Претраживање
Приказ резултата 21-30 од 182
Kinetic modeling and oprimization of fixed-bed reactor for Fischer-Tropsch synthesis
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2015)
Fischer-Tropsch synthesis (FTS) is a heterogeneously catalyzed chemical reaction in which a mixture of hydrogen and carbon-monoxide is converted into an array of hydrocarbon products. These products can be used as synthetic ...
Application of lignocellulolytic fungi for bioethanol production from renewable biomass / Primena gljiva koje razgrađuju lignocelulozu za proizvodnju bioetanola iz obnovljive biomase
(Association of Chemical Engineers of Serbia, 2015)
Pretreatment is a necessary step in the process of conversion of lignocellulosic biomass to ethanol; by changing the structure of lignocellulose, enhances enzymatic hydrolysis, but often it consumes large amounts of energy ...
The effect of salinity on the sorption of cadmium ions from aqueous medium on Fe(III)-sepiolite / Uticaj saliniteta vode na sorpciju jona kadmijuma na Fe(III)-sepiolitu
(Association of the Chemical Engineers of Serbia, 2015)
In this study, the sorption of cadmium ions onto sepiolite modified with hydrated iron(III) oxide, Fe(III)-sepiolite, has been investigated in natural seawater, artificial seawater, aqueous solution of NaCl of the same ...
Formic acid electrooxidation on carbon supported platinum catalyst with preferential plane orientation / Oksidacija mravlje kiseline na platinskim katalizatorima na ugljeničnom nosaču sa preferencijalno orijentisanim ravnima
(Savez inženjera i tehničara Srbije, Beograd, 2015)
Pt-based nanocatalysts supported on Vulcan XC-72R carbon, were prepared by water-in-oil microemulsion method, with addition of various amounts of HCl in the water phase. Polyethileneglycoldodecylether (BRIJ 30) was used ...
The effect of cooling rate of slag from primary copper production in the valorization of copper in the flotation process
(Savez inženjera metalurgije Srbije, Beograd, 2015)
Technological procedure of slow cooling slag from primary copper production is applied in the purpose of copper recovery in the level of 98.5% to blister. This technological procedure is divided into two phases, first slow ...
Thermal Resistance of Alkali Activated Binders Synthesized Using the Fly Ash and Steel Slag
(Belgrade : Materials Research Society of Serbia, 2015)
The thermal resistance of alkali-activated binders based on fly ash (FA), electric arc furnace slag (EAFS) and their FA/EAFS blends was assessed. Compressive strengths of samples before and after firing were measured. The ...
Modeling of density and calculations of derived volumetric properties for n-hexane, toluene and dichloromethane at pressures 0.1-60 MPa and temperatures 288.15-413.15 K
(Srpsko hemijsko društvo, Beograd, 2015)
Densities data of n-hexane, toluene and dichloromethane at temperatures 288.15-413.15 K and at pressures 0.1-60 MPa, determined in a previous article, were fitted to the modified Tait equation of state. The fitted ...
A method for determination of separation properties of membranes / Metod za određivanje separacionih svojstava membrana
(Bosnia and Herzegovina : University of East Sarajevo, Faculty of Technology, 2015)
In this study, design of lab scale device for determination of separation properties of membranes is presented and analyzed. Device operates with different gas pressure between chambers, whereby gas streams perpendicular ...
Effect of surface modified TiO2 nanoparticles on thermal, barrier and mechanical properties of long oil alkyd resin-based coatings
(Budapest Univ Technol & Econ, Budapest, 2015)
Novel soy alkyd-based nanocomposites (NCs) were prepared using TiO2 nanoparticles (NPs) surface modified with different gallates, and for the first time with imine obtained from 3,4-dihydroxybenzaldehyde and oleylamine ...
The possibility of application of zeolyte powders for the construction of membranes for carbon dioxide separation
(Savez hemijskih inženjera, Beograd, 2015)
The aim of this study was to construct a polymer-based mixed matrix membrane that could be used for waste gases treatment. Therefore, high permeability for the carbon dioxide and low permeability for other gases commonly ...