TY  - CONF
AU  - Knežević-Jugović, Zorica
AU  - Jugović, Branimir
AU  - Jakovetić, Sonja
AU  - Bezbradica, Dejan
AU  - Antov, Mirjana
AU  - Saied, Omar Ali
AU  - Gvozdenović, Milica
PY  - 2011
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1768
AB  - The present study compares the results of two different methods employed for preparation of polyaniline based glucose biosensor with respect to enzyme loading, biosensing efficiency and potential stability. Kinetic analysis of the potentiometric data for two enzyme immobilized electrode systems show that the GOx/PANI electrode is suitable for assaying samples with low analyte concentrations, whereas the GOx/m-ABA/PANI electrode system exhibits a better potential stability. It may therefore be possible to achieve high level of biosensing efficiency by chemical modeling and synthesis combined with careful selection of the immobilization method.
PB  - Tatranské Matliare : Slovak Society of Chemical Engineering
C3  - Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering
T1  - Design of a polyaniline based biosensor electrode for glucose: A comparative study of two immobilized systems
EP  - 1525
SP  - 1519
UR  - https://hdl.handle.net/21.15107/rcub_technorep_1768
ER  - 

@conference{
author = "Knežević-Jugović, Zorica and Jugović, Branimir and Jakovetić, Sonja and Bezbradica, Dejan and Antov, Mirjana and Saied, Omar Ali and Gvozdenović, Milica",
year = "2011",
abstract = "The present study compares the results of two different methods employed for preparation of polyaniline based glucose biosensor with respect to enzyme loading, biosensing efficiency and potential stability. Kinetic analysis of the potentiometric data for two enzyme immobilized electrode systems show that the GOx/PANI electrode is suitable for assaying samples with low analyte concentrations, whereas the GOx/m-ABA/PANI electrode system exhibits a better potential stability. It may therefore be possible to achieve high level of biosensing efficiency by chemical modeling and synthesis combined with careful selection of the immobilization method.",
publisher = "Tatranské Matliare : Slovak Society of Chemical Engineering",
journal = "Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering",
title = "Design of a polyaniline based biosensor electrode for glucose: A comparative study of two immobilized systems",
pages = "1525-1519",
url = "https://hdl.handle.net/21.15107/rcub_technorep_1768"
}

Knežević-Jugović, Z., Jugović, B., Jakovetić, S., Bezbradica, D., Antov, M., Saied, O. A.,& Gvozdenović, M.. (2011). Design of a polyaniline based biosensor electrode for glucose: A comparative study of two immobilized systems. in Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering
Tatranské Matliare : Slovak Society of Chemical Engineering., 1519-1525.
https://hdl.handle.net/21.15107/rcub_technorep_1768

Knežević-Jugović Z, Jugović B, Jakovetić S, Bezbradica D, Antov M, Saied OA, Gvozdenović M. Design of a polyaniline based biosensor electrode for glucose: A comparative study of two immobilized systems. in Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering. 2011;:1519-1525.
https://hdl.handle.net/21.15107/rcub_technorep_1768 .

Knežević-Jugović, Zorica, Jugović, Branimir, Jakovetić, Sonja, Bezbradica, Dejan, Antov, Mirjana, Saied, Omar Ali, Gvozdenović, Milica, "Design of a polyaniline based biosensor electrode for glucose: A comparative study of two immobilized systems" in Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering (2011):1519-1525,
https://hdl.handle.net/21.15107/rcub_technorep_1768 .

TY  - JOUR
AU  - Gvozdenović, Milica
AU  - Jugović, Branimir
AU  - Bezbradica, Dejan
AU  - Antov, Mirjana
AU  - Knežević-Jugović, Zorica
AU  - Grgur, Branimir
PY  - 2011
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1826
AB  - Polyaniline (PANI) enzyme electrode was formed by immobilisation of Glucose oxidase (GOx) via glutaraldehyde into electrochemically polymerised PANI on graphite electrode. Electrochemical polymerisation of PANI on graphite was performed from aqueous solution of 1.0 mol dm(-3) HCl and 0.25 mol dm(-3) aniline at constant current density of 2.0 mA cm(-2). Hronopotentiometric curves of the PANI enzyme electrode obtained at current density of 10 mu A cm(-2) were recorded in different glucose concentrations. The linearity response range was between 1.0 and 5.0 mmol dm(-3) of glucose concentration. The estimated apparent Michaelis-Menten constant, was K-m(') = 0.30 mmol dm(-3), which is significantly lower than that of free enzyme.
PB  - Elsevier Sci Ltd, Oxford
T2  - Food Chemistry
T1  - Electrochemical determination of glucose using polyaniline electrode modified by glucose oxidase
EP  - 400
IS  - 1
SP  - 396
VL  - 124
DO  - 10.1016/j.foodchem.2010.06.046
ER  - 

@article{
author = "Gvozdenović, Milica and Jugović, Branimir and Bezbradica, Dejan and Antov, Mirjana and Knežević-Jugović, Zorica and Grgur, Branimir",
year = "2011",
abstract = "Polyaniline (PANI) enzyme electrode was formed by immobilisation of Glucose oxidase (GOx) via glutaraldehyde into electrochemically polymerised PANI on graphite electrode. Electrochemical polymerisation of PANI on graphite was performed from aqueous solution of 1.0 mol dm(-3) HCl and 0.25 mol dm(-3) aniline at constant current density of 2.0 mA cm(-2). Hronopotentiometric curves of the PANI enzyme electrode obtained at current density of 10 mu A cm(-2) were recorded in different glucose concentrations. The linearity response range was between 1.0 and 5.0 mmol dm(-3) of glucose concentration. The estimated apparent Michaelis-Menten constant, was K-m(') = 0.30 mmol dm(-3), which is significantly lower than that of free enzyme.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Food Chemistry",
title = "Electrochemical determination of glucose using polyaniline electrode modified by glucose oxidase",
pages = "400-396",
number = "1",
volume = "124",
doi = "10.1016/j.foodchem.2010.06.046"
}

Gvozdenović, M., Jugović, B., Bezbradica, D., Antov, M., Knežević-Jugović, Z.,& Grgur, B.. (2011). Electrochemical determination of glucose using polyaniline electrode modified by glucose oxidase. in Food Chemistry
Elsevier Sci Ltd, Oxford., 124(1), 396-400.
https://doi.org/10.1016/j.foodchem.2010.06.046

Gvozdenović M, Jugović B, Bezbradica D, Antov M, Knežević-Jugović Z, Grgur B. Electrochemical determination of glucose using polyaniline electrode modified by glucose oxidase. in Food Chemistry. 2011;124(1):396-400.
doi:10.1016/j.foodchem.2010.06.046 .

Gvozdenović, Milica, Jugović, Branimir, Bezbradica, Dejan, Antov, Mirjana, Knežević-Jugović, Zorica, Grgur, Branimir, "Electrochemical determination of glucose using polyaniline electrode modified by glucose oxidase" in Food Chemistry, 124, no. 1 (2011):396-400,
https://doi.org/10.1016/j.foodchem.2010.06.046 . .

TY  - JOUR
AU  - Popov, Konstantin I
AU  - Nikolic, Nebojša D
AU  - Živković, Predrag M.
AU  - Branković, Goran
PY  - 2010
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5618
AB  - In this study, it is considered: (a) the effect of the exchange current density to the limiting diffusion current density ratio (J(0)/J(L)) at low level of surface coarseness on the polarization characteristics of the electrochemical process, (b) the effect of the shape of surface protrusions oil the electrode surface roughness, and (c) the effect of surface roughness oil the J(0)/J(L) ratio. It was shown that the increase of the value of the j(0)/J(L) ratio produces a decrease of overpotential at fixed value of current density. At selected set of conditions, the j(0)/j(L) ratio cats be increased by the increase of roughness of electrode surface by electrodeposition of disperse deposits at low level of coarseness The increase of the value of the J(0)/J(L) ratio produces large saving of energy required for the evaluation of electrochemical reaction The conditions in which the electrochemical process cats become Ohmic controlled were also specified.
PB  - Pergamon-Elsevier Science Ltd, Oxford
T2  - Electrochimica Acta
T1  - The effect of the electrode surface roughness at low level of coarseness on the polarization characteristics of electrochemical processes
EP  - 1925
IS  - 6
SP  - 1919
VL  - 55
DO  - 10.1016/j.electacta.2009.10.085
ER  - 

@article{
author = "Popov, Konstantin I and Nikolic, Nebojša D and Živković, Predrag M. and Branković, Goran",
year = "2010",
abstract = "In this study, it is considered: (a) the effect of the exchange current density to the limiting diffusion current density ratio (J(0)/J(L)) at low level of surface coarseness on the polarization characteristics of the electrochemical process, (b) the effect of the shape of surface protrusions oil the electrode surface roughness, and (c) the effect of surface roughness oil the J(0)/J(L) ratio. It was shown that the increase of the value of the j(0)/J(L) ratio produces a decrease of overpotential at fixed value of current density. At selected set of conditions, the j(0)/j(L) ratio cats be increased by the increase of roughness of electrode surface by electrodeposition of disperse deposits at low level of coarseness The increase of the value of the J(0)/J(L) ratio produces large saving of energy required for the evaluation of electrochemical reaction The conditions in which the electrochemical process cats become Ohmic controlled were also specified.",
publisher = "Pergamon-Elsevier Science Ltd, Oxford",
journal = "Electrochimica Acta",
title = "The effect of the electrode surface roughness at low level of coarseness on the polarization characteristics of electrochemical processes",
pages = "1925-1919",
number = "6",
volume = "55",
doi = "10.1016/j.electacta.2009.10.085"
}

Popov, K. I., Nikolic, N. D., Živković, P. M.,& Branković, G.. (2010). The effect of the electrode surface roughness at low level of coarseness on the polarization characteristics of electrochemical processes. in Electrochimica Acta
Pergamon-Elsevier Science Ltd, Oxford., 55(6), 1919-1925.
https://doi.org/10.1016/j.electacta.2009.10.085

Popov KI, Nikolic ND, Živković PM, Branković G. The effect of the electrode surface roughness at low level of coarseness on the polarization characteristics of electrochemical processes. in Electrochimica Acta. 2010;55(6):1919-1925.
doi:10.1016/j.electacta.2009.10.085 .

Popov, Konstantin I, Nikolic, Nebojša D, Živković, Predrag M., Branković, Goran, "The effect of the electrode surface roughness at low level of coarseness on the polarization characteristics of electrochemical processes" in Electrochimica Acta, 55, no. 6 (2010):1919-1925,
https://doi.org/10.1016/j.electacta.2009.10.085 . .

