TY  - CONF
AU  - Polić, Suzana
AU  - Srećković, Milesa
AU  - Stević, Zoran
AU  - Malović, Miodrag
AU  - Đurić, Miloš
PY  - 2022
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6036
AB  - Heritološki fenomeni u oblasti istraživanja kompozitnih umetničkih dela, u vezi sa raznovrsnošću pristupa u kvalitativnim i kvantitativnim kriterijumima za izbor materijala, postavljaju složene zadatke u primeni instrumentalnih metoda, koje prethode izradi protokola za konzervaciju-restauraciju predmeta kulturne baštine. U ovom radu u fokusu je problem heritološke abdukcije, u heurističkoj proceni broja neophodnih analiza, odnosno deficita podataka u fragmentarnim strukturama koje su izraz umetničkog spontaniteta, a sa akcentom na fenomen praemissa minor u traganju za metodološki čvrstom platformom za interpretaciju podataka.
PB  - Društvo za ETRAN
C3  - Zbornik radova LXVI konferencije ETRAN
T1  - Problem heritološke abdukcije u vezi sa instrumentalnim analizama materijala kulturne baštine
EP  - 905
SP  - 900
UR  - https://hdl.handle.net/21.15107/rcub_technorep_6036
ER  - 

@conference{
author = "Polić, Suzana and Srećković, Milesa and Stević, Zoran and Malović, Miodrag and Đurić, Miloš",
year = "2022",
abstract = "Heritološki fenomeni u oblasti istraživanja kompozitnih umetničkih dela, u vezi sa raznovrsnošću pristupa u kvalitativnim i kvantitativnim kriterijumima za izbor materijala, postavljaju složene zadatke u primeni instrumentalnih metoda, koje prethode izradi protokola za konzervaciju-restauraciju predmeta kulturne baštine. U ovom radu u fokusu je problem heritološke abdukcije, u heurističkoj proceni broja neophodnih analiza, odnosno deficita podataka u fragmentarnim strukturama koje su izraz umetničkog spontaniteta, a sa akcentom na fenomen praemissa minor u traganju za metodološki čvrstom platformom za interpretaciju podataka.",
publisher = "Društvo za ETRAN",
journal = "Zbornik radova LXVI konferencije ETRAN",
title = "Problem heritološke abdukcije u vezi sa instrumentalnim analizama materijala kulturne baštine",
pages = "905-900",
url = "https://hdl.handle.net/21.15107/rcub_technorep_6036"
}

Polić, S., Srećković, M., Stević, Z., Malović, M.,& Đurić, M.. (2022). Problem heritološke abdukcije u vezi sa instrumentalnim analizama materijala kulturne baštine. in Zbornik radova LXVI konferencije ETRAN
Društvo za ETRAN., 900-905.
https://hdl.handle.net/21.15107/rcub_technorep_6036

Polić S, Srećković M, Stević Z, Malović M, Đurić M. Problem heritološke abdukcije u vezi sa instrumentalnim analizama materijala kulturne baštine. in Zbornik radova LXVI konferencije ETRAN. 2022;:900-905.
https://hdl.handle.net/21.15107/rcub_technorep_6036 .

Polić, Suzana, Srećković, Milesa, Stević, Zoran, Malović, Miodrag, Đurić, Miloš, "Problem heritološke abdukcije u vezi sa instrumentalnim analizama materijala kulturne baštine" in Zbornik radova LXVI konferencije ETRAN (2022):900-905,
https://hdl.handle.net/21.15107/rcub_technorep_6036 .

TY  - CONF
AU  - Vlahović, Milica
AU  - Savić, Aleksandar
AU  - Martinović, Sanja
AU  - Đorđević, Nataša
AU  - Stević, Zoran
AU  - Volkov-Husović, Tatjana
PY  - 2020
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4415
AB  - Electric power in Serbia is predominantly provided by thermal power plants. All of eleven existing thermal power plants in Serbia use coal, mainly lignite in the electricity production process thus generating about 6 million tons of fly ash per year. The estimated amount of fly ash from thermal power plants accumulated in Serbian landfills exceeds 200 million tons. On the other hand, during the last decades, respecting the principles of ecologically sustainable development has been imposed on industries, and one of them is the construction industry. Due to the presence of amorphous SiO2 and Al2O3, fly ash as pozzolanic material is convenient for the production of concrete and mortar. Consequently, multiple positive effects can be expected by the proper consumption of fly ash- reducing landfills and improving concrete properties. The idea of this study is to analyze the possibility of recycling fly ash from a thermal power plant by replacing a part of common mineral filler- limestone in the production of self-compacting concrete (SCC). Properties of conventional SCC with limestone and compositions with different fly ash content were compared. Considering that requirements for SCC should be satisfied and all properties remain or enhance in the case of fly ash addition, this study proved that all designed concretes can be used for structural applications.
AB  - Električnu energiju u Srbiji pretežno obezbeđuju termoelektrane. Svih jedanaest termoelektrana u Srbiji koriste ugalj, uglavnom lignit u procesu proizvodnje električne energije, čime se godišnje generiše oko 6 miliona tona letećeg pepela. Procenjena količina letećeg pepela iz termoelektrana akumulirana na deponijama u Srbiji prelazi 200 miliona tona. S druge strane, poslednjih decenija poštovanje principa ekološki održivog razvoja nametnuto je industrijama, a jedna od njih je i građevinska. Zahvaljujući prisustvu amorfnog SiO2 i Al2O3, pepeo kao pucolanski materijal pogodan je za proizvodnju betona i maltera. Zbog toga se pravilnom upotrebom letećeg pepela mogu očekivati višestruki pozitivni efekti- smanjenje deponija i poboljšanje svojstava betona. Ideja ovog istraživanja je analiziranje mogućnosti recikliranja letećeg pepela iz termoelektrane tako što će delimično zameniti uobičajeni mineralni punioc- krečnjak u proizvodnji samozbijajućeg betona (SCC). Upoređena su svojstva konvencionalnog SCC sa krečnjakom i kompozicija sa različitim sadržajem pepela. S obzirom da je u slučaju dodatka letećeg pepela potrebno da budu zadovoljeni zahtevi za SCC, kao i da svojstva betona ostanu ista ili poboljšana, ova studija je pokazala da se sve dizajnirane smeše mogu koristiti za konstrukcijske primene.
PB  - Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS
C3  - Proceedings - 8th International Conference on Renewable Electrical Power Sources
T1  - Enhancing properties of concrete by addition of fly ash from a thermal power plant for application in geothermal systems
T1  - Poboljšanje svojstava betona dodatkom letećeg pepela iz termoelektrane za primenu u geotermalnim sistemima
EP  - 86
SP  - 77
DO  - 10.24094/mkoiee.020.8.1.77
ER  - 

