Search
Now showing items 6681-6690 of 6782
A Life Cycle Energy Assessment for Biogas as Energy Carrier
(Springer International Publishing, 2023)
This chapter aims to evaluate energy flows in the life cycle of biogas utilization (i.e., production of thermal energy, cogeneration, traffic, and production of hydrogen), starting from feedstock and anaerobic digestion, ...
Utilization of the integrated process of supercritical extraction and impregnation for incorporation of helichrysum italicum extract into corn starch xerogel
(Savez hemijskih inženjera, Beograd, 2018)
Supercritical CO2 extraction of Helichrysum italicum and impregnation of starch xerogels with the extract by using an integrated scCO(2) extraction and impregnation process were performed at 350 bar and 40 degrees C in ...
Molybdenum sorption by porous copolymer
(Belgrade : Institute of Technical Sciences of SASA, 2013)
Although being essential for biological functions, molybdenum high concentrations (>5 ppm)
in wastewater and groundwater cause an environmental problem, so its removal becomes greatly
significant. In this study, Mo(VI) ...
Production of lactic acid on liquid distillery stillage / Proizvodnja mlečne kiseline na tečnoj destilerijskoj džibri
(Nacionalno društvo za procesnu tehniku i energetiku u poljoprivredi, Novi Sad, 2011)
Bioethanol produced by fermentation of biomass is one of the most important renewable and ecologically friendly energy resources today. After bioethanol distillation a considerable amount of liquid stillage remains (1 hl ...
Characterization of NiAl layers deposited by atmospheric plasma spray (APS) / Karakterizacija NiAl slojeva deponovanih atmosferskim plazma sprejom (APS)
(Engineering Society for Corrosion, Belgrade, Serbia, 2020)
In this paper analyzed were the mechanical properties and microstructure of the Ni30Al coating layers deposited using atmospheric plasma spray (APS). For deposition of the coating applied was a composite Ni30wt.% Al powder, ...
The influence of thickness on magnetic properties of nanostructured nickel thin films obtained by GLAD technique
(Materials Research Bulletin, 2016)
In this work, nickel (Ni) thin films were deposited by electron beam evaporation of Ni using Glancing Angle Deposition technique onto the glass substrate with the thickness varied from 25 nm to 150 nm. Characterization of ...
Specific characteristics of coating glazes based on basalt
(Elsevier Ltd., 2012)
Investigations in this paper has been carried out in order to define the correlation between specific characteristics of coating glazes based on basalt, fired faience and appearance and the quality of the ceramic product ...
A coupled thermo-mechanical model of friction stir welding
(Vinca Institute of Nuclear Sciences, 2012)
A coupled thermo-mechanical model was developed to study the temperature fields, the plunge force and the plastic deformations of Al alloy 2024-T351 under different rotating speed: 350, 400, and 450 rpm, during the friction ...
Safe-by-design gelatin-modified zinc oxide nanoparticles
(Journal of Nanoparticle Research, 2021)
We report an innovative low-cost wet precipitation synthesis method for gelatin-modified zinc oxide nanoparticles (GM ZnO NPs) at the interface between the gelatin hydrogel and aqueous electrolyte. Diffusion of ammonia ...
New Facile One-Pot Synthesis of Isobutyl Thiocarbamate in Recycling Solvent Mixture
(Minerals, 2021)
The specific objectives of the presented study were related to the optimization of the production process of N-alkyl-, N,N-dialkyl-, and N-cycloalkyl-O-isobutyl thiocarbamate; trial industrial production of N-ethyl-O-isobutyl ...