Search
Now showing items 1-10 of 1230
Analysis of the strain and hardness in self-cured and light-cured self-adhesive resin based cement
(Taylor & Francis Ltd, Abingdon, 2019)
The study showed an application of the 3 D Digital Image Correlation Method (3 D-DIC) for detection of von Mises strain in samples of the self-etch, self-adhesive resin based cement (RBC). The aim was to determine and ...
Rheological behaviour of thermoplastic poly(ester-siloxane)s / Reološko ponašanje termoplastičnih poli(estar-siloksana)
(Association of Chemical Engineers of Serbia, 2010)
Two series of thermoplastic elastomers (TPES), based on poly(dimethylsiloxane) (PDMS) as the soft segment and poly(butylene terephthalate) (PBT) as the hard segment, were analyzed by dynamic mechanical spectroscopy. In the ...
Utilization of baker's yeast (Saccharomyces cerevisiae) for the production of yeast extract: Effects of different enzymatic treatments on solid, protein and carbohydrate recovery / Primena pekarskog kvasca (Saccharomyces cerevisiae) za dobijanje kvaščevih ekstrakata - uticaj različitih parametara enzimske hidrolize na sadržaj suve materije, proteina i ugljenih hidrata
(Serbian Chemical Society, Belgrade, 2007)
Yeast extract (YE) was produced from commercial pressed baker's yeast (active and inactivated) using two enzymes: papain and lyticase. The effects of enzyme concentration and hydrolysis time on the recovery of solid, protein ...
Determination of the absolute hardness of electrolytically produced copper coatings by application of the Chicot–Lesage composite hardness model / ОДРЕЂИВАЊЕ АПСОЛУТНЕ ТВРДОЋЕ ЕЛЕКТРОЛИТИЧКИ ДОБИЈЕНИХ ПРЕВЛАКА БАКРА ПРИМЕНОМ CHICOT–LESAGE КОМПОЗИТНОГ МОДЕЛА ТВРДОЋЕ
(Serbian Chemical Society, 2022)
In this study, a novel procedure, based on application of the Chicot––Lesage (C–L) composite hardness model, was proposed for the determination of an absolute hardness of electrolytically produced copper coatings. The Cu ...
Mechanical and structural characteristics of atmospheric plasma-sprayed multifunctional tio2 coatings
(Materiali in Tehnologije, 2020)
Titanium dioxide (TiO2) is a multifunctional oxide that is an interesting material for many technological applications. This paper presents the mechanical properties and microstructure of TiO2 coatings resistant to dry ...
The influence of antioxidant and post-synthetic treatment on the properties of biodegradable poly(butylene succinate)s modified with poly(propylene oxide) / Uticaj antioksiodansa i načina izdvajanja polimera na svojstva biodegradabilnih poli(butilen sukcinata) modifikovanih poli(propilenoksidom)
(Serbian Chemical Society, Belgrade, 2007)
Novel poly(ester-ether)s based on poly(butylene succinate) (PBS) as the hard segments and 30 mass % of poly(propylene oxide) (PPO) as the soft segments were synthesized with varying amount of the antioxidant (N,N'-diphen ...
Microstructure and cavitation behaviour of alloyed austempered ductile irons
(Taylor & Francis Ltd, Abingdon, 2018)
In this paper, the study of cavitation behaviour of austempered ductile iron (ADI) alloyed with copper, as well as copper and nickel with a fully ausferritic microstructure, is presented. The ADI materials used were ...
Optimization of the recycling processes for magnesium from a highly contaminated waste
(Institute of Metals and Technology, 2014)
With the recently increased use of magnesium alloys, especially in the automotive industry, a large quantity of generated waste, based on magnesium alloys, is expected. Such a waste often contains many impurities such as ...
Polymer-Bonded Magnetic Materials with Various Nd-Fe-B Filler Content
(Polish Academy of Sciences, 2010)
One of the more important developments in magnetic materials, polymer bonded magnets, have opened a new world of application opportunities. The Nd-Fe-B/polymer composite materials offer an excellent combination of strong ...
Methanol oxidation at platinum electrodes in acid solution: Comparison between model and real catalysts / Oksidacija metanola na platinskim elektrodama u kiseloj sredini - poređenje model i realnih katalizatora
(Serbian Chemical Society, Belgrade, 2006)
Methanol oxidation in acid solution was studied at platinum single crystals, Pt(hkl), as the model catalyst, and at nanostructural platinum supported on high surface area carbon, Pt/C, as the real catalyst. The linear ...