Search
Now showing items 111-120 of 132
Obezbeđenje kvaliteta podataka o emisijama zagađujućih materija u vazduh iz energetskih postrojenja u Republici Srbiji / Quality assurance of the Serbian national E-PRTR register reported data for large combustion plants
(Association of Chemical Engineers of Serbia, 2012)
U periodu od 2007. do 2009. godine, a radi kontrole i ograničenja emisije iz industrije u
skladu sa Pravilnikom o metodologiji za izradu integralnog katastra zagađivača, za potrebe
Integralnog katastra zagađivača niz ...
Quality of fermented whey beverage with milk
(Savez hemijskih inženjera, Beograd, 2016)
One of the most economical ways of whey processing is the production of beverages, which represents a single process that exploits all the potential of whey as a raw material. Functional and sensory characteristics of ...
Graphene Based Composite Hydrogel for Biomedical Applications
(Croatian Chemical Soc, Zagreb, 2017)
In this work, composite hydrogel consisting of poly(vinyl alcohol), graphene and silver nanoparticles, (Ag/PVA/Gr), was prepared by the immobilization of silver nanoparticles (AgNPs) in PVA/Gr hydrogel matrix in two steps. ...
The influence of powder feed rate on mechanical properties of atmospheric plasma spray (APS) Al-12Si coating
(Walter de Gruyter Gmbh, Berlin, 2019)
In this paper, structural and mechanical properties of APS - atmospheric plasma spray coating Al-12Si are presented. The aim of the research was the optimisation of the flow of powder to produce layers with optimal mechanical ...
Improvement of cavitation resistance of composite films using functionalized alumina particles
(Savez hemijskih inženjera, Beograd, 2018)
Composite films having the UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as a matrix and the ferrous oxide doped alumina (Al2O3 Fe) based particles were prepared and subjected ...
Mechanical properties of composites based on unsaturated polyester resins obtained by chemical recycling of poly(ethylene terephthalate) / Mehanička svojstva kompozita na bazi nezasićenih poliestarskih smola dobijenih hemijskom reciklažom poli(etilen-tereftalata)
(Association of Chemical Engineers of Serbia, 2013)
Composites based on unsaturated polyester (UPe) resins and fumed silica AEROSIL® RY 50, NY 50, RX 50 and NAX 50, as well as graphite, TiO2 or organically modified clay CLOISITE 30B were prepared in order to investigate the ...
Image analysis as a useful tool for fast detection of dimensional and structural changes of poly(ethylene terephthalate) containers
(Savez hemijskih inženjera, Beograd, 2018)
The aim of this paper is to present image analysis as a useful technique for fast, reliable and non-destructive detection of dimensional and structural changes in polymers. The possibility of applying image analysis was ...
New spirohydantoins derived from beta-tetralone: design, synthesis and evaluation of their pharmacokinetically relevant propertie
(Savez hemijskih inženjera, Beograd, 2019)
To create new anticonvulsant drugs, two series of spirohydantoins derived from beta-tetralone bearing a 4-substituted benzyl group (1a-1g) or a 2-(4-substituted phenyl)-2-oxoethyl group (2a-2f) in position 3 of the hydantoin ...
Improving the synthesis process of tribological materials based on tin sulphides by adding graphite as additive
(Srpsko hemijsko društvo, Beograd, 2019)
The aim of this research was to study the effect of graphite addition in the process of synthesis of tribological materials based on tin sulphides. The tin sulphides powders were synthesized from selected precursors by ...
Immobilization of Chaga extract in alginate beads for modified release: simplicity meets efficiency
(Savez hemijskih inženjera, Beograd, 2019)
Chaga (Inonotus obliquus) is a parasitic fungus, which has been used in traditional medicine in Russia and other northern European countries in the treatment of cancer, gastrointestinal andliver diseases. It has been a ...