Претраживање
Приказ резултата 1-10 од 14
Morphology, Structure and Mechanical Properties of Copper Coatings Electrodeposited by Pulsating Current (PC) Regime on Si(111)
(MDPI, Basel, 2020)
Copper electrodeposition on (111)-oriented Si substrate was performed by the pulsating current (PC) regime at various average current densities in the range of 15-70 mAcm(-2), obtained by varying either the frequency (30, ...
Selenate Adsorption from Water Using the Hydrous Iron Oxide-Impregnated Hybrid Polymer
(Metals, 2020)
Hybrid adsorbent, based on the cross-linked copolymer impregnated with hydrous iron oxide, was applied for the first time for Se(VI) adsorption from water. The influence of the initial solution pH, selenate concentration ...
Application of the Flotation Tailings as an Alternative Material for an Acid Mine Drainage Remediation: A Case Study of the Extremely Acidic Lake Robule (Serbia)
(MDPI, Basel, 2020)
Flotation tailings rich in carbonate minerals from the tailings deposit of the copper mine Majdanpek (Serbia) were applied for neutralization of the water taken from the extremely acidic Lake Robule (Bor, Serbia). Tests ...
Influence of Electrolyte Impurities from E-Waste Electrorefining on Copper Extraction Recovery
(Metals, 2021)
In order to reflect possible issues in future sole e-waste processing, an electrolyte of complex chemical composition reflecting system of sole e-waste processing was obtained by following a specially designed pyro-elect ...
Application of the Composite Hardness Models in the Analysis of Mechanical Characteristics of Electrolytically Deposited Copper Coatings: The Effect of the Type of Substrate
(Metals, 2021)
The mechanical characteristics of electrochemically deposited copper coatings have been examined by application of two hardness composite models: the Chicot-Lesage (C-L) and the Cheng-Gao (C-G) models. The 10, 20, 40 and ...
Influence of Pr3+ and CO32- Ions Coupled Substitution on Structural, Optical and Antibacterial Properties of Fluorapatite Nanopowders Obtained by Precipitation
(Metals, 2021)
Coupled substitution of fluorapatite (FAP) crystal lattice plays an important role in the engineering of optically active nanomaterials. Uniform fluorapatite nanopowders doped with praseodymium (Pr3+) and carbonate (CO32-) ...
Zn-Co-CeO2 vs. Zn-Co Coatings: Effect of CeO2 Sol in the Enhancement of the Corrosion Performance of Electrodeposited Composite Coatings
(Metals, 2021)
Electrodeposition and characterization of novel ceria-doped Zn-Co composite coatings was the main goal of this research. Electrodeposited composite coatings were compared to pure Zn-Co coatings obtained under the same ...
Selenate adsorption from water using the hydrous iron oxide-impregnated hybrid polymer
(MDPI, Basel, 2020)
Hybrid adsorbent, based on the cross-linked copolymer impregnated with hydrous iron oxide, was applied for the first time for Se(VI) adsorption from water. The influence of the initial solution pH, selenate concentration ...
Implementation of the Chicot-Lesage Composite Hardness Model in a Determination of Absolute Hardness of Copper Coatings Obtained by the Electrodeposition Processes
(Metals, 2021)
The influence of various electrolysis parameters, such as the type of cathode, composition of the electrolyte and electrolysis time, on the morphology, structure and hardness of copper coatings has been investigated. ...
Recovery of Vanadium (V) Oxyanions by a Magnetic Macroporous Copolymer Nanocomposite Sorbent
(Metals, 2021)
An amino-functionalized magnetic macroporous copolymer of glycidyl methacrylate (GM) and ethylene glycol (E) dimethacrylate (m-poly(GME)-deta) was synthesized, fully characterized, and used to investigate the adsorption ...