@conference{
author = "Vlahović, Milica and Savić, Aleksandar and Martinović, Sanja and Đorđević, Nataša and Stević, Zoran and Volkov-Husović, Tatjana",
year = "2020",
abstract = "Electric power in Serbia is predominantly provided by thermal power plants. All of eleven existing thermal power plants in Serbia use coal, mainly lignite in the electricity production process thus generating about 6 million tons of fly ash per year. The estimated amount of fly ash from thermal power plants accumulated in Serbian landfills exceeds 200 million tons. On the other hand, during the last decades, respecting the principles of ecologically sustainable development has been imposed on industries, and one of them is the construction industry. Due to the presence of amorphous SiO2 and Al2O3, fly ash as pozzolanic material is convenient for the production of concrete and mortar. Consequently, multiple positive effects can be expected by the proper consumption of fly ash- reducing landfills and improving concrete properties. The idea of this study is to analyze the possibility of recycling fly ash from a thermal power plant by replacing a part of common mineral filler- limestone in the production of self-compacting concrete (SCC). Properties of conventional SCC with limestone and compositions with different fly ash content were compared. Considering that requirements for SCC should be satisfied and all properties remain or enhance in the case of fly ash addition, this study proved that all designed concretes can be used for structural applications., Električnu energiju u Srbiji pretežno obezbeđuju termoelektrane. Svih jedanaest termoelektrana u Srbiji koriste ugalj, uglavnom lignit u procesu proizvodnje električne energije, čime se godišnje generiše oko 6 miliona tona letećeg pepela. Procenjena količina letećeg pepela iz termoelektrana akumulirana na deponijama u Srbiji prelazi 200 miliona tona. S druge strane, poslednjih decenija poštovanje principa ekološki održivog razvoja nametnuto je industrijama, a jedna od njih je i građevinska. Zahvaljujući prisustvu amorfnog SiO2 i Al2O3, pepeo kao pucolanski materijal pogodan je za proizvodnju betona i maltera. Zbog toga se pravilnom upotrebom letećeg pepela mogu očekivati višestruki pozitivni efekti- smanjenje deponija i poboljšanje svojstava betona. Ideja ovog istraživanja je analiziranje mogućnosti recikliranja letećeg pepela iz termoelektrane tako što će delimično zameniti uobičajeni mineralni punioc- krečnjak u proizvodnji samozbijajućeg betona (SCC). Upoređena su svojstva konvencionalnog SCC sa krečnjakom i kompozicija sa različitim sadržajem pepela. S obzirom da je u slučaju dodatka letećeg pepela potrebno da budu zadovoljeni zahtevi za SCC, kao i da svojstva betona ostanu ista ili poboljšana, ova studija je pokazala da se sve dizajnirane smeše mogu koristiti za konstrukcijske primene.",
publisher = "Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS",
journal = "Proceedings - 8th International Conference on Renewable Electrical Power Sources",
title = "Enhancing properties of concrete by addition of fly ash from a thermal power plant for application in geothermal systems, Poboljšanje svojstava betona dodatkom letećeg pepela iz termoelektrane za primenu u geotermalnim sistemima",
pages = "86-77",
doi = "10.24094/mkoiee.020.8.1.77"
}

Vlahović, M., Savić, A., Martinović, S., Đorđević, N., Stević, Z.,& Volkov-Husović, T.. (2020). Enhancing properties of concrete by addition of fly ash from a thermal power plant for application in geothermal systems. in Proceedings - 8th International Conference on Renewable Electrical Power Sources
Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS., 77-86.
https://doi.org/10.24094/mkoiee.020.8.1.77

Vlahović M, Savić A, Martinović S, Đorđević N, Stević Z, Volkov-Husović T. Enhancing properties of concrete by addition of fly ash from a thermal power plant for application in geothermal systems. in Proceedings - 8th International Conference on Renewable Electrical Power Sources. 2020;:77-86.
doi:10.24094/mkoiee.020.8.1.77 .

Vlahović, Milica, Savić, Aleksandar, Martinović, Sanja, Đorđević, Nataša, Stević, Zoran, Volkov-Husović, Tatjana, "Enhancing properties of concrete by addition of fly ash from a thermal power plant for application in geothermal systems" in Proceedings - 8th International Conference on Renewable Electrical Power Sources (2020):77-86,
https://doi.org/10.24094/mkoiee.020.8.1.77 . .

TY  - CONF
AU  - Savić, Aleksandar
AU  - Stević, Zoran
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Volkov-Husović, Tatjana
PY  - 2020
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4404
AB  - Usled hemijske reakcije Portland cementa, koja se uvek javlja u betonu prilikom očvršćavanja, izvesna količina toplote se razvija. Ova toplota mora biti kvantifikovana, obzirom da ona može oštetiti beton ili pomoći mu, zavisno od komponenata betona, elementa konstrukcije, uslova sredine i gradilišta. Postoji veći broj postavki za monitoring toplote hidratacije, od kojih su dve primenjene u slučaju prikazanom u ovom radu. Četiri vrste betona su praćene pomoću pomenute dve tehnike u trajanju od 24 sata. Prva upotrebljena postavka koja je upotrebljena je termovizijska kamera, pomoću koje je praćena površina, a druga je termosenzor – upotrebljena za monitoring unutrašnjosti sveže betonske mase koja je očvršćavala. Potencijal primenjene postavke leži u jednostavnosti montiranja, niskoj ceni i mogućnostima za masovnu upotrebu, što može značajno doprineti monitoringu i preduprediti podbačaj betona.
PB  - Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS
C3  - Proceedings - 8th International Conference on Renewable Electrical Power Sources
T1  - Thermovision monitoring of concrete heat of hydration
T1  - Termovizijski monitoring toplote vlaženja betona
EP  - 50
SP  - 47
DO  - 10.24094/mkoiee.020.8.1.47
ER  - 

