Претраживање
Приказ резултата 11-20 од 71
Leaching properties of secondary lead slag stabilized/solidified with cement and selected additives
(Environment Protection Engineering, 2013)
Sodium lead slag, generated during secondary lead production, is characterized as hazardous waste. The aim of the study was to investigate leaching mechanism and behaviour of lead and arsenic from sodium lead slag previously ...
Short-circuit oxygen diffusion in thermally grown silica layer
(World Scientific Publ Co Pte Ltd, Singapore, 2010)
Amorphous polymer-derived Si-C-N ceramics can be doped with different elements (Al, B etc.) through various pre-ceramic polymer routes. Thus, controlling of the high temperature oxidation resistance can be achieved on an ...
Influence of picosecond laser pulses on the microstructure of austenitic materials
(Springer, New York, 2011)
We investigate samples of austenitic materials - stainless steel and iron-based superalloy - which are widely used at high temperatures and pressures. The samples were exposed to Nd(3+):YAG laser pulses with a wavelength ...
Synthesis of mesoporous nanocrystalline titania powders by nonhydrolitic sol-gel method
(Academic Press Ltd- Elsevier Science Ltd, London, 2009)
Mesoporous titania with well-crystallized anatase phase was synthesized by nonhydrolytic sol-gel process combined with solvothermal treatment. Titanium-isopropoxide, titanium-tetrachloride, and carbon-tetrachloride were ...
Field performance of micropropagated rubus species
(Acta Scientiarum Polonorum, Hortorum Cultus, 2016)
The objective of this study was to test yield and fruit quality of the red raspberry 'Meeker' and the blackberry 'Cacanska Bestrna' propagated using the standard method (ST) and in vitro, by tissue culture (TC). The monitored ...
Electrospun Poly(vinylbutyral)/silica Composite Fibres for Impregnation of Aramid Fabrics
(Materiale Plastice, 2014)
The poly (vinyl butyral)/silica (PVB/SiO2) composite fibers were produced by the electrospinning process. The experiments were performed with the PVB solution in concentration of 10 wt.% where ethanol was used as the ...
Adsorption kinetics of polyethersulfone membrane-supported hydrogels
(Desalination Publ, Hopkinton, 2018)
This study presents the route for preparation of the membrane-supporting materials with good mechanical behavior and adsorption properties that provide functionality and are easy to use in various environments. Polyethersulfone ...
Influence of surface modification to mechanical and thermal properties of nanomodified acrylic dental resin
(Inst Materials Physics, Bucharest, 2018)
This paper investigated the processing and characterization of dental nanocomposites based on poly(methyl methacrylate) (PMMA) matrix reinforced with zirconium dioxide (ZrO2) nanoparticles were prepared by in-situ free ...
Thermodynamics of mixed and pure aqueous solutions of K2HPO4 at T=298.15 K
(Maik Nauka/Interperiodica/Springer, New York, 2015)
Experimental results on isopiestic measurements for three ternary aqueous solutions of K2HPO4 with KCl, KBr, and KNO3 at T = 298.15 K were modeled with the Clegg-Pitzer-Brimblecombe equation based on mole-fraction-composition ...
Isopiestic Determination of the Osmotic and Activity Coefficients of the {yNa(2)HPO(4) + (1-y)K2HPO4}(aq) System at T=298.15 K
(Springer/Plenum Publishers, New York, 2016)
Isopiestic measurements have been made for aqueous mixtures of Na2HPO4 and K2HPO4 at T = (298.15 +/- 0.01) K, at Na2HPO4 ionic strength fractions y = (0.2023, 0.4060, 0.6027, 0.8007, and 1), using KCl(aq) as the reference ...