TY  - JOUR
AU  - Marinović, Vedrana M.
AU  - Marinović, Sanja
AU  - Jovanović, M.
AU  - Jovanovic, J.
AU  - Štrbac, Svetlana
PY  - 2010
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5619
AB  - The electrochemical reduction of 2,4,6-trinitrotoluene (TNT) was investigated by cyclic voltammetry on a platinum electrode in aqueous sodium chloride solutions with acetonitrile containing different concentrations of TNT. The obtained cyclic voltammograms showed three distinct reduction peaks in the potential range of -0.45 to -0.8 V (vs. an Ag/AgCl (3M KCl) reference electrode), which refer to the multi-step process of TNT reduction. The calibration curves of the dependence of the first peak current on the TNT concentration were linear in the ranges 4.4-638.4 mu M and 0.11-4.40 mu M for two different scan rates, 200 my s(-1) and 20 mV s(-1), respectively. The detection limit was 0.11 mu M. Acetonitrile chemisorption on Pt surface took place and caused thus modified platinum electrode to exhibit an electrochemically stabile behaviour. Hence, a very high reproducibility over a prolonged time and voltammetric cycling was provided for using a Pt wire that is easy to handle as a suitable material for TNT sensing. Additionally, it was confirmed by testing the acetonitrile modified Pt wire for TNT detection in river water.
PB  - Elsevier
T2  - Journal of Electroanalytical Chemistry
T1  - The electrochemical reduction of trinitrotoluene on a platinum wire modified by chemisorbed acetonitrile
EP  - 7
IS  - 1
SP  - 1
VL  - 648
DO  - 10.1016/j.jelechem.2010.07.008
ER  - 

@article{
author = "Marinović, Vedrana M. and Marinović, Sanja and Jovanović, M. and Jovanovic, J. and Štrbac, Svetlana",
year = "2010",
abstract = "The electrochemical reduction of 2,4,6-trinitrotoluene (TNT) was investigated by cyclic voltammetry on a platinum electrode in aqueous sodium chloride solutions with acetonitrile containing different concentrations of TNT. The obtained cyclic voltammograms showed three distinct reduction peaks in the potential range of -0.45 to -0.8 V (vs. an Ag/AgCl (3M KCl) reference electrode), which refer to the multi-step process of TNT reduction. The calibration curves of the dependence of the first peak current on the TNT concentration were linear in the ranges 4.4-638.4 mu M and 0.11-4.40 mu M for two different scan rates, 200 my s(-1) and 20 mV s(-1), respectively. The detection limit was 0.11 mu M. Acetonitrile chemisorption on Pt surface took place and caused thus modified platinum electrode to exhibit an electrochemically stabile behaviour. Hence, a very high reproducibility over a prolonged time and voltammetric cycling was provided for using a Pt wire that is easy to handle as a suitable material for TNT sensing. Additionally, it was confirmed by testing the acetonitrile modified Pt wire for TNT detection in river water.",
publisher = "Elsevier",
journal = "Journal of Electroanalytical Chemistry",
title = "The electrochemical reduction of trinitrotoluene on a platinum wire modified by chemisorbed acetonitrile",
pages = "7-1",
number = "1",
volume = "648",
doi = "10.1016/j.jelechem.2010.07.008"
}

Marinović, V. M., Marinović, S., Jovanović, M., Jovanovic, J.,& Štrbac, S.. (2010). The electrochemical reduction of trinitrotoluene on a platinum wire modified by chemisorbed acetonitrile. in Journal of Electroanalytical Chemistry
Elsevier., 648(1), 1-7.
https://doi.org/10.1016/j.jelechem.2010.07.008

Marinović VM, Marinović S, Jovanović M, Jovanovic J, Štrbac S. The electrochemical reduction of trinitrotoluene on a platinum wire modified by chemisorbed acetonitrile. in Journal of Electroanalytical Chemistry. 2010;648(1):1-7.
doi:10.1016/j.jelechem.2010.07.008 .

Marinović, Vedrana M., Marinović, Sanja, Jovanović, M., Jovanovic, J., Štrbac, Svetlana, "The electrochemical reduction of trinitrotoluene on a platinum wire modified by chemisorbed acetonitrile" in Journal of Electroanalytical Chemistry, 648, no. 1 (2010):1-7,
https://doi.org/10.1016/j.jelechem.2010.07.008 . .

TY  - CONF
AU  - Jugović, Branimir
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina
AU  - Gvozdenović, Milica
AU  - Grgur, Branimir
PY  - 2010
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1562
AB  - Electrochemical behavior of zinc and polyaniline (PANI) electrode polymerized from 0.1 M HCl and 0.1 M aniline on graphite electrode, in 0.2 M ZnCl2 and 0.50 M NH4Cl (chloride electrolyte) and with addition of 0.33 M Na-citrate (chloride/citrate electrolyte) were investigated. In the chloride/citrate comparing with chloride containing electrolyte for the zinc electrode negative shift of the open circuit potential of 150 mV, decreases of exchange current density for more than order of magnitude and increase of cathodic Tafel slope, due to the zinc ions complexation, were observed. In citrate/chloride electrolyte zinc dendrite formation were completely suppressed. PANI electrodes show better discharge characteristic in chloride/citrate electrolyte with determined maximum discharge capacity of 164 mAh g-1.
PB  - Tatranské Matliare : Slovak Society of Chemical Engineering
C3  - Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering
T1  - Improved electrolyte for zinc-polyaniline batteries
EP  - 870
SP  - 866
UR  - https://hdl.handle.net/21.15107/rcub_technorep_1562
ER  - 

@conference{
author = "Jugović, Branimir and Trišović, Tomislav and Stevanović, Jasmina and Gvozdenović, Milica and Grgur, Branimir",
year = "2010",
abstract = "Electrochemical behavior of zinc and polyaniline (PANI) electrode polymerized from 0.1 M HCl and 0.1 M aniline on graphite electrode, in 0.2 M ZnCl2 and 0.50 M NH4Cl (chloride electrolyte) and with addition of 0.33 M Na-citrate (chloride/citrate electrolyte) were investigated. In the chloride/citrate comparing with chloride containing electrolyte for the zinc electrode negative shift of the open circuit potential of 150 mV, decreases of exchange current density for more than order of magnitude and increase of cathodic Tafel slope, due to the zinc ions complexation, were observed. In citrate/chloride electrolyte zinc dendrite formation were completely suppressed. PANI electrodes show better discharge characteristic in chloride/citrate electrolyte with determined maximum discharge capacity of 164 mAh g-1.",
publisher = "Tatranské Matliare : Slovak Society of Chemical Engineering",
journal = "Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering",
title = "Improved electrolyte for zinc-polyaniline batteries",
pages = "870-866",
url = "https://hdl.handle.net/21.15107/rcub_technorep_1562"
}

Jugović, B., Trišović, T., Stevanović, J., Gvozdenović, M.,& Grgur, B.. (2010). Improved electrolyte for zinc-polyaniline batteries. in Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering
Tatranské Matliare : Slovak Society of Chemical Engineering., 866-870.
https://hdl.handle.net/21.15107/rcub_technorep_1562

Jugović B, Trišović T, Stevanović J, Gvozdenović M, Grgur B. Improved electrolyte for zinc-polyaniline batteries. in Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering. 2010;:866-870.
https://hdl.handle.net/21.15107/rcub_technorep_1562 .

Jugović, Branimir, Trišović, Tomislav, Stevanović, Jasmina, Gvozdenović, Milica, Grgur, Branimir, "Improved electrolyte for zinc-polyaniline batteries" in Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering (2010):866-870,
https://hdl.handle.net/21.15107/rcub_technorep_1562 .

TY  - CONF
AU  - Gvozdenović, Milica
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina
AU  - Jugović, Branimir
AU  - Grgur, Branimir
PY  - 2010
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1544
AB  - Polyaniline (PANI) anode, electrochemically synthesized on graphite electrode from sulfuric acid solution, and electrochemically formed thin film lead dioxide cathode, were investigated for possible applications as electrode materials in PANI | H2SO4 | PbO2 aqueous based rechargeable power sources. The stimulation of charge/discharge characteristics of the cell, based on half cell reactions investigations, was evaluated. Charging of the cell would occur in the voltage range of 1.2 and 1.7 V, while discharge would occur in the range of 1.3 and 1 V.
PB  - Tatranské Matliare : Slovak Society of Chemical Engineering
C3  - Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering
T1  - Characteristics of polyaniline lead - dioxide power sources
EP  - 875
SP  - 871
UR  - https://hdl.handle.net/21.15107/rcub_technorep_1544
ER  - 

@conference{
author = "Gvozdenović, Milica and Trišović, Tomislav and Stevanović, Jasmina and Jugović, Branimir and Grgur, Branimir",
year = "2010",
abstract = "Polyaniline (PANI) anode, electrochemically synthesized on graphite electrode from sulfuric acid solution, and electrochemically formed thin film lead dioxide cathode, were investigated for possible applications as electrode materials in PANI | H2SO4 | PbO2 aqueous based rechargeable power sources. The stimulation of charge/discharge characteristics of the cell, based on half cell reactions investigations, was evaluated. Charging of the cell would occur in the voltage range of 1.2 and 1.7 V, while discharge would occur in the range of 1.3 and 1 V.",
publisher = "Tatranské Matliare : Slovak Society of Chemical Engineering",
journal = "Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering",
title = "Characteristics of polyaniline lead - dioxide power sources",
pages = "875-871",
url = "https://hdl.handle.net/21.15107/rcub_technorep_1544"
}

Gvozdenović, M., Trišović, T., Stevanović, J., Jugović, B.,& Grgur, B.. (2010). Characteristics of polyaniline lead - dioxide power sources. in Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering
Tatranské Matliare : Slovak Society of Chemical Engineering., 871-875.
https://hdl.handle.net/21.15107/rcub_technorep_1544

Gvozdenović M, Trišović T, Stevanović J, Jugović B, Grgur B. Characteristics of polyaniline lead - dioxide power sources. in Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering. 2010;:871-875.
https://hdl.handle.net/21.15107/rcub_technorep_1544 .

Gvozdenović, Milica, Trišović, Tomislav, Stevanović, Jasmina, Jugović, Branimir, Grgur, Branimir, "Characteristics of polyaniline lead - dioxide power sources" in Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering (2010):871-875,
https://hdl.handle.net/21.15107/rcub_technorep_1544 .

