Претраживање
Приказ резултата 21-30 од 895
Adhesion characteristics and corrosion stability of epoxy coatings electrodeposited on phosphated hot-dip galvanized steel
(Elsevier Science Sa, Lausanne, 2008)
The influence of hot-dip galvanized steel (HDG) surface pretreatment with phosphate coatings on the corrosion stability and adhesion characteristics of epoxy coatings electrodeposited on HDG steel was investigated. Phosphate ...
Oxygen reduction reaction on Pt(111): effects of bromide
(Elsevier Science Sa, Lausanne, 1999)
Using the rotating ring-disk technique (RRDE) the oxygen reduction reaction (orr) was studied on the Pt(111) surface in the presence of Br- anions. We found that the orr at the Pt(111) \ Br-ad interface is always accompanied ...
The kinetics of the thermal degradation of isomeric dipropyl and dibutyl esters of poly(itaconic acid)
(Pergamon-Elsevier Science Ltd, Oxford, 2000)
Non-oxidative and oxidative thermogravimetry was performed on poly(di-n-propyl-) (PDnPI), poly(di-iso-propyl-) (PDiPI), poly(di-n-butyl-) (PDnBI), poly(di-iso-butyl-) (PDiBI) and poly(di-sec-butyl itaconate) (PDsBI). The ...
Recycled-wool-based nonwoven material as a sorbent for lead cations
(Wiley, Hoboken, 2003)
The aim of this study was to investigate the sorption properties of a recycled-wool-based nonwoven material for lead cations. To improve sorption properties, the material was treated with low-temperature air plasma and/or ...
Synthesis and characterization of interpenetrating polymer networks with hyperbranched polymers through thermal-UV dual curing
(Elsevier Science Sa, Lausanne, 2008)
The aim of this study was to investigate the possibility of using acrylated hyperbranched polyesters (HBP) as UV curable component in dual curing automotive applications. Dual curing is one of possible ways to obtain fast ...
The Role of SnO2 on Electrocatalytic Activity of PtSn Catalysts
(Springer, New York, 2018)
In our previous paper, we described in detail studies of Sn influence on electrocatalytic activity of PtSn catalyst for CO and formic acid oxidation (StevanoviAc et al., J. Phys. Chem. C, 118 (2014) 278-289). The catalyst ...
Antifungal efficiency of corona pretreated polyester and polyamide fabrics loaded with Ag nanoparticles
(Springer, New York, 2009)
This study discusses the possibility of using the corona (electric discharge at atmospheric pressure) treatment for fiber surface activation that can facilitate the loading of Ag nanoparticles (NPs) from colloids onto the ...
Influence of the damage level during quenching on thermal shock behavior of low cement castable
(International Institute for the Science of Sintering, Beograd, 2010)
In the recent decades, the use of unshaped monolithic refractories has been increasing greatly because of their significant advantages over other shaped refractory bricks of the same class. A low cement high alumina castable ...
Corrosion stability of cerium-doped cataphoretic epoxy coatings on AA6060 alloy
(Wiley-VCH Verlag Gmbh, Weinheim, 2016)
In this study, corrosion protection efficiency of undoped epoxy and epoxy coating doped with cerium on aluminum alloy AA6060 is evaluated over prolonged exposure to 3wt% NaCl solution by electrochemical impedance spectroscopy ...
Synthesis and characterization of poly(2-hydroxyethyl methacrylate/itaconic acid) copolymeric hydrogels
(Springer, New York, 2009)
In the present study poly(2-hydroxyethyl methacrylate-co-itaconic acid) (P(HEMA/IA)) hydrogels were synthesized by free-radical copolymerization of 2-hydroxyethyl methacrylate and itaconic acid in order to evaluate as ...