@conference{
author = "Savić, Aleksandar and Stević, Zoran and Martinović, Sanja and Vlahović, Milica and Volkov-Husović, Tatjana",
year = "2020",
abstract = "Usled hemijske reakcije Portland cementa, koja se uvek javlja u betonu prilikom očvršćavanja, izvesna količina toplote se razvija. Ova toplota mora biti kvantifikovana, obzirom da ona može oštetiti beton ili pomoći mu, zavisno od komponenata betona, elementa konstrukcije, uslova sredine i gradilišta. Postoji veći broj postavki za monitoring toplote hidratacije, od kojih su dve primenjene u slučaju prikazanom u ovom radu. Četiri vrste betona su praćene pomoću pomenute dve tehnike u trajanju od 24 sata. Prva upotrebljena postavka koja je upotrebljena je termovizijska kamera, pomoću koje je praćena površina, a druga je termosenzor – upotrebljena za monitoring unutrašnjosti sveže betonske mase koja je očvršćavala. Potencijal primenjene postavke leži u jednostavnosti montiranja, niskoj ceni i mogućnostima za masovnu upotrebu, što može značajno doprineti monitoringu i preduprediti podbačaj betona.",
publisher = "Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS",
journal = "Proceedings - 8th International Conference on Renewable Electrical Power Sources",
title = "Thermovision monitoring of concrete heat of hydration, Termovizijski monitoring toplote vlaženja betona",
pages = "50-47",
doi = "10.24094/mkoiee.020.8.1.47"
}

Savić, A., Stević, Z., Martinović, S., Vlahović, M.,& Volkov-Husović, T.. (2020). Thermovision monitoring of concrete heat of hydration. in Proceedings - 8th International Conference on Renewable Electrical Power Sources
Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS., 47-50.
https://doi.org/10.24094/mkoiee.020.8.1.47

Savić A, Stević Z, Martinović S, Vlahović M, Volkov-Husović T. Thermovision monitoring of concrete heat of hydration. in Proceedings - 8th International Conference on Renewable Electrical Power Sources. 2020;:47-50.
doi:10.24094/mkoiee.020.8.1.47 .

Savić, Aleksandar, Stević, Zoran, Martinović, Sanja, Vlahović, Milica, Volkov-Husović, Tatjana, "Thermovision monitoring of concrete heat of hydration" in Proceedings - 8th International Conference on Renewable Electrical Power Sources (2020):47-50,
https://doi.org/10.24094/mkoiee.020.8.1.47 . .

TY  - JOUR
AU  - Stević, Zoran
AU  - Vlahović, Milica
AU  - Martinović, Sanja
AU  - Dimitrijević, Stevan
AU  - Ponomaryova, Elena
AU  - Volkov-Husović, Tatjana
PY  - 2018
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3947
AB  - Pulse-reverse power modes are used in galvanotechniques in order to obtain coatings with better characteristics in terms of gloss, adhesion, tracking sharp edges and uniform distribution of deposits on complex shape objects, compared with the coatings produced by constant current modes. Pulse-reverse modes also allow the use of a higher current density, and thus the production speed of electroplating cells increases. Systems for standard electroplating of copper, silver and gold are optimised by the suitable choice of duration and intensity of the pulses. It is shown that coatings with satisfactory quality can be deposited using higher current density, different modes of pulsed current in a very short period of time, without expensive and often dangerous additives in the electrolyte. Parameters of the model for certain electrochemical systems were determined by modelling and computer simulation, so the system behaviour under different circumstances becomes predictive.
PB  - Carl Hanser Verlag
T2  - International Journal of Materials Research
T1  - Modelling, simulation and optimisation of pulse-reverse regime of copper, silver and gold electrodeposition
EP  - 521
IS  - 6
SP  - 514
VL  - 109
DO  - 10.3139/146.111636
ER  - 

@article{
author = "Stević, Zoran and Vlahović, Milica and Martinović, Sanja and Dimitrijević, Stevan and Ponomaryova, Elena and Volkov-Husović, Tatjana",
year = "2018",
abstract = "Pulse-reverse power modes are used in galvanotechniques in order to obtain coatings with better characteristics in terms of gloss, adhesion, tracking sharp edges and uniform distribution of deposits on complex shape objects, compared with the coatings produced by constant current modes. Pulse-reverse modes also allow the use of a higher current density, and thus the production speed of electroplating cells increases. Systems for standard electroplating of copper, silver and gold are optimised by the suitable choice of duration and intensity of the pulses. It is shown that coatings with satisfactory quality can be deposited using higher current density, different modes of pulsed current in a very short period of time, without expensive and often dangerous additives in the electrolyte. Parameters of the model for certain electrochemical systems were determined by modelling and computer simulation, so the system behaviour under different circumstances becomes predictive.",
publisher = "Carl Hanser Verlag",
journal = "International Journal of Materials Research",
title = "Modelling, simulation and optimisation of pulse-reverse regime of copper, silver and gold electrodeposition",
pages = "521-514",
number = "6",
volume = "109",
doi = "10.3139/146.111636"
}

Stević, Z., Vlahović, M., Martinović, S., Dimitrijević, S., Ponomaryova, E.,& Volkov-Husović, T.. (2018). Modelling, simulation and optimisation of pulse-reverse regime of copper, silver and gold electrodeposition. in International Journal of Materials Research
Carl Hanser Verlag., 109(6), 514-521.
https://doi.org/10.3139/146.111636

Stević Z, Vlahović M, Martinović S, Dimitrijević S, Ponomaryova E, Volkov-Husović T. Modelling, simulation and optimisation of pulse-reverse regime of copper, silver and gold electrodeposition. in International Journal of Materials Research. 2018;109(6):514-521.
doi:10.3139/146.111636 .