TY  - CONF
AU  - Gvozdenović, Milica
AU  - Jugović, Branimir
AU  - Grgur, Branimir
PY  - 2010
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1573
AB  - Electrochemical polymerization of Polyaniline (PANI) film on aluminum electrode from aqueous solution of 0.20 mol dm-3 sodium benzoate containing 0.25 mol dm-3 aniline have been investigated using potentiodinamic and galvanostatic techniques. Corrosion behavior of aluminum and PANI coated aluminum electrode during initial exposure to 3% NaCl have been investigated using electrochemical potentiodimanic and impedance spectroscopy technique (EIS). It was observed that thin PANI coating of estimated thickness of 10μm had provided good initial corrosion protection of aluminum in3% NaCl, decreasing the corrosion current density at least 15 times.
PB  - Nice : International Society of Electrochemistry
C3  - The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biol
T1  - Electrochemical synthesis and corrosion properties of polyaniline coating on aluminum
SP  - 06-P-034
UR  - https://hdl.handle.net/21.15107/rcub_technorep_1573
ER  - 

@conference{
author = "Gvozdenović, Milica and Jugović, Branimir and Grgur, Branimir",
year = "2010",
abstract = "Electrochemical polymerization of Polyaniline (PANI) film on aluminum electrode from aqueous solution of 0.20 mol dm-3 sodium benzoate containing 0.25 mol dm-3 aniline have been investigated using potentiodinamic and galvanostatic techniques. Corrosion behavior of aluminum and PANI coated aluminum electrode during initial exposure to 3% NaCl have been investigated using electrochemical potentiodimanic and impedance spectroscopy technique (EIS). It was observed that thin PANI coating of estimated thickness of 10μm had provided good initial corrosion protection of aluminum in3% NaCl, decreasing the corrosion current density at least 15 times.",
publisher = "Nice : International Society of Electrochemistry",
journal = "The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biol",
title = "Electrochemical synthesis and corrosion properties of polyaniline coating on aluminum",
pages = "06-P-034",
url = "https://hdl.handle.net/21.15107/rcub_technorep_1573"
}

Gvozdenović, M., Jugović, B.,& Grgur, B.. (2010). Electrochemical synthesis and corrosion properties of polyaniline coating on aluminum. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biol
Nice : International Society of Electrochemistry., 06-P-034.
https://hdl.handle.net/21.15107/rcub_technorep_1573

Gvozdenović M, Jugović B, Grgur B. Electrochemical synthesis and corrosion properties of polyaniline coating on aluminum. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biol. 2010;:06-P-034.
https://hdl.handle.net/21.15107/rcub_technorep_1573 .

Gvozdenović, Milica, Jugović, Branimir, Grgur, Branimir, "Electrochemical synthesis and corrosion properties of polyaniline coating on aluminum" in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biol (2010):06-P-034,
https://hdl.handle.net/21.15107/rcub_technorep_1573 .

TY  - CONF
AU  - Gvozdenović, Milica
AU  - Jugović, Branimir
AU  - Bezbradica, Dejan
AU  - Antov, Mirjana
AU  - Knežević-Jugović, Zorica
AU  - Grgur, Branimir
PY  - 2010
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1575
AB  - Polyaniline (PANI) enzyme electrode was formed by immobilization of Glucose oxidase (GOx) via glutaraldehyde into electrochemicaly polymerized PANI on graphite electrode. Electrochemical polymerization of PANI on graphite was performed from aqueous solution of 1.0 mol dm-3 HCl and 0.25 mol dm-3 aniline at constant current density of 2.0 mA cm-2. Hronopotentiometric curves of the PANI enzyme electrode obtained at current density of 10 μA cm-2 were recorded in different glucose concentrations. The linearity response range was between 1.0-5.0 mmol dm-3 of glucose concentration. The estimated apparent Michaelis-Menten constant, was Km ′ = 0.30 mmol dm-3, which is scientifically lower than that of free enzyme.
PB  - Nice : International Society of Electrochemistry
C3  - The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biol
T1  - Electrochemical determination of glucose using polyaniline electrode modified by glucose oxidize
VL  - s11-P-041
UR  - https://hdl.handle.net/21.15107/rcub_technorep_1575
ER  - 

@conference{
author = "Gvozdenović, Milica and Jugović, Branimir and Bezbradica, Dejan and Antov, Mirjana and Knežević-Jugović, Zorica and Grgur, Branimir",
year = "2010",
abstract = "Polyaniline (PANI) enzyme electrode was formed by immobilization of Glucose oxidase (GOx) via glutaraldehyde into electrochemicaly polymerized PANI on graphite electrode. Electrochemical polymerization of PANI on graphite was performed from aqueous solution of 1.0 mol dm-3 HCl and 0.25 mol dm-3 aniline at constant current density of 2.0 mA cm-2. Hronopotentiometric curves of the PANI enzyme electrode obtained at current density of 10 μA cm-2 were recorded in different glucose concentrations. The linearity response range was between 1.0-5.0 mmol dm-3 of glucose concentration. The estimated apparent Michaelis-Menten constant, was Km ′ = 0.30 mmol dm-3, which is scientifically lower than that of free enzyme.",
publisher = "Nice : International Society of Electrochemistry",
journal = "The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biol",
title = "Electrochemical determination of glucose using polyaniline electrode modified by glucose oxidize",
volume = "s11-P-041",
url = "https://hdl.handle.net/21.15107/rcub_technorep_1575"
}

Gvozdenović, M., Jugović, B., Bezbradica, D., Antov, M., Knežević-Jugović, Z.,& Grgur, B.. (2010). Electrochemical determination of glucose using polyaniline electrode modified by glucose oxidize. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biol
Nice : International Society of Electrochemistry., s11-P-041.
https://hdl.handle.net/21.15107/rcub_technorep_1575

Gvozdenović M, Jugović B, Bezbradica D, Antov M, Knežević-Jugović Z, Grgur B. Electrochemical determination of glucose using polyaniline electrode modified by glucose oxidize. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biol. 2010;s11-P-041.
https://hdl.handle.net/21.15107/rcub_technorep_1575 .

Gvozdenović, Milica, Jugović, Branimir, Bezbradica, Dejan, Antov, Mirjana, Knežević-Jugović, Zorica, Grgur, Branimir, "Electrochemical determination of glucose using polyaniline electrode modified by glucose oxidize" in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biol, s11-P-041 (2010),
https://hdl.handle.net/21.15107/rcub_technorep_1575 .

TY  - CONF
AU  - Gvozdenović, Milica
AU  - Jugović, Branimir
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina
AU  - Grgur, Branimir
PY  - 2010
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1541
AB  - Polyaniline (PANI) electrode was formed by electrochemical synthesis on graphite under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 mol dm-3 HCl and 0.25 mol dm-3 aniline. Electrochemical characterization of the PANI electrode was performed in 0.5 mol dm-3 HCl using cyclic voltammetry and galvanostatic measurements. The overall charge capacity of the PANI electrode was estimated to be 0.154 mA h cm-2, corresponding to 25 % of the theoretical mass of PANI available for the dopant exchange. It was observed that during initial cyclization at low pH, the extent of PANI degradation products was insignificant and practically had no influence on the charge/discharge characteristics of the PANI electrode.
PB  - Nice : International Society of Electrochemistry
C3  - The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biol
T1  - Electrochemical characterization of polyaniline electrode for use in electrochemical power sources
SP  - s05-P-049
UR  - https://hdl.handle.net/21.15107/rcub_technorep_1541
ER  - 

@conference{
author = "Gvozdenović, Milica and Jugović, Branimir and Trišović, Tomislav and Stevanović, Jasmina and Grgur, Branimir",
year = "2010",
abstract = "Polyaniline (PANI) electrode was formed by electrochemical synthesis on graphite under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 mol dm-3 HCl and 0.25 mol dm-3 aniline. Electrochemical characterization of the PANI electrode was performed in 0.5 mol dm-3 HCl using cyclic voltammetry and galvanostatic measurements. The overall charge capacity of the PANI electrode was estimated to be 0.154 mA h cm-2, corresponding to 25 % of the theoretical mass of PANI available for the dopant exchange. It was observed that during initial cyclization at low pH, the extent of PANI degradation products was insignificant and practically had no influence on the charge/discharge characteristics of the PANI electrode.",
publisher = "Nice : International Society of Electrochemistry",
journal = "The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biol",
title = "Electrochemical characterization of polyaniline electrode for use in electrochemical power sources",
pages = "s05-P-049",
url = "https://hdl.handle.net/21.15107/rcub_technorep_1541"
}

Gvozdenović, M., Jugović, B., Trišović, T., Stevanović, J.,& Grgur, B.. (2010). Electrochemical characterization of polyaniline electrode for use in electrochemical power sources. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biol
Nice : International Society of Electrochemistry., s05-P-049.
https://hdl.handle.net/21.15107/rcub_technorep_1541

Gvozdenović M, Jugović B, Trišović T, Stevanović J, Grgur B. Electrochemical characterization of polyaniline electrode for use in electrochemical power sources. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biol. 2010;:s05-P-049.
https://hdl.handle.net/21.15107/rcub_technorep_1541 .

Gvozdenović, Milica, Jugović, Branimir, Trišović, Tomislav, Stevanović, Jasmina, Grgur, Branimir, "Electrochemical characterization of polyaniline electrode for use in electrochemical power sources" in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biol (2010):s05-P-049,
https://hdl.handle.net/21.15107/rcub_technorep_1541 .

