Pretraživanje
Prikaz rezultata 1-10 od 62
Electrochemically deposited thin films of amorphous Fe-P alloy Part I. Chemical composition and phase structure characterization
(Elsevier Science Sa, Lausanne, 1998)
Thin Fe-P alloy films (0.5 to 25.0 mu m thick) were electrodeposited from sulfate solutions. The influences of various deposition conditions (current density, time, pH and temperature) on the composition and structure of ...
Epoxy coatings electrodeposited on steel electrochemically modified by Zn-Co alloys / Epoksidne kataforetske prevlake na čeliku modifikovanom Zn-Co legurama
(Engineering Society for Corrosion, Belgrade, Serbia, 2003)
The corrosion behavior of epoxy coatings electrodeposited on steel and steel modified by Zn-Co alloys deposited from chloride and sulphate baths were investigated during exposure to 3 % NaCl. The electrochemical impedance ...
Electrophoretic deposition of thin alumina films from water suspension
(Elsevier, Amsterdam, 2002)
Alumina water suspensions have been prepared for thin alumina film deposition on steel. The type and quantity of deflocculant have been determined using zeta potential and viscosimetric measurements. The deposition was ...
Corrosion behaviour of epoxy coatings electrodeposited on galvanized steel and steel modified by Zn-Ni alloys
(Elsevier Science Sa, Lausanne, 2000)
The electrochemical and transport properties and thermal stability of epoxy coatings electrodeposited on hot-dip galvanized steel and steel modified by Zn-Ni alloys were investigated during exposure to 3% NaCl solution. ...
The study of corrosion stability of organic epoxy protective coatings on aluminium and modified aluminium surfaces
(Soc Brasileira Quimica, Sao Paulo, 2005)
Epoxy coatings were formed by cathodic electrodeposition of an epoxy resin on aluminium and modified aluminium surfaces (phosphatized, chromatized-phosphatized and anodized aluminium) using a constant voltage method (resin ...
Electrochemical properties and thermal stability of epoxy coatings electrodeposited on aluminium and modified aluminium surfaces / Elektrohemijske karakteristike i termička stabilnost epoksidnih kataforetskih prevlaka na aluminijumu i modifikovanim površinama aluminijuma
(Serbian Chemical Society, Belgrade, 2001)
The corrosion behavior of epoxy coatings electrodeposited on aluminum, as well as on electrochemically and chemically modified aluminum were investigated during exposure to 3 % NaCl. Electrochemical impedance spectroscopy ...
Corrosion behaviour of epoxy coatings electrodeposited on steel electrochemically modified by Zn-Ni alloy
(Pergamon-Elsevier Science Ltd, Oxford, 1999)
The corrosion behaviour and thermal stability of epoxy coatings electrodeposited on steel: phosphatised steel and steel previously modified by electrodeposited Zn-Ni alloy was investigated during exposure to 3% NaCl. The ...
Study of thermal stability of epoxy coatings electrodeposited on different substrates
(Elsevier Sci Ltd, Oxford, 1999)
The thermal stability of epoxy coatings electrodeposited on steel, phosphatized steel, steel electrochemically modified by Zn-Ni alloys and aluminium has been investigated. Epoxy coatings were formed by cathodic electrodeposition ...
The electrochemical deposition and corrosion stability of Zn-Mn alloy coatings / Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Mn legura
(Inženjersko društvo za koroziju, Beograd, 2010)
The influence of the type of the deposition solution on the current efficiency during electrodeposition of Zn-Mn alloys was examined. The Zn-Mn alloys were deposited on steel from chloride, sulphate and pyrophosphate plating ...
Electrochemical deposition and characterization of Zn-Co alloys and corrosion protection by electrodeposited epoxy coating on Zn-Co alloy
(Pergamon-Elsevier Science Ltd, Oxford, 2002)
Zn-Co alloys electrochemically deposited on steel under various deposition conditions were investigated. The influence of deposition current density, temperature and composition of deposition solution on the phase structure ...