Stević, Zoran, Vlahović, Milica, Martinović, Sanja, Dimitrijević, Stevan, Ponomaryova, Elena, Volkov-Husović, Tatjana, "Modelling, simulation and optimisation of pulse-reverse regime of copper, silver and gold electrodeposition" in International Journal of Materials Research, 109, no. 6 (2018):514-521,
https://doi.org/10.3139/146.111636 . .

TY  - JOUR
AU  - Mijailović, Daniel
AU  - Vukčević, Marija
AU  - Stević, Zoran
AU  - Kalijadis, Ana
AU  - Stojanović, Dušica
AU  - Panić, Vladimir
AU  - Uskoković, Petar
PY  - 2017
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3720
AB  - Activated carbons with high specific surface area (even above 2000 m(2) g(-1)) and pronounced microporosity are prepared in two-stage process involving conventional carbonization of waste hemp fibers and subsequent activation by potassium hydroxide. Samples with considerably different surface and intrinsic micro-and mesoporous properties are obtained at different carbonization and activation conditions. The improvements of the capacitive properties are found upon increase in carbonization temperature, since it considerably influenced the specific surface area and the content of surface oxygen groups. Cyclic voltammetry experiments reveal the dependence of specific capacitance on the sweep rate due to the characteristic porous structure of the samples. The highest measured value in 1 M H2SO4 solution is 122 F g(-1). The electrochemical impedance data indicates eight-branch transmission line equivalent electric behavior of activated carbons.
PB  - Electrochemical Soc Inc, Pennington
T2  - Journal of the Electrochemical Society
T1  - Supercapacitive Performances of Activated Highly Microporous Natural Carbon Macrofibers
EP  - A1068
IS  - 6
SP  - A1061
VL  - 164
DO  - 10.1149/2.0581706jes
ER  - 

@article{
author = "Mijailović, Daniel and Vukčević, Marija and Stević, Zoran and Kalijadis, Ana and Stojanović, Dušica and Panić, Vladimir and Uskoković, Petar",
year = "2017",
abstract = "Activated carbons with high specific surface area (even above 2000 m(2) g(-1)) and pronounced microporosity are prepared in two-stage process involving conventional carbonization of waste hemp fibers and subsequent activation by potassium hydroxide. Samples with considerably different surface and intrinsic micro-and mesoporous properties are obtained at different carbonization and activation conditions. The improvements of the capacitive properties are found upon increase in carbonization temperature, since it considerably influenced the specific surface area and the content of surface oxygen groups. Cyclic voltammetry experiments reveal the dependence of specific capacitance on the sweep rate due to the characteristic porous structure of the samples. The highest measured value in 1 M H2SO4 solution is 122 F g(-1). The electrochemical impedance data indicates eight-branch transmission line equivalent electric behavior of activated carbons.",
publisher = "Electrochemical Soc Inc, Pennington",
journal = "Journal of the Electrochemical Society",
title = "Supercapacitive Performances of Activated Highly Microporous Natural Carbon Macrofibers",
pages = "A1068-A1061",
number = "6",
volume = "164",
doi = "10.1149/2.0581706jes"
}

Mijailović, D., Vukčević, M., Stević, Z., Kalijadis, A., Stojanović, D., Panić, V.,& Uskoković, P.. (2017). Supercapacitive Performances of Activated Highly Microporous Natural Carbon Macrofibers. in Journal of the Electrochemical Society
Electrochemical Soc Inc, Pennington., 164(6), A1061-A1068.
https://doi.org/10.1149/2.0581706jes

Mijailović D, Vukčević M, Stević Z, Kalijadis A, Stojanović D, Panić V, Uskoković P. Supercapacitive Performances of Activated Highly Microporous Natural Carbon Macrofibers. in Journal of the Electrochemical Society. 2017;164(6):A1061-A1068.
doi:10.1149/2.0581706jes .

Mijailović, Daniel, Vukčević, Marija, Stević, Zoran, Kalijadis, Ana, Stojanović, Dušica, Panić, Vladimir, Uskoković, Petar, "Supercapacitive Performances of Activated Highly Microporous Natural Carbon Macrofibers" in Journal of the Electrochemical Society, 164, no. 6 (2017):A1061-A1068,
https://doi.org/10.1149/2.0581706jes . .

TY  - JOUR
AU  - Pavlović, Marko D.
AU  - Dojčinović, Marina
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Stević, Zoran
AU  - Jovanović, Marina
AU  - Volkov-Husović, Tatjana
PY  - 2017
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3547
AB  - Mechanical shock of zircon based ceramic induced by cavitation erosion testing was investigated in this study. Several parameters were followed in order to determine level of material degradation during the cavitation erosion testing. Mass loss was taken as a conventional criterion for material degradation, while the level of surface degradation was evaluated by image and thermal imaging analyses. Results show high cavitation resistance of zircon ceramics and their suitability when vigorous cavitation erosion environment is expected.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Determination of Degradation Level during Cavitation Erosion of Zircon Based Ceramic
EP  - 185
IS  - 2
SP  - 175
VL  - 49
DO  - 10.2298/SOS1702175P
ER  - 

@article{
author = "Pavlović, Marko D. and Dojčinović, Marina and Martinović, Sanja and Vlahović, Milica and Stević, Zoran and Jovanović, Marina and Volkov-Husović, Tatjana",
year = "2017",
abstract = "Mechanical shock of zircon based ceramic induced by cavitation erosion testing was investigated in this study. Several parameters were followed in order to determine level of material degradation during the cavitation erosion testing. Mass loss was taken as a conventional criterion for material degradation, while the level of surface degradation was evaluated by image and thermal imaging analyses. Results show high cavitation resistance of zircon ceramics and their suitability when vigorous cavitation erosion environment is expected.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Determination of Degradation Level during Cavitation Erosion of Zircon Based Ceramic",
pages = "185-175",
number = "2",
volume = "49",
doi = "10.2298/SOS1702175P"
}

Pavlović, M. D., Dojčinović, M., Martinović, S., Vlahović, M., Stević, Z., Jovanović, M.,& Volkov-Husović, T.. (2017). Determination of Degradation Level during Cavitation Erosion of Zircon Based Ceramic. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 49(2), 175-185.
https://doi.org/10.2298/SOS1702175P

Pavlović MD, Dojčinović M, Martinović S, Vlahović M, Stević Z, Jovanović M, Volkov-Husović T. Determination of Degradation Level during Cavitation Erosion of Zircon Based Ceramic. in Science of Sintering. 2017;49(2):175-185.
doi:10.2298/SOS1702175P .