TY  - CONF
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica
AU  - Stevanović, Jasmina
AU  - Trišović, Tomislav
AU  - Grgur, Branimir
PY  - 2010
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1570
AB  - Polyaniline electrode, was obtained by electrochemical polymerization at constant current density of 2.0 mA cm-2 from aqueous solution of 1.0 mol dm-3 HCl containing 0.25 mol dm-3 aniline. Electrochemical characterization of the polyaniline electrode in chloride and chloride/citrate electrolyte, for different anodic potential limits, was performed using cyclic voltammetry and galvanostatic measurements. It was observed that for anodic potential 0.32 V, higher electrode capacity in chloride/citrate was obtained. For anodic potential limit of 0.50 V, faster decrease of the electrode capacity in chloride/citrate electrolyte was also observed. It was suggested that influence of both chloride and citrate anions has to be taken into account.
PB  - Nice : International Society of Electrochemistry
C3  - The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biol
T1  - Electrochemical characterization of electrochemically polymerized polyaniline in citrate containing electrolyte
SP  - s05-P-054
UR  - https://hdl.handle.net/21.15107/rcub_technorep_1570
ER  - 

@conference{
author = "Jugović, Branimir and Gvozdenović, Milica and Stevanović, Jasmina and Trišović, Tomislav and Grgur, Branimir",
year = "2010",
abstract = "Polyaniline electrode, was obtained by electrochemical polymerization at constant current density of 2.0 mA cm-2 from aqueous solution of 1.0 mol dm-3 HCl containing 0.25 mol dm-3 aniline. Electrochemical characterization of the polyaniline electrode in chloride and chloride/citrate electrolyte, for different anodic potential limits, was performed using cyclic voltammetry and galvanostatic measurements. It was observed that for anodic potential 0.32 V, higher electrode capacity in chloride/citrate was obtained. For anodic potential limit of 0.50 V, faster decrease of the electrode capacity in chloride/citrate electrolyte was also observed. It was suggested that influence of both chloride and citrate anions has to be taken into account.",
publisher = "Nice : International Society of Electrochemistry",
journal = "The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biol",
title = "Electrochemical characterization of electrochemically polymerized polyaniline in citrate containing electrolyte",
pages = "s05-P-054",
url = "https://hdl.handle.net/21.15107/rcub_technorep_1570"
}

Jugović, B., Gvozdenović, M., Stevanović, J., Trišović, T.,& Grgur, B.. (2010). Electrochemical characterization of electrochemically polymerized polyaniline in citrate containing electrolyte. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biol
Nice : International Society of Electrochemistry., s05-P-054.
https://hdl.handle.net/21.15107/rcub_technorep_1570

Jugović B, Gvozdenović M, Stevanović J, Trišović T, Grgur B. Electrochemical characterization of electrochemically polymerized polyaniline in citrate containing electrolyte. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biol. 2010;:s05-P-054.
https://hdl.handle.net/21.15107/rcub_technorep_1570 .

Jugović, Branimir, Gvozdenović, Milica, Stevanović, Jasmina, Trišović, Tomislav, Grgur, Branimir, "Electrochemical characterization of electrochemically polymerized polyaniline in citrate containing electrolyte" in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biol (2010):s05-P-054,
https://hdl.handle.net/21.15107/rcub_technorep_1570 .

TY  - CONF
AU  - Jugović, Branimir
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina
AU  - Gvozdenović, Milica
AU  - Grgur, Branimir
PY  - 2010
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1534
AB  - Poster presented at the 37th International conference of the Slovak Society of Chemical Engineering, Vysoké Tatry, Slovakia, May 24-28, 2010
T1  - Improved electrolyte for zinc-polyaniline batteries
UR  - https://hdl.handle.net/21.15107/rcub_technorep_1534
ER  - 

@conference{
author = "Jugović, Branimir and Trišović, Tomislav and Stevanović, Jasmina and Gvozdenović, Milica and Grgur, Branimir",
year = "2010",
abstract = "Poster presented at the 37th International conference of the Slovak Society of Chemical Engineering, Vysoké Tatry, Slovakia, May 24-28, 2010",
title = "Improved electrolyte for zinc-polyaniline batteries",
url = "https://hdl.handle.net/21.15107/rcub_technorep_1534"
}

Jugović, B., Trišović, T., Stevanović, J., Gvozdenović, M.,& Grgur, B.. (2010). Improved electrolyte for zinc-polyaniline batteries. .
https://hdl.handle.net/21.15107/rcub_technorep_1534

Jugović B, Trišović T, Stevanović J, Gvozdenović M, Grgur B. Improved electrolyte for zinc-polyaniline batteries. 2010;.
https://hdl.handle.net/21.15107/rcub_technorep_1534 .

Jugović, Branimir, Trišović, Tomislav, Stevanović, Jasmina, Gvozdenović, Milica, Grgur, Branimir, "Improved electrolyte for zinc-polyaniline batteries" (2010),
https://hdl.handle.net/21.15107/rcub_technorep_1534 .

TY  - CONF
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica
AU  - Grgur, Branimir
PY  - 2010
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1574
AB  - Corrosion behavior of magnesium, aluminum and zinc in 0.2 mol dm-3 NH4Cl; 0.1 mol dm-3 NH4Cl with addition of 0.1 mol dm-3 Na-citrate and corrosion behavior of zinc in 0.3 mol dm-3 NH4Cl with addition of 0.8 mol dm-3 Na-citrate and different concentration of ZnCl2 were investigated. Corrosion current densities were determined from the mass lost and from potentiodinamic (1 mV s-1) measurements. It was concluded that magnesium and aluminum are not suitable anodic materials for use in primary electrochemical power sources. On the other hand, it was concluded that zinc could be considered as possible anodic material in both primary and secondary electrochemical power sources.
PB  - Nice : International Society of Electrochemistry
C3  - The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biol
T1  - Corrosion studies of magnesium, aluminum and zinc in citrate containing electrolytes
SP  - s06-P-010
UR  - https://hdl.handle.net/21.15107/rcub_technorep_1574
ER  - 

@conference{
author = "Jugović, Branimir and Gvozdenović, Milica and Grgur, Branimir",
year = "2010",
abstract = "Corrosion behavior of magnesium, aluminum and zinc in 0.2 mol dm-3 NH4Cl; 0.1 mol dm-3 NH4Cl with addition of 0.1 mol dm-3 Na-citrate and corrosion behavior of zinc in 0.3 mol dm-3 NH4Cl with addition of 0.8 mol dm-3 Na-citrate and different concentration of ZnCl2 were investigated. Corrosion current densities were determined from the mass lost and from potentiodinamic (1 mV s-1) measurements. It was concluded that magnesium and aluminum are not suitable anodic materials for use in primary electrochemical power sources. On the other hand, it was concluded that zinc could be considered as possible anodic material in both primary and secondary electrochemical power sources.",
publisher = "Nice : International Society of Electrochemistry",
journal = "The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biol",
title = "Corrosion studies of magnesium, aluminum and zinc in citrate containing electrolytes",
pages = "s06-P-010",
url = "https://hdl.handle.net/21.15107/rcub_technorep_1574"
}

Jugović, B., Gvozdenović, M.,& Grgur, B.. (2010). Corrosion studies of magnesium, aluminum and zinc in citrate containing electrolytes. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biol
Nice : International Society of Electrochemistry., s06-P-010.
https://hdl.handle.net/21.15107/rcub_technorep_1574

Jugović B, Gvozdenović M, Grgur B. Corrosion studies of magnesium, aluminum and zinc in citrate containing electrolytes. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biol. 2010;:s06-P-010.
https://hdl.handle.net/21.15107/rcub_technorep_1574 .

Jugović, Branimir, Gvozdenović, Milica, Grgur, Branimir, "Corrosion studies of magnesium, aluminum and zinc in citrate containing electrolytes" in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biol (2010):s06-P-010,
https://hdl.handle.net/21.15107/rcub_technorep_1574 .

TY  - JOUR
AU  - Marković, R.
AU  - Friedrich, Bernd
AU  - Stajić-Trošić, Jasna
AU  - Jordović, Branka
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica
AU  - Stevanović, Jasmina
PY  - 2010
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1584
AB  - This paper addresses on investigation the possibility of electrolytic treatment the sulphur acidic waste solution, obtained in the conventional electrolytic copper refining process. Beside the high copper concentration, the high concentration of other metals, in this case nickel, is the main characteristic of these waste solutions. Due to this fact, the copper bearing anodes with non-standard nickel, lead, tin and antimony content were specially prepared for the refining process. Nickel content of all anodes was approximately 7.5 mass%, and the content of lead, tin and antimony was varied. The preliminary results, obtained using the standard electrochemical techniques, have indicated that the copper bearing anodes could be used under the same conditions as well as in the conventional copper refining process. The measurements in constant galvanostatic pulse have pointed out that the all chemical elements from copper bearing anodes were dissolved and only copper was deposited onto the cathode. It was also pointed out that Ni concentration in the base working electrolyte (sulphur acidic waste solution), after 72 h of process, increased to 102 mass% at T-1 = 63 +/- 2 degrees C and up to 122 mass% at T-1 = 73 +/- 2 degrees C, while arsenic concentration decreased to a minimum value.
PB  - Elsevier Science Bv, Amsterdam
T2  - Journal of Hazardous Materials
T1  - Behaviour of non-standard composition copper bearing anodes from the copper refining process
EP  - 63
IS  - 1-3
SP  - 55
VL  - 182
DO  - 10.1016/j.jhazmat.2010.05.137
ER  - 

@article{
author = "Marković, R. and Friedrich, Bernd and Stajić-Trošić, Jasna and Jordović, Branka and Jugović, Branimir and Gvozdenović, Milica and Stevanović, Jasmina",
year = "2010",
abstract = "This paper addresses on investigation the possibility of electrolytic treatment the sulphur acidic waste solution, obtained in the conventional electrolytic copper refining process. Beside the high copper concentration, the high concentration of other metals, in this case nickel, is the main characteristic of these waste solutions. Due to this fact, the copper bearing anodes with non-standard nickel, lead, tin and antimony content were specially prepared for the refining process. Nickel content of all anodes was approximately 7.5 mass%, and the content of lead, tin and antimony was varied. The preliminary results, obtained using the standard electrochemical techniques, have indicated that the copper bearing anodes could be used under the same conditions as well as in the conventional copper refining process. The measurements in constant galvanostatic pulse have pointed out that the all chemical elements from copper bearing anodes were dissolved and only copper was deposited onto the cathode. It was also pointed out that Ni concentration in the base working electrolyte (sulphur acidic waste solution), after 72 h of process, increased to 102 mass% at T-1 = 63 +/- 2 degrees C and up to 122 mass% at T-1 = 73 +/- 2 degrees C, while arsenic concentration decreased to a minimum value.",
publisher = "Elsevier Science Bv, Amsterdam",
journal = "Journal of Hazardous Materials",
title = "Behaviour of non-standard composition copper bearing anodes from the copper refining process",
pages = "63-55",
number = "1-3",
volume = "182",
doi = "10.1016/j.jhazmat.2010.05.137"
}

Marković, R., Friedrich, B., Stajić-Trošić, J., Jordović, B., Jugović, B., Gvozdenović, M.,& Stevanović, J.. (2010). Behaviour of non-standard composition copper bearing anodes from the copper refining process. in Journal of Hazardous Materials
Elsevier Science Bv, Amsterdam., 182(1-3), 55-63.
https://doi.org/10.1016/j.jhazmat.2010.05.137

Marković R, Friedrich B, Stajić-Trošić J, Jordović B, Jugović B, Gvozdenović M, Stevanović J. Behaviour of non-standard composition copper bearing anodes from the copper refining process. in Journal of Hazardous Materials. 2010;182(1-3):55-63.
doi:10.1016/j.jhazmat.2010.05.137 .

