Претраживање
Приказ резултата 11-20 од 226
Leaching properties of secondary lead slag stabilized/solidified with cement and selected additives
(Environment Protection Engineering, 2013)
Sodium lead slag, generated during secondary lead production, is characterized as hazardous waste. The aim of the study was to investigate leaching mechanism and behaviour of lead and arsenic from sodium lead slag previously ...
Short-circuit oxygen diffusion in thermally grown silica layer
(World Scientific Publ Co Pte Ltd, Singapore, 2010)
Amorphous polymer-derived Si-C-N ceramics can be doped with different elements (Al, B etc.) through various pre-ceramic polymer routes. Thus, controlling of the high temperature oxidation resistance can be achieved on an ...
Diffusion of polyphenols from alginate, alginate/chitosan, and alginate/inulin particles
(Wiley, Hoboken, 2019)
Thymus serpyllum L (thyme) aqueous extract was encapsulated within three different types of particles. Thus, electrostatic extrusion was applied to obtain alginate, alginate/chitosan, and alginate/inulin particles with ...
Synthesis of mesoporous nanocrystalline titania powders by nonhydrolitic sol-gel method
(Academic Press Ltd- Elsevier Science Ltd, London, 2009)
Mesoporous titania with well-crystallized anatase phase was synthesized by nonhydrolytic sol-gel process combined with solvothermal treatment. Titanium-isopropoxide, titanium-tetrachloride, and carbon-tetrachloride were ...
Field performance of micropropagated rubus species
(Acta Scientiarum Polonorum, Hortorum Cultus, 2016)
The objective of this study was to test yield and fruit quality of the red raspberry 'Meeker' and the blackberry 'Cacanska Bestrna' propagated using the standard method (ST) and in vitro, by tissue culture (TC). The monitored ...
Electrochemical impedance spectroscopy of a silver-doped hydroxyapatite coating in simulated body fluid used as a corrosive agent / Spektroskopija elektrohemijske impedancije prevlake hidroksiapatita dopirane srebrom u simuliranoj telesnoj tečnosti korišćenoj kao korozioni agens
(Serbian Chemical Society, Belgrade, 2012)
Titanium is a key biomedical material due to its good biocompatibility, mechanical properties and corrosion stability, but infections at the implantation site still pose a serious threat. One approach to prevent infection ...
The impact of manufacturing process on the content of hard triglycerides, hardness and thermal properties of milk chocolate
(Savez hemijskih inženjera, Beograd, 2012)
The rheological and physical properties of the chocolate mass depend on the ingredient composition as well as the manufacturing process. For the purpose of this work, a milk chocolate mass of identical composition and raw ...
A study of the photocatalytic degradation of the textile dye CI Basic Yellow 28 in water using a P160 TiO2-based catalyst / Proučavanje fotokatalitičke degradacije tekstilne boje CI Basic Yellow 28 u vodi koristeći P160 katalizator na bazi TiO2
(Serbian Chemical Society, Belgrade, 2012)
The photocatalytic degradation of the synthetic textile dye CI Basic Yellow 28 (BY28) in water, using a recently synthesized P160 TiO2-based catalyst, under Osram ultra-vitalux® lamp (300 W) light, was studied. The effects ...
Influence of picosecond laser pulses on the microstructure of austenitic materials
(Springer, New York, 2011)
We investigate samples of austenitic materials - stainless steel and iron-based superalloy - which are widely used at high temperatures and pressures. The samples were exposed to Nd(3+):YAG laser pulses with a wavelength ...
Controlled production of alginate nanocomposites with incorporated silver nanoparticles aimed for biomedical applications / Kontrolisano dobijanje alginatnih nanokompozita sa inkorporisanim nanočesticama srebra u cilju biomedicinske primene
(Serbian Chemical Society, Belgrade, 2012)
The production of nanocomposite alginate microbeads with electrochemically synthesized silver nanoparticles (AgNPs) based on the electrostatic extrusion technique was investigated with respect to their potentials for ...