Pavlović, Marko D., Dojčinović, Marina, Martinović, Sanja, Vlahović, Milica, Stević, Zoran, Jovanović, Marina, Volkov-Husović, Tatjana, "Determination of Degradation Level during Cavitation Erosion of Zircon Based Ceramic" in Science of Sintering, 49, no. 2 (2017):175-185,
https://doi.org/10.2298/SOS1702175P . .

TY  - JOUR
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Ponomaryova, Elena
AU  - Ryzhkov, I. V.
AU  - Jovanović, M.
AU  - Busatlić, I.
AU  - Volkov-Husović, Tatjana
AU  - Stević, Zoran
PY  - 2017
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3580
AB  - The possibility of applying fly ash from power plants as a binder in supercapacitor electrodes based on activated carbon was investigated in this research. Based on the mechanical and electrical properties of the electrodes, the optimal ratio between fly ash and AC was determined. Supercapacitor electrodes were prepared in two ways: by pressing and by laser solidification. The preparation method significantly affected physical properties of the electrodes as well as the electrochemical behavior in supercapacitor setup. The electrodes were electrochemically tested by galvanostatic and potentiostatic methods and cyclic voltammetry. In order to improve the estimation of supercapacitor parameters, mathematical model that perfectly describes the behavior of investigated electrodes in aqueous solution of sodium nitrate was developed. The best results were obtained with laser-solidified electrode in 1M aqueous solution of NaNO3. Specific capacitance of 105 F/g, serial resistance of 0.57 Omega and self-discharge resistance of 95 Omega were achieved. Stability at high number of cycles proved to be very good. After 2000 cycles of CV at scan rate of 100 mV/s, specific capacitance fell by only 4.6 %.
PB  - Electrochemical Science Group, Beograd
T2  - International Journal of Electrochemical Science
T1  - Electrochemical Behavior of Supercapacitor Electrodes Based on Activated Carbon and Fly Ash
EP  - 7299
IS  - 8
SP  - 7287
VL  - 12
DO  - 10.20964/2017.08.63
ER  - 

@article{
author = "Martinović, Sanja and Vlahović, Milica and Ponomaryova, Elena and Ryzhkov, I. V. and Jovanović, M. and Busatlić, I. and Volkov-Husović, Tatjana and Stević, Zoran",
year = "2017",
abstract = "The possibility of applying fly ash from power plants as a binder in supercapacitor electrodes based on activated carbon was investigated in this research. Based on the mechanical and electrical properties of the electrodes, the optimal ratio between fly ash and AC was determined. Supercapacitor electrodes were prepared in two ways: by pressing and by laser solidification. The preparation method significantly affected physical properties of the electrodes as well as the electrochemical behavior in supercapacitor setup. The electrodes were electrochemically tested by galvanostatic and potentiostatic methods and cyclic voltammetry. In order to improve the estimation of supercapacitor parameters, mathematical model that perfectly describes the behavior of investigated electrodes in aqueous solution of sodium nitrate was developed. The best results were obtained with laser-solidified electrode in 1M aqueous solution of NaNO3. Specific capacitance of 105 F/g, serial resistance of 0.57 Omega and self-discharge resistance of 95 Omega were achieved. Stability at high number of cycles proved to be very good. After 2000 cycles of CV at scan rate of 100 mV/s, specific capacitance fell by only 4.6 %.",
publisher = "Electrochemical Science Group, Beograd",
journal = "International Journal of Electrochemical Science",
title = "Electrochemical Behavior of Supercapacitor Electrodes Based on Activated Carbon and Fly Ash",
pages = "7299-7287",
number = "8",
volume = "12",
doi = "10.20964/2017.08.63"
}

Martinović, S., Vlahović, M., Ponomaryova, E., Ryzhkov, I. V., Jovanović, M., Busatlić, I., Volkov-Husović, T.,& Stević, Z.. (2017). Electrochemical Behavior of Supercapacitor Electrodes Based on Activated Carbon and Fly Ash. in International Journal of Electrochemical Science
Electrochemical Science Group, Beograd., 12(8), 7287-7299.
https://doi.org/10.20964/2017.08.63

Martinović S, Vlahović M, Ponomaryova E, Ryzhkov IV, Jovanović M, Busatlić I, Volkov-Husović T, Stević Z. Electrochemical Behavior of Supercapacitor Electrodes Based on Activated Carbon and Fly Ash. in International Journal of Electrochemical Science. 2017;12(8):7287-7299.
doi:10.20964/2017.08.63 .

Martinović, Sanja, Vlahović, Milica, Ponomaryova, Elena, Ryzhkov, I. V., Jovanović, M., Busatlić, I., Volkov-Husović, Tatjana, Stević, Zoran, "Electrochemical Behavior of Supercapacitor Electrodes Based on Activated Carbon and Fly Ash" in International Journal of Electrochemical Science, 12, no. 8 (2017):7287-7299,
https://doi.org/10.20964/2017.08.63 . .