Marković, R., Friedrich, Bernd, Stajić-Trošić, Jasna, Jordović, Branka, Jugović, Branimir, Gvozdenović, Milica, Stevanović, Jasmina, "Behaviour of non-standard composition copper bearing anodes from the copper refining process" in Journal of Hazardous Materials, 182, no. 1-3 (2010):55-63,
https://doi.org/10.1016/j.jhazmat.2010.05.137 . .

TY  - JOUR
AU  - Živković, Predrag M.
AU  - Nikolić, Nebojša D.
AU  - Gvozdenović, Milica
AU  - Popov, Konstantin I.
PY  - 2009
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1378
AB  - The effect of the concentration of the reacting ion on the nature of the control of the electrodeposition process was investigated by digital simulation of the polarization curve using the Newman form of the polarization curve equation and the Levich dependence of the limiting diffusion current density under natural convection conditions. A simple method for the determination of the exchange current density from polarization measurements is also proposed. The agreement with experiments was correct.
AB  - U radu je ispitivan uticaj koncentracije reagujućeg jona na vrstu kontrole procesa elektrohemijskog taloženja. Primenjena je digitalna simulacija polarizacionih krivih na osnovu Newman-ovog oblika jednačine polarizacione krive i Levich-eve zavisnosti granične difuzione gustine struje u uslovima prirodne konvekcije. Predložen je jednostavan metod određivanja gustine struje izmene na osnovu polarizacionih merenja. Dobijena je zadovoljavajuća saglasnost sa eksperimentalno dobijenim vrednostima.
PB  - Serbian Chemical Society, Belgrade
T2  - Journal of the Serbian Chemical Society
T1  - The effect of the concentration of the reacting ion on the control of the electrodeposition process
T1  - Uticaj koncentracije reagujućeg jona na kontrolu procesa elektrohemijskog taloženja
EP  - 299
IS  - 3
SP  - 291
VL  - 74
UR  - https://hdl.handle.net/21.15107/rcub_technorep_1378
ER  - 

@article{
author = "Živković, Predrag M. and Nikolić, Nebojša D. and Gvozdenović, Milica and Popov, Konstantin I.",
year = "2009",
abstract = "The effect of the concentration of the reacting ion on the nature of the control of the electrodeposition process was investigated by digital simulation of the polarization curve using the Newman form of the polarization curve equation and the Levich dependence of the limiting diffusion current density under natural convection conditions. A simple method for the determination of the exchange current density from polarization measurements is also proposed. The agreement with experiments was correct., U radu je ispitivan uticaj koncentracije reagujućeg jona na vrstu kontrole procesa elektrohemijskog taloženja. Primenjena je digitalna simulacija polarizacionih krivih na osnovu Newman-ovog oblika jednačine polarizacione krive i Levich-eve zavisnosti granične difuzione gustine struje u uslovima prirodne konvekcije. Predložen je jednostavan metod određivanja gustine struje izmene na osnovu polarizacionih merenja. Dobijena je zadovoljavajuća saglasnost sa eksperimentalno dobijenim vrednostima.",
publisher = "Serbian Chemical Society, Belgrade",
journal = "Journal of the Serbian Chemical Society",
title = "The effect of the concentration of the reacting ion on the control of the electrodeposition process, Uticaj koncentracije reagujućeg jona na kontrolu procesa elektrohemijskog taloženja",
pages = "299-291",
number = "3",
volume = "74",
url = "https://hdl.handle.net/21.15107/rcub_technorep_1378"
}

Živković, P. M., Nikolić, N. D., Gvozdenović, M.,& Popov, K. I.. (2009). The effect of the concentration of the reacting ion on the control of the electrodeposition process. in Journal of the Serbian Chemical Society
Serbian Chemical Society, Belgrade., 74(3), 291-299.
https://hdl.handle.net/21.15107/rcub_technorep_1378

Živković PM, Nikolić ND, Gvozdenović M, Popov KI. The effect of the concentration of the reacting ion on the control of the electrodeposition process. in Journal of the Serbian Chemical Society. 2009;74(3):291-299.
https://hdl.handle.net/21.15107/rcub_technorep_1378 .

Živković, Predrag M., Nikolić, Nebojša D., Gvozdenović, Milica, Popov, Konstantin I., "The effect of the concentration of the reacting ion on the control of the electrodeposition process" in Journal of the Serbian Chemical Society, 74, no. 3 (2009):291-299,
https://hdl.handle.net/21.15107/rcub_technorep_1378 .

TY  - JOUR
AU  - Gvozdenović, Milica
AU  - Grgur, Branimir
PY  - 2009
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1508
AB  - Electrochemical synthesis of polyaniline (PANI) on aluminum electrode from aqueous Solution Of 0.25 mol dm(-3) aniline and 0.2 mol dm(-3) sodium benzoate has been investigated under potentiodynamic and galvanostatic conditions. Initial corrosion behavior of aluminum and PANI coated aluminum electrode exposed to 3% NaCl has been investigated using electrochemical potentiodynamic and impedance spectroscopy technique (EIS). It was shown that PANI coating initially provide corrosion protection of aluminum, decreasing the corrosion current density at least 15 times.
PB  - Elsevier Science Sa, Lausanne
T2  - Progress in Organic Coatings
T1  - Electrochemical polymerization and initial corrosion properties of polyaniline-benzoate film on aluminum
EP  - 404
IS  - 3
SP  - 401
VL  - 65
DO  - 10.1016/j.porgcoat.2009.01.004
ER  - 

@article{
author = "Gvozdenović, Milica and Grgur, Branimir",
year = "2009",
abstract = "Electrochemical synthesis of polyaniline (PANI) on aluminum electrode from aqueous Solution Of 0.25 mol dm(-3) aniline and 0.2 mol dm(-3) sodium benzoate has been investigated under potentiodynamic and galvanostatic conditions. Initial corrosion behavior of aluminum and PANI coated aluminum electrode exposed to 3% NaCl has been investigated using electrochemical potentiodynamic and impedance spectroscopy technique (EIS). It was shown that PANI coating initially provide corrosion protection of aluminum, decreasing the corrosion current density at least 15 times.",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Progress in Organic Coatings",
title = "Electrochemical polymerization and initial corrosion properties of polyaniline-benzoate film on aluminum",
pages = "404-401",
number = "3",
volume = "65",
doi = "10.1016/j.porgcoat.2009.01.004"
}

Gvozdenović, M.,& Grgur, B.. (2009). Electrochemical polymerization and initial corrosion properties of polyaniline-benzoate film on aluminum. in Progress in Organic Coatings
Elsevier Science Sa, Lausanne., 65(3), 401-404.
https://doi.org/10.1016/j.porgcoat.2009.01.004

Gvozdenović M, Grgur B. Electrochemical polymerization and initial corrosion properties of polyaniline-benzoate film on aluminum. in Progress in Organic Coatings. 2009;65(3):401-404.
doi:10.1016/j.porgcoat.2009.01.004 .

Gvozdenović, Milica, Grgur, Branimir, "Electrochemical polymerization and initial corrosion properties of polyaniline-benzoate film on aluminum" in Progress in Organic Coatings, 65, no. 3 (2009):401-404,
https://doi.org/10.1016/j.porgcoat.2009.01.004 . .

TY  - JOUR
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica
AU  - Stevanović, Jasmina
AU  - Trišović, Tomislav
AU  - Grgur, Branimir
PY  - 2009
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1486
AB  - Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 moldm-3 HCl and 0.25 mol dm-3 aniline monomer. Electrochemical characterization of the PANI electrode was performed in 0.5 mol dm-3 HCl using cyclic voltammetry and galvanostatic measurements. The overall charge capacity of the PANI electrode was estimated to be 0.154 mA h cm-2, which corresponds to 25% of the theoretical mass of PANI available for doping exchange. It was observed that during initial cyclization at low pH, the extent of PANI degradation products was insigni cant and practically had no infuence on the charge/discharge characteristics of the PANI electrode. .
AB  - Polianilin na grafitnoj elektrodi je sintetisan elektrohemijski pod galvanostatskim režimom taloženja pri gustini struje od 2.0 mA cm-1 iz rastvora 1.0 mol dm-3 HCl i 0.25 mol dm-3 anilina. Elektrohemijska karakterizacija PANI elektrode je urađena u rastvoru 0.5 M HCl cikličnom voltametrijom i galvanostatskim merenjima. Kapacitet PANI elektrode je izračunat na 0.154 mA h cm-2 što odgovara 25 % od teoretske mase PANI koja može da razmeni dopante. Tokom ciklizacije pri niskim rN vrednostima udeo udeo degradacionih produkata je mali i nema uticaj na kapacitet PANI elektrode. .
PB  - Engineering Society for Corrosion, Belgrade, Serbia
T2  - Zaštita materijala
T1  - Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources
T1  - Elektrohemijska sinteza i karakterizacija elektrode od polianilina za potencijalnu upotrebu u elektrohemijskim izvorima energije
EP  - 33
IS  - 1
SP  - 29
VL  - 50
UR  - https://hdl.handle.net/21.15107/rcub_technorep_1486
ER  - 

@article{
author = "Jugović, Branimir and Gvozdenović, Milica and Stevanović, Jasmina and Trišović, Tomislav and Grgur, Branimir",
year = "2009",
abstract = "Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 moldm-3 HCl and 0.25 mol dm-3 aniline monomer. Electrochemical characterization of the PANI electrode was performed in 0.5 mol dm-3 HCl using cyclic voltammetry and galvanostatic measurements. The overall charge capacity of the PANI electrode was estimated to be 0.154 mA h cm-2, which corresponds to 25% of the theoretical mass of PANI available for doping exchange. It was observed that during initial cyclization at low pH, the extent of PANI degradation products was insigni cant and practically had no infuence on the charge/discharge characteristics of the PANI electrode. ., Polianilin na grafitnoj elektrodi je sintetisan elektrohemijski pod galvanostatskim režimom taloženja pri gustini struje od 2.0 mA cm-1 iz rastvora 1.0 mol dm-3 HCl i 0.25 mol dm-3 anilina. Elektrohemijska karakterizacija PANI elektrode je urađena u rastvoru 0.5 M HCl cikličnom voltametrijom i galvanostatskim merenjima. Kapacitet PANI elektrode je izračunat na 0.154 mA h cm-2 što odgovara 25 % od teoretske mase PANI koja može da razmeni dopante. Tokom ciklizacije pri niskim rN vrednostima udeo udeo degradacionih produkata je mali i nema uticaj na kapacitet PANI elektrode. .",
publisher = "Engineering Society for Corrosion, Belgrade, Serbia",
journal = "Zaštita materijala",
title = "Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources, Elektrohemijska sinteza i karakterizacija elektrode od polianilina za potencijalnu upotrebu u elektrohemijskim izvorima energije",
pages = "33-29",
number = "1",
volume = "50",
url = "https://hdl.handle.net/21.15107/rcub_technorep_1486"
}

Jugović, B., Gvozdenović, M., Stevanović, J., Trišović, T.,& Grgur, B.. (2009). Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources. in Zaštita materijala
Engineering Society for Corrosion, Belgrade, Serbia., 50(1), 29-33.
https://hdl.handle.net/21.15107/rcub_technorep_1486

Jugović B, Gvozdenović M, Stevanović J, Trišović T, Grgur B. Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources. in Zaštita materijala. 2009;50(1):29-33.
https://hdl.handle.net/21.15107/rcub_technorep_1486 .

