Претраживање
Приказ резултата 21-30 од 33
Vibration measurements using a wireless sensors network
(Union of Engineers and Technicians of Serbia, 2013)
Non-destructive structural health monitoring of civil engineering structures is based on vibrations masurements of objects during dynamic tests or during theirexploitation. Wireless sensor networks are increasingly being ...
INTERGRANULAR CORROSION OF WELDED JOINTS. FORMING CONDITIONS AND PROCEDURES FOR PREVENTION
(INTEGRITET I VEK KONSTRUKCIJA, 2013)
The paper describes structural changes in the welded joints, leading to the emergence of intergranular corrosion (IGC) during exploitation. The occurrence of intergranular corrosion in welded joints of austenitic, ferritic ...
Mechanical properties of composites based on unsaturated polyester resins obtained by chemical recycling of poly(ethylene terephthalate) / Mehanička svojstva kompozita na bazi nezasićenih poliestarskih smola dobijenih hemijskom reciklažom poli(etilen-tereftalata)
(Association of Chemical Engineers of Serbia, 2013)
Composites based on unsaturated polyester (UPe) resins and fumed silica AEROSIL® RY 50, NY 50, RX 50 and NAX 50, as well as graphite, TiO2 or organically modified clay CLOISITE 30B were prepared in order to investigate the ...
Heat generation during plunge stage in friction stir welding
(Vinca Institute of Nuclear Sciences, 2013)
This paper deals with the heat generation in the Al alloy Al2024-T3 plate under different rotating speeds and plunge speeds during the plunge stage of friction stir welding. A 3-D finite element model is developed in the ...
The effects of aging on the precipitation of the W-rich phase in the matrix of the 92.5W-5Ni-2,5Fe powder metallurgy heavy alloys
(Association of Metallurgical Engineers of Serbia (AMES), Beograd, 2013)
The precipitation behavior of W-rich phase on the specific matrix locations of
Co-free and Co-containing 92.5W-5Ni-2.5Fe heavy alloys is investigated during
aging of the as-quenched samples. The aging treatment is ...
Analysis of compressor valves bolts failure
(The Bulletin of the National R&D Institute for Welding and Material Testing - ISIM Timişoara, Romania, 2013)
Analysis of mechanical and structural properties of micro alloyed steel welded joints depending on quality of cored wire
(University of Osijek, Tech Fac, Slavonski Brod, 2013)
The aim of this study was to master new quality cored wires made of steel strips and the cores filled with metal powders and low molecular hydrophobic compounds. For experimental research, the specimens were made of micro ...
Change of temperature and vertical force during friction stir welding / Promena temperature i vertikalne sile tokom procesa zavarivanja trenjem mešanjem
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2013)
The aim of this paper is to analyze changes of vertical force and temperature during friction stir welding process of high strength aluminum alloys (2024 T3). FSW process is a complex nonlinear process accompanied by large ...
Experimental laboratory for development of fillers and auxiliary materials for welding and soldering / Eksperimentalna laboratorija za razvoj dodatnih i pomoćnih materijala za zavarivanje i lemljenje
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2013)
The development of new materials and their use in construction of modern devices and structures requires the development of fillers and auxiliary materials for their joining. Development and mastering of production of ...