TY  - JOUR
AU  - Dimitrijević, Silvana
AU  - Rajčić-Vujasinović, Mirjana M.
AU  - Trifunović, Dejan
AU  - Trumić, Biserka
AU  - Stević, Zoran
AU  - Dimitrijević, Stevan
PY  - 2016
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3224
AB  - The aim of this work was to investigate the effects of current density, temperature, pH and concentration of ethyl-hexilsulfonate additive on the microhardness of electrochemically deposited gold decorative coatings obtained from a conventional cyanide electrolyte and gold complex based on mercaptotriazole. Mechanically and chemically prepared brass samples were first nickeled from acidic electrolyte. Nickel was a substrate deposit, and then decorative gold coatings were deposited from two types of electrolytes at different current densities and temperatures. Decorative gold coatings were deposited from auri-mercaptotrizole at different pH values and from electrolyte with and without the ethylhexilsulfonate additive. The microhardness of the gold coating was measured using the Knoop method. The highest values of microhardness were obtained at a current density of 1 A dm(-2) at room temperature for both electrolytes. The microhardness of the gold coatings from cyanide electrolytes was HK = 740 MPa, and the coatings obtained from auri-mercaptotriazole HK = 660 MPa. This difference is not relevant for decorative purposes. The highest values of microhardness, HK = 660 MPa, were obtained at pH = 9 from the gold complex based on mercaptotriazole without the additive.
PB  - Carl Hanser Verlag, Munich
T2  - International Journal of Materials Research
T1  - Microhardness of decorative gold coatings obtained from gold complex based on mercaptotriazole: Comparison with cyanide
EP  - 630
IS  - 7
SP  - 624
VL  - 107
DO  - 10.3139/146.111382
ER  - 

@article{
author = "Dimitrijević, Silvana and Rajčić-Vujasinović, Mirjana M. and Trifunović, Dejan and Trumić, Biserka and Stević, Zoran and Dimitrijević, Stevan",
year = "2016",
abstract = "The aim of this work was to investigate the effects of current density, temperature, pH and concentration of ethyl-hexilsulfonate additive on the microhardness of electrochemically deposited gold decorative coatings obtained from a conventional cyanide electrolyte and gold complex based on mercaptotriazole. Mechanically and chemically prepared brass samples were first nickeled from acidic electrolyte. Nickel was a substrate deposit, and then decorative gold coatings were deposited from two types of electrolytes at different current densities and temperatures. Decorative gold coatings were deposited from auri-mercaptotrizole at different pH values and from electrolyte with and without the ethylhexilsulfonate additive. The microhardness of the gold coating was measured using the Knoop method. The highest values of microhardness were obtained at a current density of 1 A dm(-2) at room temperature for both electrolytes. The microhardness of the gold coatings from cyanide electrolytes was HK = 740 MPa, and the coatings obtained from auri-mercaptotriazole HK = 660 MPa. This difference is not relevant for decorative purposes. The highest values of microhardness, HK = 660 MPa, were obtained at pH = 9 from the gold complex based on mercaptotriazole without the additive.",
publisher = "Carl Hanser Verlag, Munich",
journal = "International Journal of Materials Research",
title = "Microhardness of decorative gold coatings obtained from gold complex based on mercaptotriazole: Comparison with cyanide",
pages = "630-624",
number = "7",
volume = "107",
doi = "10.3139/146.111382"
}

Dimitrijević, S., Rajčić-Vujasinović, M. M., Trifunović, D., Trumić, B., Stević, Z.,& Dimitrijević, S.. (2016). Microhardness of decorative gold coatings obtained from gold complex based on mercaptotriazole: Comparison with cyanide. in International Journal of Materials Research
Carl Hanser Verlag, Munich., 107(7), 624-630.
https://doi.org/10.3139/146.111382

Dimitrijević S, Rajčić-Vujasinović MM, Trifunović D, Trumić B, Stević Z, Dimitrijević S. Microhardness of decorative gold coatings obtained from gold complex based on mercaptotriazole: Comparison with cyanide. in International Journal of Materials Research. 2016;107(7):624-630.
doi:10.3139/146.111382 .

Dimitrijević, Silvana, Rajčić-Vujasinović, Mirjana M., Trifunović, Dejan, Trumić, Biserka, Stević, Zoran, Dimitrijević, Stevan, "Microhardness of decorative gold coatings obtained from gold complex based on mercaptotriazole: Comparison with cyanide" in International Journal of Materials Research, 107, no. 7 (2016):624-630,
https://doi.org/10.3139/146.111382 . .

TY  - CONF
AU  - Mijailović, Daniel
AU  - Stević, Miša
AU  - Stević, Zoran
AU  - Bondarenko, Oleksandr
PY  - 2016
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3166
AB  - The paper gives a brief overview of computer controlled thermogravimetric analysis system. The system consists of a personal computer, software, data acquisition card and interface for the provision of the necessary conditions for the analysis and adaptation of input and output signals. The entire control system, as well as the acquisition, recording and processing of measured data is solved by software. Application is based on programming package LabView.
PB  - 2016 International Conference on Electronics and Information Technology, EIT 2016
C3  - 2016 International Conference on Electronics and Information Technology, EIT 2016 - Conference Proce
T1  - Computer Controlled System for Thermogravimetric Analysis
DO  - 10.1109/ICEAIT.2016.7500982
ER  - 

@conference{
author = "Mijailović, Daniel and Stević, Miša and Stević, Zoran and Bondarenko, Oleksandr",
year = "2016",
abstract = "The paper gives a brief overview of computer controlled thermogravimetric analysis system. The system consists of a personal computer, software, data acquisition card and interface for the provision of the necessary conditions for the analysis and adaptation of input and output signals. The entire control system, as well as the acquisition, recording and processing of measured data is solved by software. Application is based on programming package LabView.",
publisher = "2016 International Conference on Electronics and Information Technology, EIT 2016",
journal = "2016 International Conference on Electronics and Information Technology, EIT 2016 - Conference Proce",
title = "Computer Controlled System for Thermogravimetric Analysis",
doi = "10.1109/ICEAIT.2016.7500982"
}

Mijailović, D., Stević, M., Stević, Z.,& Bondarenko, O.. (2016). Computer Controlled System for Thermogravimetric Analysis. in 2016 International Conference on Electronics and Information Technology, EIT 2016 - Conference Proce
2016 International Conference on Electronics and Information Technology, EIT 2016..
https://doi.org/10.1109/ICEAIT.2016.7500982

Mijailović D, Stević M, Stević Z, Bondarenko O. Computer Controlled System for Thermogravimetric Analysis. in 2016 International Conference on Electronics and Information Technology, EIT 2016 - Conference Proce. 2016;.
doi:10.1109/ICEAIT.2016.7500982 .