Jugović, Branimir, Gvozdenović, Milica, Stevanović, Jasmina, Trišović, Tomislav, Grgur, Branimir, "Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources" in Zaštita materijala, 50, no. 1 (2009):29-33,
https://hdl.handle.net/21.15107/rcub_technorep_1486 .

TY  - JOUR
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica
AU  - Stevanović, Jasmina
AU  - Trišović, Tomislav
AU  - Grgur, Branimir
PY  - 2009
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1359
AB  - Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 moldm-3 HCl and 0.25 mol dm-3 aniline monomer. Electrochemical characterization of the PANI electrode was performed in 0.5 mol dm-3 HCl using cyclic voltammetry and galvanostatic measurements. The overall charge capacity of the PANI electrode was estimated to be 0.154 mA h cm-2, which corresponds to 25% of the theoretical mass of PANI available for doping exchange. It was observed that during initial cyclization at low pH, the extent of PANI degradation products was insigni cant and practically had no infuence on the charge/discharge characteristics of the PANI electrode. .
AB  - Polianilin na grafitnoj elektrodi je sintetisan elektrohemijski pod galvanostatskim režimom taloženja pri gustini struje od 2.0 mA cm-1 iz rastvora 1.0 mol dm-3 HCl i 0.25 mol dm-3 anilina. Elektrohemijska karakterizacija PANI elektrode je urađena u rastvoru 0.5 M HCl cikličnom voltametrijom i galvanostatskim merenjima. Kapacitet PANI elektrode je izračunat na 0.154 mA h cm-2 što odgovara 25 % od teoretske mase PANI koja može da razmeni dopante. Tokom ciklizacije pri niskim rN vrednostima udeo udeo degradacionih produkata je mali i nema uticaj na kapacitet PANI elektrode. .
PB  - Inženjersko društvo za koroziju, Beograd
T2  - Zaštita materijala
T1  - Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources
T1  - Elektrohemijska sinteza i karakterizacija elektrode od polianilina za potencijalnu upotrebu u elektrohemijskim izvorima energije
EP  - 33
IS  - 1
SP  - 29
VL  - 50
UR  - https://hdl.handle.net/21.15107/rcub_technorep_1359
ER  - 

@article{
author = "Jugović, Branimir and Gvozdenović, Milica and Stevanović, Jasmina and Trišović, Tomislav and Grgur, Branimir",
year = "2009",
abstract = "Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 moldm-3 HCl and 0.25 mol dm-3 aniline monomer. Electrochemical characterization of the PANI electrode was performed in 0.5 mol dm-3 HCl using cyclic voltammetry and galvanostatic measurements. The overall charge capacity of the PANI electrode was estimated to be 0.154 mA h cm-2, which corresponds to 25% of the theoretical mass of PANI available for doping exchange. It was observed that during initial cyclization at low pH, the extent of PANI degradation products was insigni cant and practically had no infuence on the charge/discharge characteristics of the PANI electrode. ., Polianilin na grafitnoj elektrodi je sintetisan elektrohemijski pod galvanostatskim režimom taloženja pri gustini struje od 2.0 mA cm-1 iz rastvora 1.0 mol dm-3 HCl i 0.25 mol dm-3 anilina. Elektrohemijska karakterizacija PANI elektrode je urađena u rastvoru 0.5 M HCl cikličnom voltametrijom i galvanostatskim merenjima. Kapacitet PANI elektrode je izračunat na 0.154 mA h cm-2 što odgovara 25 % od teoretske mase PANI koja može da razmeni dopante. Tokom ciklizacije pri niskim rN vrednostima udeo udeo degradacionih produkata je mali i nema uticaj na kapacitet PANI elektrode. .",
publisher = "Inženjersko društvo za koroziju, Beograd",
journal = "Zaštita materijala",
title = "Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources, Elektrohemijska sinteza i karakterizacija elektrode od polianilina za potencijalnu upotrebu u elektrohemijskim izvorima energije",
pages = "33-29",
number = "1",
volume = "50",
url = "https://hdl.handle.net/21.15107/rcub_technorep_1359"
}

Jugović, B., Gvozdenović, M., Stevanović, J., Trišović, T.,& Grgur, B.. (2009). Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources. in Zaštita materijala
Inženjersko društvo za koroziju, Beograd., 50(1), 29-33.
https://hdl.handle.net/21.15107/rcub_technorep_1359

Jugović B, Gvozdenović M, Stevanović J, Trišović T, Grgur B. Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources. in Zaštita materijala. 2009;50(1):29-33.
https://hdl.handle.net/21.15107/rcub_technorep_1359 .

Jugović, Branimir, Gvozdenović, Milica, Stevanović, Jasmina, Trišović, Tomislav, Grgur, Branimir, "Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources" in Zaštita materijala, 50, no. 1 (2009):29-33,
https://hdl.handle.net/21.15107/rcub_technorep_1359 .

TY  - JOUR
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica
AU  - Stevanović, Jasmina
AU  - Trišović, Tomislav
AU  - Grgur, Branimir
PY  - 2009
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1484
AB  - Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm(-2) from aqueous solution of 1.0 mol dm(-3) HCl and 0.25 mol dm(-3) aniline monomer. Electrochemical characterization of the PANI electrode was performed in 0.5 mol dm(-3) HCl using cyclic voltammetry and galvanostatic measurements. The overall charge capacity of the PANI electrode was estimated to be 0.154 mAh cm(-2), which corresponds to 25% of the theoretical mass of PANI available for doping exchange. It was observed that during initial cyclization at low pH, the extent of PANI degradation products was insignificant and practically had no influence on the charge/discharge characteristics of the PANI electrode.
PB  - Elsevier Science Sa, Lausanne
T2  - Materials Chemistry and Physics
T1  - Characterization of electrochemically synthesized PANI on graphite electrode for potential use in electrochemical power sources
EP  - 942
IS  - 2-3
SP  - 939
VL  - 114
DO  - 10.1016/j.matchemphys.2008.10.069
ER  - 

@article{
author = "Jugović, Branimir and Gvozdenović, Milica and Stevanović, Jasmina and Trišović, Tomislav and Grgur, Branimir",
year = "2009",
abstract = "Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm(-2) from aqueous solution of 1.0 mol dm(-3) HCl and 0.25 mol dm(-3) aniline monomer. Electrochemical characterization of the PANI electrode was performed in 0.5 mol dm(-3) HCl using cyclic voltammetry and galvanostatic measurements. The overall charge capacity of the PANI electrode was estimated to be 0.154 mAh cm(-2), which corresponds to 25% of the theoretical mass of PANI available for doping exchange. It was observed that during initial cyclization at low pH, the extent of PANI degradation products was insignificant and practically had no influence on the charge/discharge characteristics of the PANI electrode.",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Materials Chemistry and Physics",
title = "Characterization of electrochemically synthesized PANI on graphite electrode for potential use in electrochemical power sources",
pages = "942-939",
number = "2-3",
volume = "114",
doi = "10.1016/j.matchemphys.2008.10.069"
}

Jugović, B., Gvozdenović, M., Stevanović, J., Trišović, T.,& Grgur, B.. (2009). Characterization of electrochemically synthesized PANI on graphite electrode for potential use in electrochemical power sources. in Materials Chemistry and Physics
Elsevier Science Sa, Lausanne., 114(2-3), 939-942.
https://doi.org/10.1016/j.matchemphys.2008.10.069

Jugović B, Gvozdenović M, Stevanović J, Trišović T, Grgur B. Characterization of electrochemically synthesized PANI on graphite electrode for potential use in electrochemical power sources. in Materials Chemistry and Physics. 2009;114(2-3):939-942.
doi:10.1016/j.matchemphys.2008.10.069 .

Jugović, Branimir, Gvozdenović, Milica, Stevanović, Jasmina, Trišović, Tomislav, Grgur, Branimir, "Characterization of electrochemically synthesized PANI on graphite electrode for potential use in electrochemical power sources" in Materials Chemistry and Physics, 114, no. 2-3 (2009):939-942,
https://doi.org/10.1016/j.matchemphys.2008.10.069 . .

TY  - JOUR
AU  - Jugović, Branimir
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina
AU  - Gvozdenović, Milica
AU  - Grgur, Branimir
PY  - 2009
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1427
AB  - Electrochemical behavior of zinc and thin polyaniline (PANI) electrodes in citrate/chloride-contained electrolyte has been investigated by the means of electrolyte composition optimization. Electrolyte contained 0.8 M sodium citrate, 0.3 M ammonium chloride, and similar to 0.3 M zinc chloride has been found to be an optimum electrolyte for the further applications in the real zinc-polyaniline citrate/chloride-based secondary cell.
PB  - Springer, Dordrecht
T2  - Journal of Applied Electrochemistry
T1  - Citrate-based zinc-polyaniline secondary cell: part I: optimization of the citrate/chloride electrolyte
EP  - 2528
IS  - 12
SP  - 2521
VL  - 39
DO  - 10.1007/s10800-009-9946-7
ER  - 

@article{
author = "Jugović, Branimir and Trišović, Tomislav and Stevanović, Jasmina and Gvozdenović, Milica and Grgur, Branimir",
year = "2009",
abstract = "Electrochemical behavior of zinc and thin polyaniline (PANI) electrodes in citrate/chloride-contained electrolyte has been investigated by the means of electrolyte composition optimization. Electrolyte contained 0.8 M sodium citrate, 0.3 M ammonium chloride, and similar to 0.3 M zinc chloride has been found to be an optimum electrolyte for the further applications in the real zinc-polyaniline citrate/chloride-based secondary cell.",
publisher = "Springer, Dordrecht",
journal = "Journal of Applied Electrochemistry",
title = "Citrate-based zinc-polyaniline secondary cell: part I: optimization of the citrate/chloride electrolyte",
pages = "2528-2521",
number = "12",
volume = "39",
doi = "10.1007/s10800-009-9946-7"
}

Jugović, B., Trišović, T., Stevanović, J., Gvozdenović, M.,& Grgur, B.. (2009). Citrate-based zinc-polyaniline secondary cell: part I: optimization of the citrate/chloride electrolyte. in Journal of Applied Electrochemistry
Springer, Dordrecht., 39(12), 2521-2528.
https://doi.org/10.1007/s10800-009-9946-7

Jugović B, Trišović T, Stevanović J, Gvozdenović M, Grgur B. Citrate-based zinc-polyaniline secondary cell: part I: optimization of the citrate/chloride electrolyte. in Journal of Applied Electrochemistry. 2009;39(12):2521-2528.
doi:10.1007/s10800-009-9946-7 .

