Controlled Release of Candida rugosa Lipase under Mild Conditions
(Hindawi Ltd, London, 2014)
Stimuli responsive pH- and temperature-sensitive hydrogel drug delivery systems, as those based on N-isopropylacrylamide (NiPAAm) and itaconic acid (IA), have been attracting much of the attention of the scientific community ...
Design of anti-tarnish sterling silver ag-cu-zn alloy and investigation of silicon addition influence on mechanical and corrosion characteristics / Dizajn legura sterling srebra Ag-Cu-Zn otpornih na tamnjenje i ispitivanje uticaja dodatka silicijuma na mehaničke i korozione karakteristike
(Association of the Chemical Engineers of Serbia, 2018)
This paper presents investigations of the influence of silicon addition on the mechanical and corrosion characteristics of the sterling silver Ag-Cu-Zn alloys. The procedure for obtaining Ag-Cu-Zn-Si alloys in small ranges ...
Multi-criteria analysis of synthesis methods for ni-based catalysts
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2016)
Catalysts based on the Ni/Al2O3 system are used in a variety of catalytic processes. Catalysts are commonly synthesized through thermochemical routes (impregnation, precipitation, coprecipitation and others). The authors ...