Mijailović, Daniel, Stević, Miša, Stević, Zoran, Bondarenko, Oleksandr, "Computer Controlled System for Thermogravimetric Analysis" in 2016 International Conference on Electronics and Information Technology, EIT 2016 - Conference Proce (2016),
https://doi.org/10.1109/ICEAIT.2016.7500982 . .

TY  - CONF
AU  - Stević, Zoran
AU  - Rajčić-Vujasinović, Mirjana M.
AU  - Mijailović, Daniel
AU  - Bondarenko, Oleksandr
PY  - 2016
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3165
AB  - The hardware and software system, based on LabVIEW package, for electrical investigations of supercapacitors was developed. The system provides standard testing (cyclic voltammetry, constant current charge and discharge, electrochemical impedance spectroscopy, etc.) of supercapacitors in the temperature range of 30 to 100 degrees C and under pressure up to 3 bars. The effectiveness of the system was verified.
PB  - 2016 International Conference on Electronics and Information Technology, EIT 2016
C3  - 2016 International Conference on Electronics and Information Technology, EIT 2016 - Conference Proce
T1  - System for Characterization of Supercapacitors
DO  - 10.1109/ICEAIT.2016.7500981
ER  - 

@conference{
author = "Stević, Zoran and Rajčić-Vujasinović, Mirjana M. and Mijailović, Daniel and Bondarenko, Oleksandr",
year = "2016",
abstract = "The hardware and software system, based on LabVIEW package, for electrical investigations of supercapacitors was developed. The system provides standard testing (cyclic voltammetry, constant current charge and discharge, electrochemical impedance spectroscopy, etc.) of supercapacitors in the temperature range of 30 to 100 degrees C and under pressure up to 3 bars. The effectiveness of the system was verified.",
publisher = "2016 International Conference on Electronics and Information Technology, EIT 2016",
journal = "2016 International Conference on Electronics and Information Technology, EIT 2016 - Conference Proce",
title = "System for Characterization of Supercapacitors",
doi = "10.1109/ICEAIT.2016.7500981"
}

Stević, Z., Rajčić-Vujasinović, M. M., Mijailović, D.,& Bondarenko, O.. (2016). System for Characterization of Supercapacitors. in 2016 International Conference on Electronics and Information Technology, EIT 2016 - Conference Proce
2016 International Conference on Electronics and Information Technology, EIT 2016..
https://doi.org/10.1109/ICEAIT.2016.7500981

Stević Z, Rajčić-Vujasinović MM, Mijailović D, Bondarenko O. System for Characterization of Supercapacitors. in 2016 International Conference on Electronics and Information Technology, EIT 2016 - Conference Proce. 2016;.
doi:10.1109/ICEAIT.2016.7500981 .

Stević, Zoran, Rajčić-Vujasinović, Mirjana M., Mijailović, Daniel, Bondarenko, Oleksandr, "System for Characterization of Supercapacitors" in 2016 International Conference on Electronics and Information Technology, EIT 2016 - Conference Proce (2016),
https://doi.org/10.1109/ICEAIT.2016.7500981 . .

TY  - JOUR
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Stević, Zoran
AU  - Volkov-Husović, Tatjana
PY  - 2016
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3280
AB  - Coating materials are widely used in refractory lining to prevent different deleterious effects such are reactions on the mold-metal contact surface, abrasion from liquid metal or alloy, gasses, slags, and other materials in contact with the coating. In this paper, behavior of cordierite based coating exposed to the cavitation erosion was investigated. Cordierite samples sintered at 1200 and 1400 degrees C were used for the tests. Mass loss, level of surface degradation obtained using image analysis and thermal imaging analysis were applied for the cavitation erosion evaluation. Results showed that the cordierite samples can be successfully used in conditions where the cavitation resistance is required.
PB  - Elsevier Sci Ltd, Oxford
T2  - Composites Part B-Engineering
T1  - Non destructive monitoring of cavitation erosion of cordierite based coatings
EP  - 91
SP  - 84
VL  - 97
DO  - 10.1016/j.compositesb.2016.04.073
ER  - 

@article{
author = "Pavlović, Marko and Dojčinović, Marina and Martinović, Sanja and Vlahović, Milica and Stević, Zoran and Volkov-Husović, Tatjana",
year = "2016",
abstract = "Coating materials are widely used in refractory lining to prevent different deleterious effects such are reactions on the mold-metal contact surface, abrasion from liquid metal or alloy, gasses, slags, and other materials in contact with the coating. In this paper, behavior of cordierite based coating exposed to the cavitation erosion was investigated. Cordierite samples sintered at 1200 and 1400 degrees C were used for the tests. Mass loss, level of surface degradation obtained using image analysis and thermal imaging analysis were applied for the cavitation erosion evaluation. Results showed that the cordierite samples can be successfully used in conditions where the cavitation resistance is required.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Composites Part B-Engineering",
title = "Non destructive monitoring of cavitation erosion of cordierite based coatings",
pages = "91-84",
volume = "97",
doi = "10.1016/j.compositesb.2016.04.073"
}

Pavlović, M., Dojčinović, M., Martinović, S., Vlahović, M., Stević, Z.,& Volkov-Husović, T.. (2016). Non destructive monitoring of cavitation erosion of cordierite based coatings. in Composites Part B-Engineering
Elsevier Sci Ltd, Oxford., 97, 84-91.
https://doi.org/10.1016/j.compositesb.2016.04.073

Pavlović M, Dojčinović M, Martinović S, Vlahović M, Stević Z, Volkov-Husović T. Non destructive monitoring of cavitation erosion of cordierite based coatings. in Composites Part B-Engineering. 2016;97:84-91.
doi:10.1016/j.compositesb.2016.04.073 .

Pavlović, Marko, Dojčinović, Marina, Martinović, Sanja, Vlahović, Milica, Stević, Zoran, Volkov-Husović, Tatjana, "Non destructive monitoring of cavitation erosion of cordierite based coatings" in Composites Part B-Engineering, 97 (2016):84-91,
https://doi.org/10.1016/j.compositesb.2016.04.073 . .