Jugović, Branimir, Trišović, Tomislav, Stevanović, Jasmina, Gvozdenović, Milica, Grgur, Branimir, "Citrate-based zinc-polyaniline secondary cell: part I: optimization of the citrate/chloride electrolyte" in Journal of Applied Electrochemistry, 39, no. 12 (2009):2521-2528,
https://doi.org/10.1007/s10800-009-9946-7 . .

TY  - JOUR
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica
AU  - Stevanović, Jasmina
AU  - Trišović, Tomislav
AU  - Grgur, Branimir
PY  - 2009
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1437
AB  - Corrosion behavior of magnesium, aluminum and zinc in 0.2 mol dm(-3) NH4Cl; 0.1 mol dm(-3) NH4Cl with addition of 0.1 mol dm(-3) Na-citrate and corrosion behavior of zinc in 0.3 mol dm-3 NH4Cl with addition of 0.8 mol dm(-3) Na-citrate and different concentration of ZnCl2 were investigated. Corrosion current densities were determinated from the mass lost and from potentiodynamic (1 mV s(-1)) measurements. It was concluded that magnesium and aluminum are not suitable anodic materials for use in primary electrochemical power sources. On the other hand, it was concluded that zinc could be considered as possible anodic material in both primary and secondary electrochemical power sources.
PB  - Elsevier Sci Ltd, Oxford
T2  - Materials & Design
T1  - Corrosion behavior of magnesium, aluminum and zinc as anodic materials in chloride based electrolytes for use in primary and secondary electrochemical power sources
EP  - 3294
IS  - 8
SP  - 3291
VL  - 30
DO  - 10.1016/j.matdes.2008.12.019
ER  - 

@article{
author = "Jugović, Branimir and Gvozdenović, Milica and Stevanović, Jasmina and Trišović, Tomislav and Grgur, Branimir",
year = "2009",
abstract = "Corrosion behavior of magnesium, aluminum and zinc in 0.2 mol dm(-3) NH4Cl; 0.1 mol dm(-3) NH4Cl with addition of 0.1 mol dm(-3) Na-citrate and corrosion behavior of zinc in 0.3 mol dm-3 NH4Cl with addition of 0.8 mol dm(-3) Na-citrate and different concentration of ZnCl2 were investigated. Corrosion current densities were determinated from the mass lost and from potentiodynamic (1 mV s(-1)) measurements. It was concluded that magnesium and aluminum are not suitable anodic materials for use in primary electrochemical power sources. On the other hand, it was concluded that zinc could be considered as possible anodic material in both primary and secondary electrochemical power sources.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Materials & Design",
title = "Corrosion behavior of magnesium, aluminum and zinc as anodic materials in chloride based electrolytes for use in primary and secondary electrochemical power sources",
pages = "3294-3291",
number = "8",
volume = "30",
doi = "10.1016/j.matdes.2008.12.019"
}

Jugović, B., Gvozdenović, M., Stevanović, J., Trišović, T.,& Grgur, B.. (2009). Corrosion behavior of magnesium, aluminum and zinc as anodic materials in chloride based electrolytes for use in primary and secondary electrochemical power sources. in Materials & Design
Elsevier Sci Ltd, Oxford., 30(8), 3291-3294.
https://doi.org/10.1016/j.matdes.2008.12.019

Jugović B, Gvozdenović M, Stevanović J, Trišović T, Grgur B. Corrosion behavior of magnesium, aluminum and zinc as anodic materials in chloride based electrolytes for use in primary and secondary electrochemical power sources. in Materials & Design. 2009;30(8):3291-3294.
doi:10.1016/j.matdes.2008.12.019 .

Jugović, Branimir, Gvozdenović, Milica, Stevanović, Jasmina, Trišović, Tomislav, Grgur, Branimir, "Corrosion behavior of magnesium, aluminum and zinc as anodic materials in chloride based electrolytes for use in primary and secondary electrochemical power sources" in Materials & Design, 30, no. 8 (2009):3291-3294,
https://doi.org/10.1016/j.matdes.2008.12.019 . .

TY  - JOUR
AU  - Živković, Predrag M.
AU  - Grgur, Branimir
AU  - Popov, Konstantin I.
PY  - 2008
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1350
AB  - Digital simulation was employed for the solution of the general polarization curve equation of metal deposition processes. By approximating the dependence of the exchange current density on concentration with a linear function for one- and two-electron transfer processes, an error lower than 20% was obtained.
AB  - Za rešavanje jednačine opšte polarizacione krive za proces taloženja metala primenjena je digitalna simulacija. Aproksimirajući zavisnost gustine struje izmene od koncentracije linearnom funkcijom, za procese sa jednoelektronskim i dvoelektronskim transferom dobijena je relativna greška koja ne prelazi 20%.
PB  - Serbian Chemical Society, Belgrade
T2  - Journal of the Serbian Chemical Society
T1  - The validity of the general polarization curve equation approximation for the process of metal deposition
T1  - Validnost jednačine aproksimacije opšte polarizacione krive za taloženje metala
EP  - 231
IS  - 2
SP  - 227
VL  - 73
UR  - https://hdl.handle.net/21.15107/rcub_technorep_1350
ER  - 

@article{
author = "Živković, Predrag M. and Grgur, Branimir and Popov, Konstantin I.",
year = "2008",
abstract = "Digital simulation was employed for the solution of the general polarization curve equation of metal deposition processes. By approximating the dependence of the exchange current density on concentration with a linear function for one- and two-electron transfer processes, an error lower than 20% was obtained., Za rešavanje jednačine opšte polarizacione krive za proces taloženja metala primenjena je digitalna simulacija. Aproksimirajući zavisnost gustine struje izmene od koncentracije linearnom funkcijom, za procese sa jednoelektronskim i dvoelektronskim transferom dobijena je relativna greška koja ne prelazi 20%.",
publisher = "Serbian Chemical Society, Belgrade",
journal = "Journal of the Serbian Chemical Society",
title = "The validity of the general polarization curve equation approximation for the process of metal deposition, Validnost jednačine aproksimacije opšte polarizacione krive za taloženje metala",
pages = "231-227",
number = "2",
volume = "73",
url = "https://hdl.handle.net/21.15107/rcub_technorep_1350"
}

Živković, P. M., Grgur, B.,& Popov, K. I.. (2008). The validity of the general polarization curve equation approximation for the process of metal deposition. in Journal of the Serbian Chemical Society
Serbian Chemical Society, Belgrade., 73(2), 227-231.
https://hdl.handle.net/21.15107/rcub_technorep_1350

Živković PM, Grgur B, Popov KI. The validity of the general polarization curve equation approximation for the process of metal deposition. in Journal of the Serbian Chemical Society. 2008;73(2):227-231.
https://hdl.handle.net/21.15107/rcub_technorep_1350 .

Živković, Predrag M., Grgur, Branimir, Popov, Konstantin I., "The validity of the general polarization curve equation approximation for the process of metal deposition" in Journal of the Serbian Chemical Society, 73, no. 2 (2008):227-231,
https://hdl.handle.net/21.15107/rcub_technorep_1350 .

TY  - JOUR
AU  - Grgur, Branimir
AU  - Ristić, V.
AU  - Gvozdenović, Milica
AU  - Maksimović, Miodrag D.
AU  - Jugović, Branimir
PY  - 2008
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1331
AB  - Electrochemically formed thin film polyaniline (PANI) anode and lead dioxide (PbO2) cathode, obtained from sulfuric acid solution, for potential applications as electrode materials in PANI vertical bar H2SO4 vertical bar PbO2 aqueous based rechargeable power sources, have been studied using cyclic voltammetry and galvanostatic techniques. Based on the investigations of half cell reactions, the simulation of the charge/discharge characteristic of the possible cell has been done.
PB  - Elsevier Science Bv, Amsterdam
T2  - Journal of Power Sources
T1  - Polyaniline as possible anode materials for the lead acid batteries
EP  - 640
IS  - 1
SP  - 635
VL  - 180
DO  - 10.1016/j.jpowsour.2008.02.022
ER  - 

@article{
author = "Grgur, Branimir and Ristić, V. and Gvozdenović, Milica and Maksimović, Miodrag D. and Jugović, Branimir",
year = "2008",
abstract = "Electrochemically formed thin film polyaniline (PANI) anode and lead dioxide (PbO2) cathode, obtained from sulfuric acid solution, for potential applications as electrode materials in PANI vertical bar H2SO4 vertical bar PbO2 aqueous based rechargeable power sources, have been studied using cyclic voltammetry and galvanostatic techniques. Based on the investigations of half cell reactions, the simulation of the charge/discharge characteristic of the possible cell has been done.",
publisher = "Elsevier Science Bv, Amsterdam",
journal = "Journal of Power Sources",
title = "Polyaniline as possible anode materials for the lead acid batteries",
pages = "640-635",
number = "1",
volume = "180",
doi = "10.1016/j.jpowsour.2008.02.022"
}

Grgur, B., Ristić, V., Gvozdenović, M., Maksimović, M. D.,& Jugović, B.. (2008). Polyaniline as possible anode materials for the lead acid batteries. in Journal of Power Sources
Elsevier Science Bv, Amsterdam., 180(1), 635-640.
https://doi.org/10.1016/j.jpowsour.2008.02.022

Grgur B, Ristić V, Gvozdenović M, Maksimović MD, Jugović B. Polyaniline as possible anode materials for the lead acid batteries. in Journal of Power Sources. 2008;180(1):635-640.
doi:10.1016/j.jpowsour.2008.02.022 .

