Претраживање
Приказ резултата 1-10 од 32
A study of the removal of copper ions from aqueous solution using clinoptilolite from Serbia
(Springer, New York, 2011)
Toxic metal contamination of waste waters can be mitigated by metal adsorption to clay and zeolitic minerals, but in developing countries such environmental remediation can be cost prohibitive if these minerals are not ...
Application of electrochemical methods for the investigation of intergranular corrosion of welded joint of austenitic stainless steel 19cr-9ni
(Savez hemijskih inženjera, Beograd, 2011)
The sensitization degree of austenitic stainless steel welded joints was investigated by electrochemical methods of the double loop electrochemical potentiokinetic reactivation (DL EPR) in H(2)SO(4) + KSCN solution, and ...
The enzyme separation plant modelling, design and optimization
(International Journal of Mathematical Models and Methods in Applied Sciences, 2011)
A new approach for plant model building was illustrated. The use of flowsheeting in design, however, differs from its use in operations and this should be reflected in the development of the simulation procedure. In design, ...
Influence of Microwave Heating on the Polymerization Kinetics and Application Properties of the PMMA Dental Materials
(Wiley, Hoboken, 2011)
The effects of heating mode (conventional isothermal heating (CIH) and microwave isothermal heating (MWIH) on the kinetics of polymerization and the properties important for the application (residual monomer, hardness, and ...
Distribution of loads of cycloid speed reducer
(University of Timisoara, Transactions on Mechanics, 2011)
Cycloidal speed reducer belongs to the generation of modern planetary gears. It main features are:
high transmission ratio, compact design, long and reliable working life, high efficiency, possibility of accepting
big ...
Solid state synthesis of extra phase-pure Li4Ti5O12 spinel
(Belgrade : International Institute for the Science of Sintering, 2011)
Extra phase-pure Li4Ti5O12 spinel with particle sizes less than 500 nm was synthesized by solid state reaction of mechanochemicaly activated mixture of nano anatase and Li2CO3 for a very short annealing time, 4 h at 800°C. ...
DETERMINATION OF THERMAL CONDUCTIVITY OF THE INSULATION MATERIALS USING NUMERICAL CALCULATION OF THE PRESSURE INCREASE
(Materials Research Society of Serbia, Crna Gora, 2011)
In the paper is presented the possibility of determination thermal conductivity for the
insulation materials, which are used in the tanks for liquid carbon dioxide, in situ. For this
purpose, was developed the mathematical ...
The analysis of stability of the electrospinning process of forming PVB-SiO2 nanocomposite fibers
(Belgrade : Materials Research Society of Serbia, 2011)
The PVB-SiO2 composite nanofibers were obtained by the electrospinning process. The experiments were carried out with PVB solution in concentration of 10 wt% where as the solvent was used ethanol. The silica nanoparticles ...
Structural and mechanical properties of different hard welded coatings for impact plate for ventilation mill
(SUDURA publising house, Rumunija, 2011)
Ventilation mill for grinding coal is one of the main steam
power plants in the system that makes a significant influence
on the level of energy efficiency with its work. Working
parts of the device during exploitation ...
Mreža bežičnih senzora za merenje vibracija na građevinskim objektima
(Društvo Metrologa Srbije, 2011)
Nedestruktivno praćenje stanja građevinskih objekata se bazira na merenju vibracija objekata pri dinamičkim ispitivanjima ili u toku njihove eksploatacije. U ovu svrhu se sve više koriste mreže bežičnih senzora (WSN) koje ...