TY  - JOUR
AU  - Dimitrijević, Silvana
AU  - Stević, Zoran
AU  - Rajčić-Vujasinović, Mirjana M.
AU  - Grekulović, Vesna
AU  - Dimitrijević, Stevan
AU  - Trumić, Biserka
AU  - Alagić, Slađana
PY  - 2015
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/2915
AB  - The goal of this paper was to study the influence of organic gold complex based on mercaptotriazole on photoresist layers used in manufacturing of printed circuit boards (PCBs). Investigations were performed by immersion the previously prepared boards in electrolytes with different pH values (pH=2, 4, 7, 9 and 12) at gold concentration of 2.5 g/dm3 and in gold complexes with different gold concentrations (1.5; 2.0; 2.5; 3.0 and 3.5 g/dm(3)) at pH value of pH=9. Investigations showed that photoresist layers on boards are the most resistant at optimal operating conditions, pH=9 and concentration of gold of 2.5 g/dm(3).
PB  - Savez inženjera metalurgije Srbije, Beograd
T2  - Metallurgical & Materials Engineering
T1  - The influence of novel organic gold complex on photoresist layers of printed circuit boards
EP  - 275
IS  - 4
SP  - 269
VL  - 21
DO  - 10.30544/73
ER  - 

@article{
author = "Dimitrijević, Silvana and Stević, Zoran and Rajčić-Vujasinović, Mirjana M. and Grekulović, Vesna and Dimitrijević, Stevan and Trumić, Biserka and Alagić, Slađana",
year = "2015",
abstract = "The goal of this paper was to study the influence of organic gold complex based on mercaptotriazole on photoresist layers used in manufacturing of printed circuit boards (PCBs). Investigations were performed by immersion the previously prepared boards in electrolytes with different pH values (pH=2, 4, 7, 9 and 12) at gold concentration of 2.5 g/dm3 and in gold complexes with different gold concentrations (1.5; 2.0; 2.5; 3.0 and 3.5 g/dm(3)) at pH value of pH=9. Investigations showed that photoresist layers on boards are the most resistant at optimal operating conditions, pH=9 and concentration of gold of 2.5 g/dm(3).",
publisher = "Savez inženjera metalurgije Srbije, Beograd",
journal = "Metallurgical & Materials Engineering",
title = "The influence of novel organic gold complex on photoresist layers of printed circuit boards",
pages = "275-269",
number = "4",
volume = "21",
doi = "10.30544/73"
}

Dimitrijević, S., Stević, Z., Rajčić-Vujasinović, M. M., Grekulović, V., Dimitrijević, S., Trumić, B.,& Alagić, S.. (2015). The influence of novel organic gold complex on photoresist layers of printed circuit boards. in Metallurgical & Materials Engineering
Savez inženjera metalurgije Srbije, Beograd., 21(4), 269-275.
https://doi.org/10.30544/73

Dimitrijević S, Stević Z, Rajčić-Vujasinović MM, Grekulović V, Dimitrijević S, Trumić B, Alagić S. The influence of novel organic gold complex on photoresist layers of printed circuit boards. in Metallurgical & Materials Engineering. 2015;21(4):269-275.
doi:10.30544/73 .

Dimitrijević, Silvana, Stević, Zoran, Rajčić-Vujasinović, Mirjana M., Grekulović, Vesna, Dimitrijević, Stevan, Trumić, Biserka, Alagić, Slađana, "The influence of novel organic gold complex on photoresist layers of printed circuit boards" in Metallurgical & Materials Engineering, 21, no. 4 (2015):269-275,
https://doi.org/10.30544/73 . .

TY  - JOUR
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Stević, Zoran
AU  - Volkov-Husović, Tatjana
PY  - 2015
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/3109
AB  - Low level laser (LLL) was applied to induct destruction of the low cement high alumina refractory concrete (LCC) samples. Three different series of samples were used in the experiment: a reference one dried at 105 degrees C, sintered at 1300 degrees C and sintered at 1600 degrees C. Level of destruction during time interval from 5 to 25 min was monitored by measuring surface and depth of damage. Obtained results shown that minimal level of destruction was observed for the samples sinteted at 1600 degrees C for the whole time interval.
PB  - Elsevier Sci Ltd, Oxford
T2  - Engineering Structures
T1  - Influence of sintering temperature on low level laser (LLL) destruction of low cement high alumina refractory concrete
EP  - 467
SP  - 462
VL  - 99
DO  - 10.1016/j.engstruct.2015.05.020
ER  - 

@article{
author = "Martinović, Sanja and Vlahović, Milica and Stević, Zoran and Volkov-Husović, Tatjana",
year = "2015",
abstract = "Low level laser (LLL) was applied to induct destruction of the low cement high alumina refractory concrete (LCC) samples. Three different series of samples were used in the experiment: a reference one dried at 105 degrees C, sintered at 1300 degrees C and sintered at 1600 degrees C. Level of destruction during time interval from 5 to 25 min was monitored by measuring surface and depth of damage. Obtained results shown that minimal level of destruction was observed for the samples sinteted at 1600 degrees C for the whole time interval.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Engineering Structures",
title = "Influence of sintering temperature on low level laser (LLL) destruction of low cement high alumina refractory concrete",
pages = "467-462",
volume = "99",
doi = "10.1016/j.engstruct.2015.05.020"
}

Martinović, S., Vlahović, M., Stević, Z.,& Volkov-Husović, T.. (2015). Influence of sintering temperature on low level laser (LLL) destruction of low cement high alumina refractory concrete. in Engineering Structures
Elsevier Sci Ltd, Oxford., 99, 462-467.
https://doi.org/10.1016/j.engstruct.2015.05.020

Martinović S, Vlahović M, Stević Z, Volkov-Husović T. Influence of sintering temperature on low level laser (LLL) destruction of low cement high alumina refractory concrete. in Engineering Structures. 2015;99:462-467.
doi:10.1016/j.engstruct.2015.05.020 .

Martinović, Sanja, Vlahović, Milica, Stević, Zoran, Volkov-Husović, Tatjana, "Influence of sintering temperature on low level laser (LLL) destruction of low cement high alumina refractory concrete" in Engineering Structures, 99 (2015):462-467,
https://doi.org/10.1016/j.engstruct.2015.05.020 . .