Grgur, Branimir, Ristić, V., Gvozdenović, Milica, Maksimović, Miodrag D., Jugović, Branimir, "Polyaniline as possible anode materials for the lead acid batteries" in Journal of Power Sources, 180, no. 1 (2008):635-640,
https://doi.org/10.1016/j.jpowsour.2008.02.022 . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Živković, Predrag M.
AU  - Grgur, Branimir
PY  - 2007
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1075
AB  - The physical model of an inert electrode partially activated with hemispherical microelectrodes was formed by the deposition of silver grains on a graphite substrate. It is shown that the process on the microelectrodes can be under activation control despite the fact that the overall rate is determined by the diffusion layer of the macroelectrode. On the basis of this conclusion a mathematical model of mass transfer on an inert electrode partially covered with active hemispherical particles (microclectrodes) is given and verified qualitatively by appropriate experiments. It was found that the degree of activation does not depend on the size of the particles, but on the ratio of the radius of the particles to the interparticle distance. This means that the quantity of catalyst required for the transformation of an inert electrode into an active one decreases strongly with decreasing active particle size. It was also shown that the maximum current density to the activated inert electrode was equal to the limiting diffusion one to the massive active electrode, as well as that the activity of the modified inert electrode at the same coverage of catalyst strongly depends on the exchange current density of the electrochemical process taking place on it. The larger is the exchange current density, the lower is the quantity of catalyst required for the same effect on the activity of the modified electrode.
PB  - Pergamon-Elsevier Science Ltd, Oxford
T2  - Electrochimica Acta
T1  - Physical and mathematical models of an inert macroelectrode modified with active hemispherical microelectrodes
EP  - 4707
IS  - 14
SP  - 4696
VL  - 52
DO  - 10.1016/j.electacta.2007.01.005
ER  - 

@article{
author = "Popov, Konstantin I. and Živković, Predrag M. and Grgur, Branimir",
year = "2007",
abstract = "The physical model of an inert electrode partially activated with hemispherical microelectrodes was formed by the deposition of silver grains on a graphite substrate. It is shown that the process on the microelectrodes can be under activation control despite the fact that the overall rate is determined by the diffusion layer of the macroelectrode. On the basis of this conclusion a mathematical model of mass transfer on an inert electrode partially covered with active hemispherical particles (microclectrodes) is given and verified qualitatively by appropriate experiments. It was found that the degree of activation does not depend on the size of the particles, but on the ratio of the radius of the particles to the interparticle distance. This means that the quantity of catalyst required for the transformation of an inert electrode into an active one decreases strongly with decreasing active particle size. It was also shown that the maximum current density to the activated inert electrode was equal to the limiting diffusion one to the massive active electrode, as well as that the activity of the modified inert electrode at the same coverage of catalyst strongly depends on the exchange current density of the electrochemical process taking place on it. The larger is the exchange current density, the lower is the quantity of catalyst required for the same effect on the activity of the modified electrode.",
publisher = "Pergamon-Elsevier Science Ltd, Oxford",
journal = "Electrochimica Acta",
title = "Physical and mathematical models of an inert macroelectrode modified with active hemispherical microelectrodes",
pages = "4707-4696",
number = "14",
volume = "52",
doi = "10.1016/j.electacta.2007.01.005"
}

Popov, K. I., Živković, P. M.,& Grgur, B.. (2007). Physical and mathematical models of an inert macroelectrode modified with active hemispherical microelectrodes. in Electrochimica Acta
Pergamon-Elsevier Science Ltd, Oxford., 52(14), 4696-4707.
https://doi.org/10.1016/j.electacta.2007.01.005

Popov KI, Živković PM, Grgur B. Physical and mathematical models of an inert macroelectrode modified with active hemispherical microelectrodes. in Electrochimica Acta. 2007;52(14):4696-4707.
doi:10.1016/j.electacta.2007.01.005 .

Popov, Konstantin I., Živković, Predrag M., Grgur, Branimir, "Physical and mathematical models of an inert macroelectrode modified with active hemispherical microelectrodes" in Electrochimica Acta, 52, no. 14 (2007):4696-4707,
https://doi.org/10.1016/j.electacta.2007.01.005 . .

TY  - JOUR
AU  - Grgur, Branimir
AU  - Živković, Predrag M.
AU  - Gvozdenović, Milica
PY  - 2006
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/955
AB  - Kinetics of the mild steel corrosion protection in 0.1 mol dm(-3) H2SO4 by polypyrrole coatings have been investigated by the means of electrochemical impedance spectroscopy (EIS), cyclic voltammetry, polarization measurements and linear polarization. It has been concluded that during the initial time of immersion the coating resistance parameters increase which was connected with diffusion controlled dedoping of oxalate anions, simultaneously with hydrogen evolution reaction on polymer and dissolution of iron through polymer pores. Dedoping of oxalate anions from the bulk of the polymer decreases the polymer conductivity which provokes decrease of overall corrosion rate. After similar to 40 h, the completely dedoped PPy coating acts as a classical polymer.
PB  - Elsevier Science Sa, Lausanne
T2  - Progress in Organic Coatings
T1  - Kinetics of the mild steel corrosion protection by polypyrrole-oxalate coating in sulfuric acid solution
EP  - 247
IS  - 2-3
SP  - 240
VL  - 56
DO  - 10.1016/j.porgcoat.2006.05.013
ER  - 

@article{
author = "Grgur, Branimir and Živković, Predrag M. and Gvozdenović, Milica",
year = "2006",
abstract = "Kinetics of the mild steel corrosion protection in 0.1 mol dm(-3) H2SO4 by polypyrrole coatings have been investigated by the means of electrochemical impedance spectroscopy (EIS), cyclic voltammetry, polarization measurements and linear polarization. It has been concluded that during the initial time of immersion the coating resistance parameters increase which was connected with diffusion controlled dedoping of oxalate anions, simultaneously with hydrogen evolution reaction on polymer and dissolution of iron through polymer pores. Dedoping of oxalate anions from the bulk of the polymer decreases the polymer conductivity which provokes decrease of overall corrosion rate. After similar to 40 h, the completely dedoped PPy coating acts as a classical polymer.",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Progress in Organic Coatings",
title = "Kinetics of the mild steel corrosion protection by polypyrrole-oxalate coating in sulfuric acid solution",
pages = "247-240",
number = "2-3",
volume = "56",
doi = "10.1016/j.porgcoat.2006.05.013"
}

Grgur, B., Živković, P. M.,& Gvozdenović, M.. (2006). Kinetics of the mild steel corrosion protection by polypyrrole-oxalate coating in sulfuric acid solution. in Progress in Organic Coatings
Elsevier Science Sa, Lausanne., 56(2-3), 240-247.
https://doi.org/10.1016/j.porgcoat.2006.05.013

Grgur B, Živković PM, Gvozdenović M. Kinetics of the mild steel corrosion protection by polypyrrole-oxalate coating in sulfuric acid solution. in Progress in Organic Coatings. 2006;56(2-3):240-247.
doi:10.1016/j.porgcoat.2006.05.013 .

Grgur, Branimir, Živković, Predrag M., Gvozdenović, Milica, "Kinetics of the mild steel corrosion protection by polypyrrole-oxalate coating in sulfuric acid solution" in Progress in Organic Coatings, 56, no. 2-3 (2006):240-247,
https://doi.org/10.1016/j.porgcoat.2006.05.013 . .

TY  - JOUR
AU  - Marinović, Vedrana
AU  - Stevanović, Jasmina S.
AU  - Jugović, Branimir
AU  - Maksimović, M.
PY  - 2006
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/5429
AB  - The catalytic activity for the hydrogen evolution reaction (HER) of Ni/WC composites obtained by electrochemicaldeposition of nickel from a conventional Watt’s bath, using two different ways of depositing the WC particles, wasinvestigated. All the composite coatings exhibited electrocatalytic activity for the HER larger than that of pure Ni inboth alkaline and acid solution. The activity increased with increasing content of WC in the coating and, in thepulsed current regime, with increasing frequency of pulsation. In addition, coatings with smaller particles incorporatedexhibited higher activity than those with larger particles. At a constant potential, an order of magnitudehigher current densities were obtained in some cases.
PB  - Springer
T2  - Journal of Applied Electrochemistry
T1  - Hydrogen evolution on Ni/WC composite coatings
EP  - 1009
IS  - 9
SP  - 1005
VL  - 36
DO  - 10.1007/s10800-006-9168-1
UR  - https://hdl.handle.net/21.15107/rcub_dais_7231
ER  - 

@article{
author = "Marinović, Vedrana and Stevanović, Jasmina S. and Jugović, Branimir and Maksimović, M.",
year = "2006",
abstract = "The catalytic activity for the hydrogen evolution reaction (HER) of Ni/WC composites obtained by electrochemicaldeposition of nickel from a conventional Watt’s bath, using two different ways of depositing the WC particles, wasinvestigated. All the composite coatings exhibited electrocatalytic activity for the HER larger than that of pure Ni inboth alkaline and acid solution. The activity increased with increasing content of WC in the coating and, in thepulsed current regime, with increasing frequency of pulsation. In addition, coatings with smaller particles incorporatedexhibited higher activity than those with larger particles. At a constant potential, an order of magnitudehigher current densities were obtained in some cases.",
publisher = "Springer",
journal = "Journal of Applied Electrochemistry",
title = "Hydrogen evolution on Ni/WC composite coatings",
pages = "1009-1005",
number = "9",
volume = "36",
doi = "10.1007/s10800-006-9168-1",
url = "https://hdl.handle.net/21.15107/rcub_dais_7231"
}

Marinović, V., Stevanović, J. S., Jugović, B.,& Maksimović, M.. (2006). Hydrogen evolution on Ni/WC composite coatings. in Journal of Applied Electrochemistry
Springer., 36(9), 1005-1009.
https://doi.org/10.1007/s10800-006-9168-1
https://hdl.handle.net/21.15107/rcub_dais_7231

Marinović V, Stevanović JS, Jugović B, Maksimović M. Hydrogen evolution on Ni/WC composite coatings. in Journal of Applied Electrochemistry. 2006;36(9):1005-1009.
doi:10.1007/s10800-006-9168-1
https://hdl.handle.net/21.15107/rcub_dais_7231 .

Marinović, Vedrana, Stevanović, Jasmina S., Jugović, Branimir, Maksimović, M., "Hydrogen evolution on Ni/WC composite coatings" in Journal of Applied Electrochemistry, 36, no. 9 (2006):1005-1009,
https://doi.org/10.1007/s10800-006-9168-1 .,
https://hdl.handle.net/21.15107/rcub_dais_7231 .