Претраживање
Приказ резултата 11-20 од 22
Microstructure of new composite electrocatalyst and its anodic behavior for chlorine and oxygen evolution
(Elsevier Sci Ltd, Oxford, 2012)
The first layer of active coating made from a rutile-structured solid solution of ruthenium and titanium dioxides having an average crystal grain size of 30 nm was thermally deposited on an adequately prepared titanium ...
Ex-situ sensitization of ordered TiO2 nanotubes with CdS quantum dots
(Elsevier Sci Ltd, Oxford, 2015)
Ordered titania nanotubes (pore diameter approximate to 90 nm and wall thickness approximate to 10 nm) were obtained by the anodization technique and used for the ex-situ deposition of cadmium sulfide quantum dots (CdS ...
Highly ordered macroporous gamma-alumina prepared by a modified sol-gel method with a PMMA microsphere template for enhanced Pb2+, Ni2+ and Cd2+ removal
(Elsevier Sci Ltd, Oxford, 2017)
The adsorption performance of three-dimensionally ordered macroporous (3DOM) gamma-alumina was investigated for enhanced Pb2+, Ni2+ and Cd2+ removal. The synthesis was based on a modified sol-gel method using a colloidal ...
Supporting information for the article: Vujančević, J., Andričević, P., Bjelajac, A., Đokić, V., Popović, M., Rakočević, Z., Horváth, E., Kollár, M., Náfrádi, B., Schiller, A., Domanski, K., Forró, L., Pavlović, V., Janaćković, Đ., 2019. Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping. Ceramics International 45, 10013–10020. https://doi.org/10.1016/j.ceramint.2019.02.045
(Ceramics International, 2019)
Table S1. Reported methods for nitrogen doping of anodized TiO2 nanotube arrays; Figure S1. SEM images and statistical distributions of outer diameters obtained by analyzing SEM micrographs of 100 nanotubes; Table S2. ...
Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping
(Elsevier Sci Ltd, Oxford, 2019)
Highly ordered, anodically grown TiO2 nanotubes on titanium supports were annealed in ammonia atmosphere in order to incorporate nitrogen doping ( lt = 2 at.%) in the titanium oxide lattice. FESEM micrographs revealed ...
Sr,Mg co-doping of calcium hydroxyapatite: Hydrothermal synthesis, processing, characterization and possible application as dentin substitutes
(Ceramics International, 2022)
The aim of this study was to investigate the influence of binary Sr, Mg ion-doping compared to the single-ion doping effects on the phase composition and morphology of hydrothermally obtained calcium hydroxyapatite (HAP) ...
alpha-Tricalcium phosphate/fluorapatite based composite cements: Synthesis, mechanical properties, and biocompatibility
(Elsevier Sci Ltd, Oxford, 2020)
Composite cements based on alpha-tricalcium phosphate (alpha-TCP) and nanostructured fluorapatite (FAp), alpha-TCP/FAp, appropriate for dental usage as root canal filling material, have been prepared with the improved ...
C-doped TiO2 nanotubes with pulsed laser deposited Bi2O3 films for photovoltaic application
(Ceramics International, 2022)
Anodization was used to obtain a nanotubular TiO2 photoanode on F-SnO2 glass. Subsequent annealing in the CH4 atmosphere promoted the C-doping and improved the crystallinity of the TiO2 nanotubes. The pulsed laser deposition ...
Mechanical properties and thermal shock resistance of anorthite ceramics obtained by slip casting
(Elsevier Ltd., 2024)
Anorthite ceramics (CaAl2Si2O8) was obtained by slip casting of water suspension of kaolin (Al2O3·2SiO2·2H2O) and CaCO3 as a source of CaO. A relative density of 87 % of the theoretical density was achieved after a 3-h-long ...
Structural and morphological characterization of iron-doped sol-gel derived mullite powders
(Elsevier Sci Ltd, Oxford, 2020)
The structural and morphological properties of iron-doped mullite powders are the subject of the present study. The powders of undoped and iron-doped mullite in the composition range of 3-15 wt% Fe2O3 were synthesized by ...