Pretraživanje
Prikaz rezultata 1-10 od 227
In vitro biocompatibility assessment of Co-Cr-Mo dental cast alloy
(Srpsko hemijsko društvo, Beograd, 2015)
Metallic materials, such as Co-Cr-Mo alloys, are exposed to aggressive conditions in the oral cavity that represents an ideal environment for metallic ion release and biodegradation. The metallic ions released from dental ...
Analysis of the tool plunge in friction stir welding comparison of aluminum alloys 2024 t3 and 2024 t351
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2016)
Temperature, plastic strain and heat generation during the plunge stage of the friction stir welding of high-strength aluminum alloys 2024 T3 and 2024 T351 are considered in this work. The plunging of the tool into the ...
Obezbeđenje kvaliteta podataka o emisijama zagađujućih materija u vazduh iz energetskih postrojenja u Republici Srbiji / Quality assurance of the Serbian national E-PRTR register reported data for large combustion plants
(Association of Chemical Engineers of Serbia, 2012)
U periodu od 2007. do 2009. godine, a radi kontrole i ograničenja emisije iz industrije u
skladu sa Pravilnikom o metodologiji za izradu integralnog katastra zagađivača, za potrebe
Integralnog katastra zagađivača niz ...
Solid state synthesis of extra phase-pure Li4Ti5O12 spinel
(Belgrade : International Institute for the Science of Sintering, 2011)
Extra phase-pure Li4Ti5O12 spinel with particle sizes less than 500 nm was synthesized by solid state reaction of mechanochemicaly activated mixture of nano anatase and Li2CO3 for a very short annealing time, 4 h at 800°C. ...
Characterisation of biomedical titanium layers deposited by a vacuum plasma spray process
(Materiali in Tehnologije, 2021)
In this paper we will describe the process of the deposition of thick layers of VPS-Ti coating, which is used as a bonding layer for the upper porous Ti coatings on implant substrates. In order to deposit the powder, we ...
Liquid transfer properties of textile fabrics as a function of moisture content
(Savez hemijskih inženjera, Beograd, 2020)
Liquid transport in textile fabrics determines thermal comfort during high physical activity of a person when liquid perspiration is produced and needs to be transferred away from the skin to keep the thermal balance. In ...
Improvement of cavitation resistance of composite films using functionalized alumina particles
(Savez hemijskih inženjera, Beograd, 2018)
Composite films having the UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as a matrix and the ferrous oxide doped alumina (Al2O3 Fe) based particles were prepared and subjected ...
Kinetic and isotherm studies for the biosorption of nickel ions by jute fabrics
(Journal of the Serbian Chemical Society, 2021)
Raw jute fabric was chemically modified with 1 % NaOH for 30 min, 17.5 % NaOH for 5 min or with 0.7 % NaClO2 for 30 and 60 min to study the influence of changes in the chemical composition of the fabrics and quantity of ...
Ultrasonographic assessment of the maxillary artery and middle meningeal artery in the infratemporal fossa
(John Wiley and Sons Inc, 2019)
Purpose: To investigate with Doppler ultrasonography the maxillary and middle meningeal arteries in the infratemporal fossa, and describe their hemodynamic characteristics. Methods: We included 24 female and 11 male ...
Mechanical and structural characteristics of atmospheric plasma-sprayed multifunctional tio2 coatings
(Materiali in Tehnologije, 2020)
Titanium dioxide (TiO2) is a multifunctional oxide that is an interesting material for many technological applications. This paper presents the mechanical properties and microstructure of TiO2 coatings resistant to dry ...